mtnl broadband plan

Perixx PERIPAD 701 - Wireless Multi-Gesture Touchpad

2012-02-05T08:58:00.001-08:00

Perixx PERIPAD-701 is the latest wireless multi-gesture Touchpad along with backlight keyboard. The box contains a Mini-USB cable to charge the battery that displays range of about 10 hours. There is a small LED next to notify you the battery level: blue, red, one must remember to recharge. In addition we get MiniUSB, a Power mode that allows the switching on and off (for longer battery life) by pressing it for 2 seconds. Talking about lit, this button is to switch the touchpad's mouse pointing mode keyboard mode, which shows the illuminated keys.

Perixx PERIPAD-701 is very compact weighing just 140 grams measuring 169 x 127 mm from side, and thickness of 8 mm. This is far from the congestion mediacenter keyboard with touchpad or classic trackball, however they offer better ergonomics of the keys. Those on PeriPad are certainly numerous, but measure only 12 x 8 mm wide, occupying all the space touches. Like all RF devices, it offers an excellent range of about 10 meters without having to point the mini USB receiver supplied automatically detected by Windows XP, Vista or 7.

The touch panel backlit keys are clearly visible when the room is dark enough and when it is illuminated, even if their visibility is reduced. The pressures on these virtual keys are followed by a slight beep, bit disturbing, but ultimately very useful to know if the seizure has been validated.

Multitouch mouse pointer:

The entire surface is multi-touch, but there is no dedicated area to left click and right click. Perixx has used different ploy to try to reproduce the various functions of a mouse like:

Moving the mouse: slide your finger across the touchpad
Left click: type (strong) once on the touchpad
Right-click: Press and hold the touchpad (for 2 sec)
Double click: type (strong) twice on the touchpad
Select items, drag / drop: type (strong) twice on the touchpad and then slide your finger to select or move items.
Horizontal and vertical scroll: slide two fingers simultaneously up / down or left / right
Rotate / Zoom: pinching the trackpad like on a smartphone

Mostly multipont are managed, but we have already seen other touchpad uses to manage 3 or 4 fingers to perform various actions but its missing in Peripad 701. But even if the device remains functional in most of the time, it is disappointed that the function to move the selected items, or drag / drop are little unreliable that requires a sequence and perfect timing between the double tap on the touchpad, followed by sliding the finger...
Reply With Quote
#2
Unread 2 Weeks Ago
Orton's Avatar
Orton Orton is offline
Member

Join Date: Apr 2009
Posts: 593
Re: Perixx PERIPAD 701 - Wireless Multi-Gesture Touchpad
Keyboard mode with mouse control:

The keyboard mode is even very attractive. First it was used to get the location of the keys tactile, remember the first few hours with your smartphone. Luckily it's a QWERTY keyboard that offers almost all the keys on a normal keyboard, including the function keys F1 through F10, with additional multimedia control keys as a bonus. It regrets that the keys interesting use media center, namely the arrow keys, Enter, Backspace, and Escape, are poorly positioned. Once again we can use them confidently without having to take a look at the illuminated keys.

It is also possible to control the mouse, without having to physically press the Mode to switch back to the mouse pointer. Just actually pressing a key on the top left corner or upper right, represented by a mouse. As long as you press one of these buttons, you stay cursor mode, and can use your other hand to scroll the cursor, click, double click, move items ... However in this mode, there is no multipoint mode.

Conclusion:

Peripad Perixx 701 is the best alternative of traditional media center keyboards, even if it does not really comfort or the accuracy of models with optical trackball. The main advantage of Peripad is its compact, that allows you even to easily hide it anywhere in the room. Similar to any other touch device, you quickly get used to the positioning of the keys on the keyboard, but the disappointment is nevertheless that the directional buttons, input and back are not more ergonomic, it's bad for media center users.

The trackpad mode works fine, but the area is not very touch sensitive, and therefore requires exerting “heavy pressure” for click and double clicking. Another problem is with managing drag / drop or move selected objects, which requires perfect coordination to be taken into account. Yet its not a bad device or a mini keyboard for HTPC use complies fully with keyboard / mouse for just 69 Euros.

Pros:

Compactness
Rechargeable Battery
Management multitouch
Backlit keyboard
Many keys
2 year warranty

Cons:

Trackpad insensitive
Drag & drop management
Not great for controlling a Media Center with the arrow keys

Reply With Quote

Samsung 23 Inch 750 Series 3D LED Monitor

2012-02-05T08:57:00.000-08:00

3D LED Monitor is a new innovation in Display series. After getting out from theaters 3D technology is no coming up on your desk. You can simply enjoy the benefit of 3D look on your own PC Monitor. Samsung provides a 23 Inch 3D LED Monitor. 3D + LED just make this monitor much better than others. You will not only get a realistic look but also high resolution vibrant colors which are hardly seen on any other. The monitor series is specially designed for 3D content which is taking a firm place in the market. Today there are ample of 3D Monitors which are costly enough to hit your budget hard. But if you are ready to spend then 23" is not a bad size. You must remember that 3D has some requirements. You cannot just connect the monitor and enjoy low resolution videos on it. The technology comes with limitation. A good gpu with HD content which supports 3D is a must. There are ample of games that are coming with their 3D version which can only be seen on such special hardware. Gaming consoles are not behind here. Companies are working to give you 3D support with motion gesture. I found the model a bit impressive under Samsung. Some special features of this LED monitors is it has Lifelike colors. You can enjoy around 1080p HD display in 2D and in 3D also. Equipped with 3D glasses the monitor does not need any additional support. There are two variations in this series. One comes in 23" and the other one in 27". So as per your need you can choose the size.

If we talk about some quick features then the points which come ahead are Lifelike colors. Many are wondering that this will be some kind of new technology or feature. You are correct. Samsung is a market leader in consumer products and this is one o the new innovation. Under this you can see life like images which is one word means extremely-realistic. This can be found both in 2D and 3D. The ultra clear panel and 100% Photo Accuracy offers you vibrant and accurate color. You can view a high detailed image under this. The current setup is accompanies by a pair of 3D glasses. The 3D Glasses are supported by inbuilt sync emitter to offer you smooth syncing with video quality. This is just not enough, it also has TriDef 3D gaming software. Many of us are not aware what TriDef 3D Tool is. I will explain you in detail about the same. TriDef 3D is a complete package which offers you to play 3D games. So this is called as smart thinking where you do not need to re-configure your PC for making it a 3D ready system. Samsung 23 Inch 750 Series 3D LED Monitor also has an Eco Motion Sensor. Now what does this do. This is a sensor which turns on and off your monitor as you come and go. That means if you are not in the front of monitor it turns it off and also it adjust the brightness of monitor as the room light, so that your eyes is not affected.

Features :

Extremely Lifelike Colors : Samsung’s top of the line panel creates extraordinarily lifelike images, in both 2D and 3D. Technologies like Ultra Clear Panel and 100% Photo Accuracy take color vibrancy and accuracy to the next level.
1080p Resolution in 2D and 3D : 1080p Resolution in 2D and 3D Unlike passive 3D technologies, which cut the resolution in half, Samsung’s technology allows you to see every detail in Full 1080p HD.
Complete 3D Solution in the Box : Includes everything you need to get going: one pair of 3D glasses, a built-in sync emitter, and DDD’s TriDef 3D gaming software.
Eco Sensors for Unparalleled Convenience : Work Smarter with Samsung's Simple Eco Solution the Eco Motion Sensor automatically turns the monitor on and off as you come and go. The Eco Light Sensor automatically adjusts the brightness to match the room lighting, reducing eye strain.
See the next level with the 3D HyperReal Engine : A 3D Experience stunning, comfortable and true to life. Samsung achieves the very highest standard in 3D entertainment with its 3D HyperReal Engine. It is a brain-like technology that allows the SA950 series to control color, contrast, 3D effects and motion for mind-blowing results.
A Brighter 3D Experience : Don’t like wearing sunglasses indoors? Samsung's 3D monitor glasses let twice as much ambient light through as competing technology. Because Samsung built all parts of this 3D experience, it optimized the coordination of the panel backlight and glasses shutter.
Optimize your viewing experience with Eco Light Sensor : Take the strain out of watching images on your monitor with Samsung’s Eco Light Sensor. The Eco Light Sensor automatically adjusts the brightness of the Samsung LED Monitor by measuring the intensity of the light within the room.

Specification :
3D LED
Ultra Clear Panel
1920x1080 Resolution
sRGB Coverage
120 Hz Panel Frame Rate
250 cd/m2 Brightness
2ms (GTG) Response Time
Mega ∞ Dynamic Contrast Ratio
170°/160° Viewing Angle
16.7M Color support
Magic Picture Controls
Magic Angle
Real 120Hz Input, 2D to 3D Conversion, DDD TriDef Software Included, Eco Motion Sensor, Eco Light Sensor, Eco Saving, Multi Screen, Off Timer, Customized Key, Image Size
48W Power / 1W standby
RoHS Complaint

Reply With Quote
#2
Unread 1 Week Ago
Spykar Spykar is offline
Member

Join Date: Oct 2005
Posts: 322
Re: Samsung 23 Inch 750 Series 3D LED Monitor
Design

Samsung 23 Inch 750 Series 3D LED Monitor has nice and slick design. It is thin and is very light. The design looks really a catchy which will make your desk more attractive. More appear is the dock on which the monitor stands. The lower end of the monitor provide a awesome dock with Samsung logo over it and without any buttons, this makes the monitor a more professional model. The below dock and stand provides ample of support to the monitor. You can title it as per your requirement. Because of the stand the monitor looks a bit more organized then other. The reason can be seen by having a look on the rear side. All connection are embedded on the below stand instead of backside, which is common in many monitors. The stand offers a touch support kind of controls which makes it easier to configure the monitor settings. On the backside you get 1 HDMI, 1 DPIN, Headphone and power connection. It is not just the stand but a kind of DisplayPort connector which helps you to look more organized.

Samsung has done a great improvement in the design of its 3D LED monitor. Adjustments are easy with think design and vibrant colors. There is nothing much to criticize about the design. Like other monitors the one thing this has in additional and awesome stand with great looks. A think clear widescreen monitor. The 27" looks better in this. A wider display is capable of offering you a much better look while playing games or while viewing movies. The stand itself has front control buttons which work on sensor while touched. They are touch sensitive’s buttons. One thing which I want to mention is the 3D button. This button is on the top of the stand. By pressing it you activate the 3D technology and this is the time to glasses. Or else you can enjoy the same in 2D also. This is something better done here. It has simple arrow keys to navigate and the center button to choose the option. Glossy look offers the monitor a eye catching ability.

Resolution

As I had told before that if you need optimum performance from it without loosing the quality then you need to have a good gpu. A gpu that supports 3D output. Or else you might need to struggle hard to get the right output. Rightnow there are ample of good gpus in market. You can choose a reasonable which can offers you 3D frame rates. Rightnow Nvidia offers a 3D vision kit which comes with a receiver and glasses. Till yet it is found to be a successful product. But under this model all this are present. If you do not have a good gpu you might fail to get a good performance. So if you are trying to setup a 3D game then it is better that you must first look into your gpu and upgrade it. I am not telling you to go for a high end gpu. And along with that upgrade your psu also. Once all is installed your 3D home system is up. This is a hard hit on the budget but not much for the geeks.

If you are planning to upgrade for a higher resolution then this is the time to think for a 3D display. Because in the coming future many products will support 3D and technology is not on your desk. Surely this will be cheaper in the coming future. Talking about the resolution, there is better competition still in the market. Company tends to provide a bigger size monitor at a very reasonable rate.

Conclusion

Now the bottom point is to go or not to go for 3DLED. I will recommend going for the same if there are such kind of products. At a price $449 I will not consider this monitor as bad choice. It can be a valid investment for those who want to go for upgrade and for those who are planning to go for high end system. Today mostly we plan to go for a mid range multimedia system and gpu is a much requirement. In that case spending a bit amount higher for this product is good to go.

For MAC users I want to notify that this monitor has no 3D support. So if you are using a Mac system and want to go for 3D Monitor then look for different models or read this specification of this product in details. It is clearly stated that it does not support 3D for Mac system.
Reply With Quote
#3
Unread 1 Week Ago
Romaan444 Romaan444 is offline
Member

Join Date: Jan 2012
Posts: 1
Re: Samsung 23 Inch 750 Series 3D LED Monitor
In my opinion its a good monitor, with sharp & clear picture quality. Of course the size is smaller as compared with the popular sizes, but its still good as far as the affordability is concerned.
Reply With Quote
Reply

Samsung Galaxy W Smartphone

2012-02-05T08:55:00.001-08:00

Samsung galaxy W which was announced last year along with Galaxy Y, Galaxy M Pro has finally come into our hands and its time to review this great product. Samsung galaxy w a.k.a wonder range, features good performance mixed up with good design. So lets have a good look at the phone.

Design

Looking at the design of the phone, again we see a lot of similarity to the galaxy phones that has been launched before. Samsung smartphones designs have become somewhat generic.

The only thing that is different in Samsung GALAXY W is its flat upper side and curved bottom. You will not notice it when you hold the phone straight but when you tilt it a bit you will notice the difference. Back part of the phone is a hard glossy plastic which are just dotted. So that you can feel comfortable holding the phone. Frankly speaking the phone looks good in our hands since it does not have a huge screen size(3.7 inch), it is thin at 0.45” (11.5mm), also very light to hold (112g).

The lock/power button of the phone is on the right side while volume buttons on the left, and headphone jack is at the top.

Specification and Features

- Samsung Galaxy W manages to get a 1.4GHz CPU that will ensure a good performance. On addition to that it also has Adreno 205 GPU; Qualcomm MSM 8255Т chipset; 512MB RAM; 1GB ROM.
- Internal memory storage is 2GB and also have a external memory that can be extended upto 32GB.
- In terms of camera it has 5 megapixel auto-focus camera, that has face detection technology, HD (720p) video recording at 30fps, LED flash. Front facing vga camera for video calling.
- Wi-Fi b/g/n; Hot-spot and DLNA connectivity, HSDPA which will ensure 14.4 mbps speed in 3G connection as well as HSUPA.
- Android 2.3.5 Gingerbread operating system with TouchWiz 4.0 launcher
- Bluetooth 3.0
- GPS with A-GPS
- Inbuilt fm radio.
- Web browser with Flash 11 support.

Performance

On checking out the web browsing performance of the phone we were happy to see a good performance in it. Some basic feature such as tapping, zooming and all were working quite smoothly, the side by side view of all the opened tabs is an interesting feature to look out in this phone.

Lets look at how smooth is the interface of the phone and on checking out we found it to be as smooth as silk. All thanks to the TouchWiz 4.0 interface , it has given us new icons, nice animations and lots of tools that will make the interface further more simple. The on screen board of the phone is very much responsive and works well even in the landscape mode.

Few clicks from this phone turned out to be a good one. As the phone is running on a TouchWiz 4.0 interface it gives us TouchWiz broad selection of shooting modes, scenes and effects, as well as touch focus, macro mode, and even blink detection. Even the hd video recording was good, gave some effects in the dull lights.

The voice clarity of the phone is not so good as expected. The sound output in headphones also lack some effects.

The 1500mAh Battery is said to last upto 7.83 hours(talktime) but it got emptied very much early and hence much like other Samsung phones, battery is also a concern over here.

Conclusion

Samsung galaxy W impresses us with its performance. It has lots of pre installed apps like Office document viewer/editor, AllShare. Plus the 3.7-inch LCD display gives us some stunning graphics in the phone. Above all it has a Adobe Flash support that means you can enjoy every bit of web in your phone. The camera is great and even the music applications.

However if we look at the negative side of the phone then the battery disappoints, even the headsets they are not clear, the sound quality when we are on the call is also not good.

Samsung has not made any announcements on the possible upgrade of the OS for this phone. I am talking about the ice cream sandwich. So that would be a big concern for the buyers whether their product would be upgraded or not. Unlike the Sony Ericsson who are promising an upgrade for every product they launch.

It has been launched to compete against Sony Ericsson Xperia Neo and the HTC Desire S. Both the phones have a distinct designs unlike the Samsung one. It is being launched in the market at a price of Rs.19,000. So a lot has to be seen as if how well it does fare in the market. This phone is now available in majority of the countries.
Reply With Quote

Samsung Galaxy Ace Plus smartphone

2012-02-05T08:54:00.001-08:00

Samsung galaxy ace plus a new entrant in the galaxy range. It’s a heir to the Samsung galaxy ace which was launched last year. Now let’s see what new features have been added to this new phone, the cpu speed has been increased to 1GHz. Also the screen size has been increased to 3.65”. Overall it does not have a design and performance that everyone can talk about but it’s a phone that is making its name in the value for money category. So let’s unfold each and every feature of the phone step by step.

Design

Nothing much changes has been made to the existing one, the body is made of the same material, i.e. the shiny black plastic which often feels slippery. The screen size has been upped to 3.65” that ensures that we can reach every part of the phone with the single hand.

Samsung has kept the same old HVGA resolution in this phone as well which I think is the biggest drawback. It has a below average pixel density that does not appeal to the current interface. The only positive thing is the brightness of the screen. The screen does looks good even In the brightest places. Even the side way display of the screen is good. So that’s a plus point.

It only has a 5 megapixel camera with LED flash situated at the back of the screen. The volume keys are on the left side of the phone whereas the headphone jack is at the top and power key on the right side of the phone.

The overall dimension of the phone is 114.5 x 62.5 x 11.2 mm and weighs 115 grams.

Specification and features

It’s time to have a very close look at the specifications and the features of this phone.

1) In terms of connectivity Phone supports 3G connectivity(HSDPA), wifi, DLNA and hotspot as well. for quick transfer this is Bluetooth 3.0 support and usb 2.0 support.
2) Camera is 5 megapixels and has only one camera no front camera and it supports VGA video recording.
3) In terms of memory it has 3GB internal storage memory and can be expanded upto 32GB via. Micro sd card. RAM is 512MB.
4) It has got 1GHz processor powered by Android OS, v2.3 (Gingerbread).
5) Adobe flash support is there in the browsers.
6) Many imnbuilt apps like MP4/H.264/H.263 player, Organizer, MP3/WAV/eAAC+ player, Document editor, Voice memo/dia, Predictive text input , Image editor and many more.
7) Standard Li-Ion battery, 1300 mAh.

Performance

In spite of mentioning the flash support in the browser of this phone, the browsing experience is just average. Well some pages do take a lot of time to load and also some videos do play with a lot of interruptions.

The interface is quite good, the all new TouchWiz 4.0 interface is just a welcome addition for this Samsung phones. The performance of Gingerbread on this 1GHz processor is quite good and does not lacks even in a single stage. Internal memory and ram memory is quite sufficient for this phone.

The camera with 5 megapixel quality and LED flash is somewhat average. The captured images fails to express in details and also the camera has some problems In the focusing. The camera interface hosts all the necessary features such as Panorama mode and Continuous shooting which is quite common in all the Samsung phones. There is nothing to write about video recording, so lets keep that aside.

Now coming to the multimedia sections the TouchWiz 4.0 music player is also a average thing, there is nothing much to write about over here, all the features can be found out in majority of the music players. It would have been great to have a feature like ‘Beats Audio’ which was seen in HTC Sensation XE to be implemented in this phone as well. the sound quality of the phone is average. Talking about the video playbacks then it does not support DivX and Xvid formats. Which is a major setback considering the fact that majority of the Samsung android phones do play that files.

Talking about the voice clarity over the call, clarity is good but the volume is quite low. It would be very difficult to talk on this phone when we are on a busy market or in some traffics.

The battery has always been a problems with all the Samsung phones and the same is the case over here. The phone has been gifted with 1300mAh battery compared to the 1500mAH battery that other Samsung Smartphone’s have. So don’t expect your battery to last even for a single day.

Conclusion

Overall the phone looks average in terms of design as well as performance. Although we are much relived to hear that it is being placed in the same price range as that of the ACE(not kept in the higher price range), but still there are many alternatives for the users to opt for in that range.

If we take a good example, then Xperia Neo V is a good phone, even xperia arc and also nokia is coming up with its Lumia in the same range and Lg launching optimus black, it would be a hell lot of competition for this phone. There is no doubt that the price of the phone will definitely come down but what about the features? Where the same range android phones from Sony and LG are offering more features then this Samsung galaxy ace plus.

If I had to rate this phone on a scale of 10. I would just give it a 5.
Reply With Quote
#2
Unread 1 Week Ago
Memphis M Memphis M is offline
Member

Join Date: Jul 2011
Posts: 1,414
Re: Samsung Galaxy Ace Plus smartphone
Frankly speaking i am not at all impressed with the phone. So i would not go with this phone at all.

Dont know why samsung people are coming up with such kind of phones.
Reply With Quote

Sony Vaio F Notebook

2012-02-05T08:53:00.000-08:00

Sony is known for making some cool notebooks with really good configuration and this time it comes with the F range notebooks. F.Y.I ‘F’ means full-featured. Yes their naming conventions have always been funny but we don’t care as far as we are getting some good quality product in our hands to operate on.

Looking at the Sony VAIO F VPCF234FX/B configuration we can identify it has a 16-inch screen, a screen size which is well played for the desktop users as well as the notebook users, sharp angles and a raised wrist rest. Looks definitely attracts you towards the notebook. However if we look at the recent launch of many notebooks then there is one notebook that comes close to the Sony vaio F series, it is the HP's 15-inch Envy 15. However considering the fact that both are being offered at the same price, it would be well worth to go with the Sony vaio F series rather than the HP one.

Now this was just a brief description of the notebook. Now its time to have a close look at the notebook. Lets begin with the design first

Design

The body of the notebook is black matte plastic lid which is kept quite simple the only thing that is looking designed in the vaio sign and nothing else. The lid of the notebook falls a half-inch shorter than the bottom deck, which gives a prominent bottom lip, that consists of indicator lights for battery, wireless, and the SD card reader.

Talking about the interiors of the notebook, even the interiors do not flaunt a sparking look even that is covered by a black matte plastic with few finishes here and there. As I have already mentioned above the raised palm wrist is an interesting feature in the notebook which looks quite attractive and also it has a large backlit keyboard which suites the notebook. Some other controls like the Touch-sensitive media controls as well as buttons for VAIO Assist, the web browser, VAIO Media Gallery, and power are located directly above the keyboard.

It measures 15.7 x 10.7 x 1.3-1.7 inches and weighs around 6.6 pounds.

Specification and Features

Since we have taken the Sony VAIO F VPCF234FX/B into consideration while doing the review work so we will provide the specifications as seen in this notebook.
- Sony VAIO F VPCF234FX/B is powered by a 2-GHz Intel Core i7-2670QM processor.
- 6GB RAM, 640GB, 7,200-rpm hard drive
- Nvidia GeForce GT 540M GPU with 1GB of VRAM.
- 16.4 inch screen supporting 1920 x 1080p resolution.
- 1.3-megapixel webcam

The config will change as the model changes. Now you will be pleased to know that sony is also offering a 3D display version of sony vaio f series which is priced at $1,799.

Now time to move on and look at the different features of the notebook.
We decided to check the keyboard of the notebook and it did look good to us and very comfy while typing. Synaptics touchpad which is integrated with the palm rest is a great pleasure to have it in the notebook and makes the scrolling through the pages very much easy. The mulititouch gestures such as pinch-to-zoom, two-finger flick, and rotation were very responsive. VAIO F's 16.4-inch matte 1920 x 1080p LED backlit display gave us crisp detail with vibrant color, is a pleasure to watch. Even it has a very clear audio output. With the help of the Dolby Home Theater control panel we were able to switch between different audio modes such as movie, music, and gaming presets.

Sony packs in some great softwares which are a real gem for the notebook. One of the best example is the bloatware king many such software’s can be easily found out in the Vaio Gate shortcut bar that floats along the top edge of the screen. There are bundles of programs available there from video editing software’s to games. You will love it.

The right side of the notebook has a tray-loading Blu-ray player, a USB 2.0 port, a headphone jack, and a microphone jack. You will also get a Firewire 400 port, 4-in-1 card reader exactly on the front side of the notebook. Other than that 2 USB 3.0 ports, Ethernet, VGA, HDMI, and the power jack are placed on the left side of the notebook. There is a 1.3 megapixel camera which shoots some great pictures.

The Sony VAIO F comes with a one-year limited warranty with onsite/in-home service and phone support

Performance

Coming to the performance, the 2.2-GHz Intel Core i7-2670QM processor and 6GB RAM gives out some real brutal power and it beats up many notebooks that comes in that range. It hardly takes a minute for the Sony VAIO F VPCF234FX/B to boot up the 64-bit version of Windows 7 Home Premium. The Nvidia GeForce 540M is a impressive GPU, and the system ran our Street Fighter IV test at full 1,920 x 1,080 resolution at an impressive 44.7 fps. We also conducted a multimedia multitasking test and it fisnihed the test with a impressive score of 406 seconds. The same was the case with the Adobe Photoshop CS5 image-processing test is emerged as a runner up after Dell xps 15. Frankly speaking we were very much impressed with the performance it has outclassed in majority of the tests that we performed on it.

Talking about the battery life, the notebook lasted 3 hours and 48 minutes. Which I think is a good rate considering today’s notebook and the amount of performance it has given.

The notebooks that were used for the testing along with Sony VAIO F VPCF234FX/B was Dell xps 15 and Gigabyte P2532.

Conclusion

Priced at $1,399 Sony Vaio has 16.4-inch 1080p display, good processor, 6GB ram and various multimedia software's inbuilt in it. It has not disappointed us with the performance, very snappy but only thing that would be a concern is the price. Dell XPS 15 is also offering the same hardware config at a price of $1,099. However you must have read the whole review. Till that time you might have made up your mind with which you would like to go ahead.
Reply With Quote
#2
Unread 6 Days Ago
JoanaJhon JoanaJhon is offline
Member

Join Date: Jul 2011
Posts: 1,381
Re: Sony Vaio F Notebook
Yes price is a concern for this notebook. A little bit of decrease in the price would be a good thing to look out for. Rest everything is perfect of this notebook.
Reply With Quote

Acer ICONIA TAB A200

2012-02-05T08:50:00.001-08:00

Acer this time has decided to come up with a model that is not so good looking but definitely well placed in terms of budget. Coming with a huge 10.1 inch screen and a android honeycomb operating system dependability, it will definitely target some low budget tablets like Amazon Kindle and NOOK Tablet. Anyways this was just a small introduction of the tablet, we have got more for you in the following review. So read on to know more

Design

Looking at the design of the tablet it seems to be highly inspired with the design of A500. tapered top and bottom edges are some of the things that make you remind about the A500. However the A200 has got a textured rubbery back cover that gives a good grip for your hands, It has a 10.1” WXGA (1280 x 800) LCD display but it fails when it comes to viewing some good quality. The viewing angles are quite poor. Forget about using this tablet for the outdoor, you will hardly be able to see anything.

The sides of the tablet is featured with usb ports, micro usb ports, charging port, microsd card slot, volume rocker buttons and lock key. The microSD card slot and manual reset button are found at the bottom of the tablet which makes us very difficult to open the tablet and use them, that’s a bad thing.

There is a 2 megapixel camera at the front which is quite ok for the video chat and there are left and right speakers as well for entertainment purposes.

Specification and features

Here are the specifications of this tablet
- Operating system: Android OS, v3.2 (Honeycomb), planned upgrade to v4.0
- Nvidia Tegra 2 T20 chipset
- Dual-core 1 GHz Cortex-A9 processor
- Adobe flash support
- Java support
- 260 x 175 x 12.4 mm dimension
- 8/16 GB internal memory, Expandable memory upto 32GB. 1 GB DDR2 RAM
- Standard battery, Li-Po 3260 mAh

The interface of this tablet is quite good and as soon as we enter the screen we are greeted with the Acer Ring. it allows to scroll to our bookmarks, volume control and various shortcut controls are there in that Acer Ring. The look has been improved, the customization of this tablet is limited and does not extend much to every features.

The touch of the tablet is quite average we w even checked the on screen keyboard of the tablet and it appears to be quite responsive. Ok to do the daily typing task.

With the help of the flash support, the web pages do get loaded very quickly and quite correctly. There is no themeing issues seen.
Gmail and some inbuilt apps like YouTube, Google Talk, Picasa integration are very well placed and are very simple to install as well as use.

The 2 megapixel camera ends up capturing some average images while the vga recording is has nothing to be mentioned over here.

There is nothing much to mention about the music player, interface is kept quite simple but the speakers do produce some good sounds. Sadly there is no video-out connection but to compensate for that there is a DLNA functionality.

Performance

A200 has a 1GHz dual-core NVIDIA Tegra 2 processor. Which performs quite good with the basic task that is assigned to it but when we load it with the high intense task then it begins to start crumbling a bit, appears to be choppy and its responsiveness does reduces a lot.

The battery of the tablet can last entire day with just 50% of the battery consumption. The wifi connection was quite strong and there was no broken connection in the middle of the process. The video player can play maximum formats such as MP3/WAV/WMA/eAAC+/ XviD/MP4/H.264/H.263.

Conclusion

Acer ICONIA TAB A200 does lack some basic features like rear camera or a wired video-out functionality that is normally seen in the honey comb tablets but because of the restrictive budget in which it is confined. It manages to give a lot of features. So it succeeds in that. $330 being its basic price is the biggest attraction of this tablet and I am sure it will do well in the market. I would rate 3 out of 5 for this tablet.
Reply With Quote
#2
Unread 4 Days Ago
RidD RidD is offline
Member

Join Date: Aug 2011
Posts: 1,269
Re: Acer ICONIA TAB A200
Looks good but disappointing to see such a bad display, that's really bad. Anyways the other features does looks good.
Reply With Quote
Reply

Firefox 10 Web Browser

2012-02-05T08:49:00.001-08:00

Mozilla had released its latest update for Firefox. Rightnow you can have Firefox 10 as the most recent web browser on your desktop. This update is released for all platforms. Firefox is one of the most widely used open-source web browser. It has already created a new era of web browser category which comes with tons of features and smooth performance. The updates surely keep adding more new fixes on the browser. From the last version to this there are many new additions which I had mentioned below. This new update emphasizes more support for Web Developers. That means now a Web Developer can use it as a Swiss knife for its project to create better end user results. You can now download Firefox 10. It is found that Mozilla has really taken a great leap to the 10th version of browser while users are still sticked under 3rd and 4th. The reason is easy to use interface and multi-tab browsing. New update tends to add more new tools on your web browser itself and also provides you to choose more add-ons on the same. The new version is quiet built for many supports for Web Development.

As it is found that the scope of internet keeps on expanding day to day, so it becomes necessary for the developers to provide the right technology which is accessible to all. Other than this it is also important to understand then needs of an end user and other stuff like security, privacy, etc. Now you might be wondering about, what an end user will be benefitted from the Web Development support on Firefox. It will not benefit directly but indirectly it is helpful for all. Under this the developers can run Web apps with the help of 3D graphic support. That means this version is designed for browser based gaming and apps development. Developers can just directly test the app and release and on the same hand end users can test tons of games online. The best example can be Chrome Store. From here you can download many apps and games and enjoy the same under single browser. Adobe Air is another good example of this. Firefox might be entering to this with the new version.

Firefox has waited a long time to provide Rich Content support on its browser. But that has not made any impact on its popularity. The new upgrades promises to provide a much smoother services. Firefox 10 will offer a much better compatibility on the add-ons or extension you will be going to use on the browser. According to the developers, they finally managed to cope out with the problem of incompatibility with the latest additions to Firefox. This new version is characterized by an automatic update in the background with better management of extensions. Mozilla says the add-ons developed for Firefox 4 should work fine in Firefox 10. The problem of performance after adding extensions to the browser has been reduced which is a kind of complement to the functionality of Firefox. This issue is faced in many generations of the Mozilla. After adding add-on the browser performance sucks. But this time it being said that the story will be a bit different/ Developers simply do not have time or for some reason delayed modernization of its code-source.

And Mozilla takes a step towards those who distribute it under the brand expansion beyond online store Mozilla. Now 75% of add-ons that are not in the official repositories, but downloaded by users, Firefox will automatically mark the 10 and disable those that do not fit into the program code of the 10th version. As for companies, then they will become Firefox 10 first edition with advanced technical support (ESR). Other new features introduced in Firefox 10 include support full screen mode for web applications.
Reply With Quote
#2
Unread 4 Days Ago
Trog's Avatar
Trog Trog is offline
Member

Join Date: Apr 2008
Posts: 244
Re: Firefox 10 Web Browser
What is New?

Images :

1. Web Developer Tab

Web Console
Inspect
Scratchpad
Page Source
Error Console

2. Web Developer Tool

3. Inspect Element Tool

4. Scratch Pad

Reply With Quote
#3
Unread 4 Days Ago
Trog's Avatar
Trog Trog is offline
Member

Join Date: Apr 2008
Posts: 244
Re: Firefox 10 Web Browser
Here is a short list of new things in the browser. I had tried to explain them in the simplest way I can. The list is not just finished. There are more add-ons that are still to be mentioned.

Full Screen API: This is the first feature listed on the web browser. This feature allows the developers to work on web apps on full screens support. This work mostly with html content on the browser. Allowing the developers to work more smoothly on app development. This is best for work with gaming or interactive apps which are needed to tested now and then before it reaches the end user.
Page Inspector: I had already mentioned about Page Inspector. What it does. It just makes an easier for a developer to learn about the website elements. that can be the design, font or colors. The developer can just verify that the web elements are loaded fine and are easy to navigate.
Style Inspector: As the name says it helps to see the CSS properties. The developer can carry out various experiments under this.

As mentioned already Mozilla Firefox 10 has added new, integrated development tools. This new tools are best for developers to design and test rich media applications. As today the web is more moving towards providing a better interface with flashy looks. It is found that flash content is one of the major elements used in sites and it does not matter what kind of operation the site carries. What matters is the proper functionality. The development tools in the web browser come with Page and Style Inspector and the scratchpad. So what is Page and Style Inspector? As you know that a website interface or look is a kind of important stuff. Because if a user found that your site is not made properly or looks dull, they might not visit back.

In Firefox 10, the Page Inspector can design styles, fonts, colors and positions of elements of a site. It is also possible to see the HTML and CSS rules applied by the browser for a particular item. So here the page inspector tells you about the onsite code of existing or chosen element. This is same like Chrome has inspected element or Opera with Dragon fly support. Firefox is being late in this process. But now with the help of Page Inspector it is possible to highlight HTML Elements. This is not really a big advantage for the end users but sure for developers who love Firefox. If the Inspector is active, the respective elements of a Web site highlights and day, classes and id of the element is displayed. At the foot of the page displays the Inspector a tool bar, in which developers can work on the basis of so-called Bread Crumbs from the HTML structure. Another support is the Style view. When you activate the Style view you can view the CSS of site. So that you can figure out property-based viewing.

The format which you will see will be able to give a layout the web css stylesheet which will be quiet similar to the current one. The property view displays the other hand, the real CSS properties of an element, for example, the final font size. The style view can alternatively be activated with Ctrl-S. The last thing in this Scratchpad. This pad if just a kind of code editor which will help you to modify the exist code with JavaScript modification.

Conclusion:

Adding just a development toolbar is not the only motive for Firefox. The new upgrades always tends you to have better support on surfing. Here Firefox has offered various features because of which it is quiet popular. It is recommended to have a try for the same. The current version can be upgraded directly to Firefox 10. This is not the final version. Still downloaded under the name of Beta we can hope of better upgrades in the coming future. This time Firefox has targeted the developer community. This browser has become now handier for all those who want to work and test the web properties on a single time. But will this put an impact on the browser. It is not yet tested to far by any. The browser offers to test the elements with 3D hardware acceleration. So that means this time Firefox might consume your hardware resources also for better output. But surely this is going to put more strain on the performance. The desktop version along with mobile edition is equipped with better functionality and to deliver every element on your screen.

Firefox 10 is already loaded with all those features which are already present in the earlier versions of this web browser.

Upgrading from Mac OS X Lion GM version to Final version

2012-02-05T08:44:00.003-08:00

Guys I have created this thread to inform you all something about the upgrading of GM version to the final version of the Mac OS X lion version. Which i think would be the ideal option for you in this case, so that’s what I am saying here. Let’s hope that this guide will be of immense help for you.
Now before going ahead with the idea let me mention you some important points that you need to take care while going through the guide.

a) As such the guide is a pretty simple one and hence do follow the instructions carefully.

b) Make sure that you download the Lion app from appstore.

c) Boot while you are in the installation media and then choose the Hard disk where GM version is installed.

d) Now install it and then reboot it later.

e) Make sure you are having the following list of items they are very much necessary while you are going ahead with the operations, so hope that does help you to some extent.

i) Working OSx installation file.
ii) Extra Lion DP4 pkg file
iii) MBR patch by Nawcom
iv) Auto Patcher from DSDT will do for sure.
v) Chameleon 2 RC5 for running the package file will surely help you to some extent.
vi) USB drive with minimum 8GB capacity.
vii) Do try getting any extra installation packages if you have some.
viii) Last but not the least OSX Lion.app that I have mentioned above.

Ok guys I hope you all are having the minimum requirements that I have mentioned here, now let me continue with the guide, so guys let’s get started with the installation process and lets hope that you get lucky in your first start.

1) Select the OSX Lion.app and right click on it. Then select show all contents, now you will get to see any of the three options that I have specified here Contents or Shared Support or InstallESD.dmg file. So if you are getting any three of them then select it and open it up.

2) right click on it and then select the disk image mounter option. Do select that option and then after it is mounted type the following command in the terminal
‘open /Volumes/Mac\ OS\ X\ Install\ ESD/BaseSystem.dmg’

3) now what you need to do is that connect the USB and then format it to the OS X Extended. Make sure that Basesystem is restored in the flash drive that will be of good help for you. so do try working on that.

4) Now with the Basesystem you need to open it up and navigate to the packages folder and then delete it accordingly. Also you need to replace it with the Contents or Shared Support or InstallESD.dmg file that you had mounted earlier.

5) Now extract the MBR patch by Nawcom and then install it accordingly and also replace one more thing make sure you replace the location that I am giving you here ‘/System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/OSInstall’ with the ‘/Installation/Packages/OSInstall.mpkg’.

6) Now its time to install the Extra Lion pkg and Chameleon 2 RC5.

7) After having done with the installation all you need to do is to reboot the system and then boot in LION and see if everything is working fine or not.

Now this is a separate section that I have created to work on post installation of the mac osx lion. Here are some steps

1) Now you need to install everything that is left out in the requirements that I have given you. first install the Install Extra Installation pkg file.

2) Now after having run that then install the Chameleon 2 RC5.

3) The patcher that I have motioned you in the above post i.e. DSDT run it and then copy the aml generated file and that too in the desktop.

4) Having done that reboot the system.
Reply With Quote
#2
Old 17-08-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: Upgrading from Mac OS X Lion GM version to Final version
Troubleshooting some common issues

Now this is a section that will target the common issues that have come up and hence I have developed a solution for the same.

1) Now if you are having some problem with the connection of the appstore then go to the terminal and type the following code ‘open /Extra’.

2) Some of the people have complained that they are having the PS2 keyboard and it is not being detected by the new operating system, what to do? So what I would say is that go to the terminal and type the following code ‘/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist’.

Now at the last I am able to get some snap shots of how the actual desktop looks like, so do have a look at the same and let me know what do you felt about the same. I am very much eager to know your response, on what do you all think about the new design.

Reply With Quote
Reply

Shadow of the Damned seems that has the mixture of three of the best characters in the world of video games and the game looks like you've always wanted to do, without fear of criticism and poor sales. Let it seems that George Romero, Spielberg and Enio Morricone came together to make a film that gave them the real victory, enter it, everything going through your head without thinking whether at home or not.The story has a certain resemblance to Dante, the hero must descend into the underworld in search of his beloved, unless hell has little to Dante found in their adventures. Therefore, the desperate search for Paula Garcia, among the dead, ghosts and other monsters of the subsoil. This is the precious help of a talking skull, which becomes more weapons and we can continue to improve to insert the gems found and collected. This partner will be very useful as a guide of the underworld and had a good season in him. Both he and our hero is transformed into a comedy duo of the most fun and most of us to laugh during the adventure. And that humor is the highlight of the game, beyond the sense of dread or fear that they try to give some time and seems more than premeditated by their creators to a Scary how to move the video game. Graphically the game is pretty mediocre at times, because this gives us even more to think about the game have created regardless of the criticism and the recipients are hardcore gamers and most passionate clubs that those who seek the years playing the latest generation graphics. The character is quite large, maybe sometimes too much, less visibility, and the scenarios are varied and full of cloves and bloody items. Nothing in it is higher than the average of the current games, no fire, no liquids, no explosions, no lights, but do not seek it, because its gameplay is more than enough reason to give him a title shot. As for the game modes are concerned, Shadows of the Damned do rather short, although it has some originality. The game has no multiplayer or online or offline, much less cooperative. Only with the main story and a Johnsonpedia, similar to Wikipedia that we all know, we discover the specific nature of the behavior of the dark and demonic, demons and other dark aspects of these important lands. And here the same. The duration of the game is not finished, indeed, could fall short for the more experienced. 6 to 8 hours depending on how good we are, but we can assure you that will make you much less between the laughter and before the shooting. Their difficulty is not too high, even in hard mode will not be an ordeal for those who are accustomed to this kind of games for all the others, our recommendation will play as usual, without being too simple, we offer a handful of challenges. Gameplot : Quote: His name is Garcia Hotspur, hunter of demons, and his wrath will bring hell to its knees. From the creative genius of Suda 51 (No More Heroes) and Shinji Mikami (Resident Evil) comes an all-new psychologically twisted vision of hell unlike anything seen before. Shadows of the Damned combines visceral action with dark, grotesque horror to create a mind-shattering adventure that has to been seen to be believed. When evil demonic creatures kidnap Garcia’s girlfriend, it’s up to him to travel to the City of the Damned to get her back. Aided by a former demon with the ability to transform into an array of vicious weapons, Garcia will once again take on the mantel of “demon hunter” and rip apart the horrifying forces of the underworld to protect what he loves most. Players must harness the power of the light to fight the army of the dark in unique light versus darkness gameplay that will forever change the way gamers perceive puzzles, combat, and terror. Combining the punk rock style of Suda 51 with the legendary horror design of Shinji Mikami, Shadows of the Damned will take gamers on an in-your-face thrill ride through demon-torn towns, shadow infested forests, grimy sewers and more. Featuring the most twisted boss battles ever seen, warped visuals and intense visceral combat, Shadows of the Damned will challenge gamers to break through the ultimate head-trip to help Garcia rescue his tortured girlfriend from the clutches of a mysterious enemy. Brace yourself for one hell of a trip to the city of the damned.

2012-02-05T08:44:00.001-08:00

A corrupt registry is the usual headaches for most of the computer users. Registry is an important part of your Windows operating system, it is what we call the central space. It stores all data on your PC, then a small error can cause big problems.

Yesterday I was called to repair a friends PC, because his PC receives an error when he tries to start Windows XP. He thinks of reformatting the PC but has chosen to call me first to seek advice. Below is the error, he receives when loading Windows XP. Luckily I was able to rescue him from formatting his PC.

Here are the procedures that you can follow to be able to restore a corrupted registry, and usually start up again on Windows XP. The procedures below also applies to the following registry key errors.

Windows XP could not start because the following file is missing or corrupt: \ WINDOWS \ system32 \ config \ system

Windows XP could not start because the following file is missing or corrupt: \ WINDOWS \ system32 \ config \ software

Stop: c0000218 (Registry File Failure) The registry administrator can not load the hive (file): \ SystemRoot \ System32 \ Config \ SOFTWARE or its log or alternate

Reply With Quote
#2
Old 21-01-2009
Trog's Avatar
Trog Trog is offline
Member

Join Date: Apr 2008
Posts: 244
Re: How to fix "Windows XP could not start because the following file is missing or corrupt"
Start Recovery Console

To fix registry errors, you need Windows XP Recovery Console. You can start from a Windows XP CD or boot directly to the Recovery Console.

Follow these steps to boot into Windows XP Recovery Console

Put your Windows XP CD-ROM drive

Restart your computer, make sure that your BIOS is set to boot from CD

When you see the "Press any key to boot from CD ..." press the space bar or any key.

Wait until you see the "Welcome to Setup" screen, press R to start the Recovery Console

Choose the Windows installation that you want to load

Enter password and press Enter

You should now be at C: \ Windows> prompt

Repair Copy files via Recovery Console

If your Windows installation is on another drive you replace the drive letter in the procedure below.

At the Recovery Console command prompt, type the following lines and press ENTER after each line:

md tmp
copy c: \ Windows \ system32 \ config \ system c: \ windows \ tmp \ system.bak
copy c: \ Windows \ system32 \ config \ software c: \ windows \ tmp \ software.bak
copy c: \ Windows \ system32 \ config \ sam c: \ windows \ tmp \ sam.bak
copy c: \ Windows \ system32 \ config \ security c: \ windows \ tmp \ security.bak
copy c: \ Windows \ system32 \ config \ default c: \ windows \ tmp \ default.bak

delete the C: \ Windows \ system32 \ config \ system
delete the C: \ Windows \ system32 \ config \ software
delete the C: \ Windows \ system32 \ config \ Sam
delete the C: \ Windows \ system32 \ config \ security
delete the C: \ Windows \ system32 \ config \ default

copy c: \ windows \ repair \ system c: \ Windows \ system32 \ config \ system
copy c: \ windows \ repair \ software c: \ Windows \ system32 \ config \ software
copy c: \ windows \ repair \ Sam C: \ Windows \ system32 \ config \ Sam
copy c: \ windows \ repair \ security c: \ Windows \ system32 \ config \ security
copy c: \ windows \ repair \ default c: \ Windows \ system32 \ config \ default

Quit Recovery Console by typing "exit." When the computer restarts, press F8 and then select Safe Mode
Reply With Quote
#3
Old 21-01-2009
Trog's Avatar
Trog Trog is offline
Member

Join Date: Apr 2008
Posts: 244
Re: How to fix "Windows XP could not start because the following file is missing or corrupt"
Restart in Safe Mode and a Recent Snapshot Backup

Restart the computer in Safe Mode by pressing F8 during the initial bootup and select Safe Mode. Once in Safe Mode, make sure the files and folders are visible so you can access them. Follow these instructions to achieve this.

Open My Computer

Click the Tools menu and then click Folder Options.

Click the View tab.

Under Hidden files and folders, click to select Show hidden files and folders, and then click to clear the Hide protected operating system files (Recommended) check box.

Click Yes when the dialog box that confirms that you want to display these files appears.

In My Computer, double-click the drive where you installed Windows XP (usually drive C) to view a list of folders. Then double-click "System Volume Information" folder. This folder contains the system restore points stored on your computer. The folders are similar

_restore (EE42BEB8-700A-495F-8004-53D26C2E12C5)

You may receive an Access Denied error message when trying to access the System Volume Information folder.

C: \ System Volume Information is not available. Access is denied.

You received this error message because you are logged into folder that does not have permissions set on the folder. To correct this, please follow the instructions in Microsoft Knowledge Base article 309531 to access and continue.

Once you have access to snapshots, use the following instructions to copy one of the latest snapshots for Windows \ TMP folder, so you have access to it.

The System Volume Information folder, click View, then click Details to display the date of each snapshot folder.

Open a folder that was created at the current time, but rather before the problem began.

Open Snapshot subfolder

Check the following files and copy and paste them into C: \ Windows \ TMP folder
_REGISTRY_USER_.DEFAULT
_REGISTRY_MACHINE_SECURITY
_REGISTRY_MACHINE_SOFTWARE
_REGISTRY_MACHINE_SYSTEM
_REGISTRY_MACHINE_SAM

Rename the files that you just copied into the C: \ Windows \ TMP folder.
Rename _REGISTRY_USER_.DEFAULT to DEFAULT
Rename _REGISTRY_MACHINE_SECURITY for security
Rename _REGISTRY_MACHINE_SOFTWARE software
Rename _REGISTRY_MACHINE_SYSTEM for system
Rename _REGISTRY_MACHINE_SAM to SAM

When your done rename files, restart your computer again with the Recovery Console

Reply With Quote
#4
Old 21-01-2009
Trog's Avatar
Trog Trog is offline
Member

Join Date: Apr 2008
Posts: 244
Re: How to fix "Windows XP could not start because the following file is missing or corrupt"
Replace Repair files with a current backup of the Registry

In the Recovery Console again, type the following commands at the prompt to replace the files with a current backup. You must press ENTER after each command.

Part c: \ Windows \ system32 \ config \ Sam
Part C: \ Windows \ system32 \ config \ security
Part C: \ Windows \ system32 \ config \ software
Part C: \ Windows \ system32 \ config \ default
Part C: \ Windows \ system32 \ config \ system

Shadows of the Damned Walkthrough & Tips

2012-02-05T08:43:00.003-08:00

Shadow of the Damned seems that has the mixture of three of the best characters in the world of video games and the game looks like you've always wanted to do, without fear of criticism and poor sales. Let it seems that George Romero, Spielberg and Enio Morricone came together to make a film that gave them the real victory, enter it, everything going through your head without thinking whether at home or not.The story has a certain resemblance to Dante, the hero must descend into the underworld in search of his beloved, unless hell has little to Dante found in their adventures. Therefore, the desperate search for Paula Garcia, among the dead, ghosts and other monsters of the subsoil.

This is the precious help of a talking skull, which becomes more weapons and we can continue to improve to insert the gems found and collected. This partner will be very useful as a guide of the underworld and had a good season in him. Both he and our hero is transformed into a comedy duo of the most fun and most of us to laugh during the adventure. And that humor is the highlight of the game, beyond the sense of dread or fear that they try to give some time and seems more than premeditated by their creators to a Scary how to move the video game.

Graphically the game is pretty mediocre at times, because this gives us even more to think about the game have created regardless of the criticism and the recipients are hardcore gamers and most passionate clubs that those who seek the years playing the latest generation graphics. The character is quite large, maybe sometimes too much, less visibility, and the scenarios are varied and full of cloves and bloody items. Nothing in it is higher than the average of the current games, no fire, no liquids, no explosions, no lights, but do not seek it, because its gameplay is more than enough reason to give him a title shot.

As for the game modes are concerned, Shadows of the Damned do rather short, although it has some originality. The game has no multiplayer or online or offline, much less cooperative. Only with the main story and a Johnsonpedia, similar to Wikipedia that we all know, we discover the specific nature of the behavior of the dark and demonic, demons and other dark aspects of these important lands. And here the same. The duration of the game is not finished, indeed, could fall short for the more experienced. 6 to 8 hours depending on how good we are, but we can assure you that will make you much less between the laughter and before the shooting. Their difficulty is not too high, even in hard mode will not be an ordeal for those who are accustomed to this kind of games for all the others, our recommendation will play as usual, without being too simple, we offer a handful of challenges.

Gameplot :
Quote:
His name is Garcia Hotspur, hunter of demons, and his wrath will bring hell to its knees.

From the creative genius of Suda 51 (No More Heroes) and Shinji Mikami (Resident Evil) comes an all-new psychologically twisted vision of hell unlike anything seen before. Shadows of the Damned combines visceral action with dark, grotesque horror to create a mind-shattering adventure that has to been seen to be believed.

When evil demonic creatures kidnap Garcia’s girlfriend, it’s up to him to travel to the City of the Damned to get her back. Aided by a former demon with the ability to transform into an array of vicious weapons, Garcia will once again take on the mantel of “demon hunter” and rip apart the horrifying forces of the underworld to protect what he loves most.

Players must harness the power of the light to fight the army of the dark in unique light versus darkness gameplay that will forever change the way gamers perceive puzzles, combat, and terror.

Combining the punk rock style of Suda 51 with the legendary horror design of Shinji Mikami, Shadows of the Damned will take gamers on an in-your-face thrill ride through demon-torn towns, shadow infested forests, grimy sewers and more. Featuring the most twisted boss battles ever seen, warped visuals and intense visceral combat, Shadows of the Damned will challenge gamers to break through the ultimate head-trip to help Garcia rescue his tortured girlfriend from the clutches of a mysterious enemy.

Brace yourself for one hell of a trip to the city of the damned.

How to install Mac OS X 10.6 (Snow Leopard) on PC, Laptop & Dell XPS

2012-02-05T08:43:00.001-08:00

There is a way by which you can use Mac OS X 10.6 on your pc or laptop. Though there is always an issue of using this operating system with your regular system. The dedicated systems by Apple are much better is true. But somehow for the geeks modification generates more curiosity. The process is not 100% working, but to some extent it is successful if performed well. The procedure is also not much hefty. There are some hardware which will not respond, and as you are modifying your system un-officially. Lots of updates are needed here. The most important here, is to first figure out the hardware compatibility. Many tests are made on various systems, and due to lots of hardware variations there is no exact method available.

There are many to ready to use disc which need just proper boot and other is automated. I found some of the most helpful tutorials here which can help you to configure Mac OS X 10.6 on Desktops and Laptops. Have a look on the system configuration first before performing any step.

Reason behind why you cannot use Mac Operating System on Regular System:

There are many reasons for this which is related to both hardware and software. First and most appropriate is that Mac operating system is specially designed to run and work only Apple motherboards. This is not like Windows or Linux, where hardware and software are designed and manufactured by independent companies. All compatibility issues are resolved by a dedicated experienced team so that end user can work on plug and play basis. On Mac the entire scenario is different. Hardware and software are specially designed to make a Mac system which is not supported by any Third party sources.

Second it is quiet illegal when you are using a Mac based operating system on non-Apple systems. You might have noticed that even today, you will hardly found an Apple disc for non-Apple systems. They sell but too costly. Your operating system does not remain genuine when you run it on non-Apple system. And any updates received from Apple is enough strong to break your systems compatibility.

The third reason is that, on some Intel based computer it is possible to run Mac operating system. Dedicated community like Hacktintosh is group of people who try to do modification on Mac operating system and test them on various other systems. Every Mac operating system comes with an End User License Agreement. This prevents the operating system to work on other hardware. While this is not present in Windows or Linux.

Boot-132 Mac Disc:

Boot 132 is a kind of bootloader which is used to boot Mac operating system. This was lately provided by Apple for loading XNU kernel. It consists of 3 stages boot process. Those are boot0, boot1 and boot2.

Install Mac OS X 10.6 (Snow Leopard) on PC:

Remember that this is just for testing purpose. You cannot use this legally without having a purchased copy from Apple.

PC components are critical to or not install Mac OS X. Generally it is recommended to have Gigabyte motherboards, processors from Intel Core 2 and nVidia graphics cards.

System Configuration:

Motherboard INTEL DG33TL / Asus P5Q (Intel P45 / ICH10R Chipset)
Intel Q8800 2.4 GHz CPU / Intel Core2 Quad Core Q6600
Nvidia GF 8800 GT 512MB / NVIDIA GeForce 8600 GT
Kext folder which will be needed at the end of setup
A system running on Mac Operating system (Required to build HDD)
Proper bios and firmware updates.

BIOS/Firmware Update:

One of the most important when installing OS X on a non-Apple system you have to run a fresh bios updates. There are specially modified BIOS available on internet for running Mac operating system. You can download and run. Remember that wrong flashing of BIOS can cause permanent death of your motherboard. So this on your own risk. It is better if you have a Gigabyte board. In the case of the Asus P5Q need to upgrade the firmware of the BIOS ROM (Asus P5Q Juzzi BIOS). Download this and copy the files on an usb drive. Boot the PC with the flash drive connected and update the BIOS. The process to update bios is simple. Thanks to ASUS EZ Flash 2 tool. Under Tools you can choose the drive location to update your bios.

Modifying Bios Settings:

I prefer to go with Asus P5Q board. I had listed some settings which you will need to modify to make Snow Leopard boot properly.

From the Main BIOS screen set SATA as AHCI
No go in Advance > Onboard Devices Configuration > and disable Serial Port1 Address & Marvel IDE. Put No for PCIPnP.
Go to Power > set no to Repost Video on S3 Resume. Set AHCI to APM Configuration. S3 only for Suspend Mode.
Disable Control Drive Xpert and Express Gate under tools. Some of your motherboards have settings to enable boot form OS X/other OS. Check for same and enable.

Reply With Quote
#2
Old 22-08-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
re: How to install Mac OS X 10.6 (Snow Leopard) on PC, Laptop & Dell XPS
Snow Leopard Installation:

Using Empire EFI:

Once you had configured the bootloader your more than half works in done. You can use EmpireEFI boot disc to install this. Boot from Empire EFI and let him recognize the Snow Leopard disc. Then press F5 and hit entire to run installation. After sometime you can see a text mode setup of Snow Leopard.

1: Choose Language.

2: You have a process here to create a partition. This is a very important part. Because Mac operating system do not really work on NTFS or FAT drivers. They need a different partition scheme. At the top you can see some menus. Choose Disk Utility. When you click on Disc utility you get a screen where the hard drive is listed on the left side. Choose Volume Scheme > 1 partition > Type a name > Format > Mac OS Extended (Journaled). After select Options > GUID Partition Table > Apply. Once ever tying is done fine, you can see the Continue button to run the installation.

3: Choose Mac OS X disc by clicking on it. When you clicked the operating system installation begins. You can see a progress bar.

4: Now after that when you boot with EFI you can see two options in that. First is Empire EFI and second is Snow Leopard. Choose Snow Leopard. You can now see the Welcome video. Proceed to choose the language > keyboard > and a process to create your Apple ID. This all is needed to complete the process.

5: Now you can use an automated tool myHack Installer, which can help you to install kext bootloader. But a manual setup of this is much better and successful.

6: The main work here is to install a bootloader so that your hard drive does not rely on EmpireEFI disk to boot every time. For that the best thing is to use Chameleon 2.0 RC3. The setup is easy here and after installation you can see the boot menu with a smiling chameleon. Right your Snow Leopard is installed on the partition /dev/disk0s2.

7: You have to first unzip the file Chameleon-2.0-RC3-r658-bin.tar.gz and placed in the folder i386 in a Terminal window. To install the boot0 on your MBR follow the below steps:
Code:

sudo fdisk -f boot0 -u -y /dev/rdisk0
Install boot1h in the boot sector of partition:
sudo dd if=boot1h of=/dev/rdisk0s2
Install boot in the root directory of the partition:
sudo cp boot /

8: The next step is to install all necessary kext for the team. For the components of the PC can use the compilation of kext that have previously downloaded. The easiest way to install is using Kext Helper. If you need to repair permissions of the application you can use Kext Utility.

9: To configure your graphic card you can use EFIStudio. For that you will have to Select Device and Display. Form the drop-down you can choose your graphics card. Like Nvidia GeForce 8600 GT - 512 MB in my case. Then click on Add Device and the new window that opens. On that click on write to com.apple.Boot.list, which will add information on your graphics card to the file /Library/Preferences/SystemConfiguration/com.apple.Boot.plist. Reboot your system and you can see the Chameleon bootloader.

Manual Setup:

Best way to use facebook chat : link| connect yahoo and facebook account :

2012-02-05T08:42:00.000-08:00

Hi, I have found this recently as we can make use of yahoo messenger at the same time to access the facebook chat as well. Now you don’t have to login through the page rather by means of yahoo messenger you can simply chat with your facebook friends as well.

And hence I am making this guide which will help you to link your Yahoo and Facebook accounts together.
Reply With Quote
#2
Old 22-08-2011
REDBULL REDBULL is offline
Member

Join Date: Nov 2009
Posts: 581
Steps to link Facebook Chat on Yahoo Messenger
Follow the mentioned steps :

Step1: Before beginning let me tell you that you must have to have yahoo account then only you can do this, thus if you don’t have any first make it from HERE.

Step2: To chat with your Facebook friends you will first have to link your Yahoo and Facebook accounts. You can do that from within Messenger by completing the "Link to Facebook" flow. This flow can be initiated from two places. If you have created a new ID so whenever you login for the first time you’ll get the screen as mentioned in the figure below:

Click the Link to Facebook banner within the main window.

Step3: if you already have an account so you can do the same thing by opening Messenger > Preferences > Connected Networks tab and then click the Add Facebook button. Refer the below Image:

And then select another option mentioned in the figure below :

Step4- Once you have linked your Yahoo and Facebook accounts you will be able use the following procedure to sign in to, or out of, Facebook Chat:

Click the Messenger menu, or right-click the Facebook Friends contact group.

Select Sign in to Facebook Chat or Sign out of Facebook Chat

.

When you are signed in to Facebook chat, just double click a Facebook friend's name to start a conversation .
Reply With Quote
#3
Old 23-08-2011
jonalexa

Posts: n/a
Re: Best way to use facebook chat : link| connect yahoo and facebook account :
Thanks for great info lol!

I will follow those steps today.

Samsung LED Monitors Buying Guide

2012-02-05T08:41:00.001-08:00

There are lots of points which come in mind when you are planning to upgrade new monitor for your system. It can be a matter of choice for a user to go for an upgrade or to choose an appropriate monitor at the time of purchase. Today it becomes a bit difficult to choose the best one among a large a variety of monitors. There are tons of products with many ranges that differ in size, price, resolution, etc. It is better recommended that you must take a help of buying guide to get more information on your purchase. The first thing which is needed to check is the aspect Ratio. The resolution of LCD displays for PC widescreen used an aspect ratio of 16:10, while LCD TVs / plasma, a ratio of 16:9.

On the PC, for example, we use resolutions like 1280 × 800, 1440 × 900, 1650 x 1080, meaning the number of pixels that had horizontal x vertical. In some new monitors, has adopted a resolution known as "HD" or High Definition, which comes in two flavors of pixels: 1280 × 1920 × 720 and 1080. This has had an interesting impact on monitors "intermediate." Previously, the monitors 20-22 "were limited to a resolution of 1680 × 1050. Today, it is common monitors with different size: 21.5 "- 23", which have higher density of pixels and are capable of displaying a resolution of 1920 x 1080, winning "space" in both wide and high. The other thing that matter is the monitor size.

The first thing that will draw attention is the size of the monitor. The good thing is, as mentioned at the beginning, there have been intervening in the market monitors 21.5 "and 23" are definitely better options for 20 "or 22" we had just a year ago. If you need something bigger monitors are 25 ", still with a 16:10 aspect ratio, which are capable of displaying a resolution of 1920 x 1200. There are also 28” showing the same resolution. Among the small monitors, we have 17 "18.5" and 19".

The next point I have to take into account is the resolution. That is, the number of pixels we'll see. That is, the higher the resolution, more pixels have to work. In a TV, the difference in 1280 vs. 1920 x 1080 x 720 may not mean much (at least for most), because the movie will earn more detail (which is distinguishable in larger TVs), but the change is not dramatic as going from a standard definition TV, vs. one in high definition. In computer monitors, however, change is much more important. Look at the difference of a resolution of 1920 x 1080 against an 800 × 600 (the lowest possible, at least on my monitor). The resolution therefore does not give a larger work area. With the resolution of 1920 x 1080 (the first image of the two) could have several programs open, all without necessarily are hidden from each other.

What to look in a monitor:

I believe to go for a higher resolution and widescreen gameplay. The best is to go for 21.5 "or 23" or higher. I had mentioned. They're the best balance between size have / resolution, it gives us the ability to watch movies and all kinds of content that is in "Full HD", or 1920 × 1080. In addition, the price difference between a 21.5 "and one of 20" is almost minimal, usually. And when we consider a 19 "to a 21.5", we have a monitor that does not occupy much space, but give us a much higher resolution.

So if you are looking for a monitor with a perfect balance between size / resolution / price can not go wrong with a 21.5 "that has 1920 × 1080 resolution. If you are looking for something bigger, or are uncomfortable that resolution on a monitor 21.5 "is always the option of 23", with which we see all those glorious pixels at a greater distance. These are the typical specs to read, but do not know what they really mean. So better go for some manual and other view help to get in detail information on the same. The important thing here is, therefore, look for a monitor that has the highest Contrast Ratio (i.e. the number on the left, for example, 10,000:1), but not blindly guided by this information
Reply With Quote
#2
Old 23-08-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Samsung LED Monitors Buying Guide
Why to go for LED Monitors?

LED monitors do get more benefit from a true Contrast Ratio. The reason to choose them is low power consumption and high contrast ration. The output of a blu ray disc or an high definition video is just awesome on LED. In this can get much better contrast ratios than LCD standards and you can notice that on your own. The size and weight is just as per the need. Above all you get an awesome set of colors and better brightness. Unlike Contrast Ratio, Response Time is a point that matters. It is found in the specification when we see a number like: 6ms or 5ms or 2ms.

There is an effect called ghosting. What it means is you can see fast moving objects with a halo behind them. This is not found in LEDs but are common in led monitors. When you see a fast moving objects it presents a shadow behind which is due to lack of hd output. Most LCDs on the market have a 5ms response time at least, which is more than enough to virtually eliminate this problem. Go for a high contrast ratio and low response time. This will surely fit your need. Also LED monitors comes with connectivity support. They provide you direct connection with pcs and other devices.

Samsung LED Monitors:

Samsung is a market leader in monitors and some the best product starts from here. There are number of HD LED monitors available for the Indian market. The price is listed next to the brand with features and specifications you need to know.

Samsung LED S27A550H - Price MRP Rs. 20,500/-

Highlighted Features :

Mega Dynamic Contrast : 5,000,000:1 contrast ratio, crystal clear picture quality.
Energy Saver (Smart Motion Technology) : Motion sensors which automatically detects movement within a specified area in front of the screen. When you move away from the screen, it become dim automatically.
Gentle on Eyes : Samsung’s Eco light sensor allows adjusting light settings as per your environment. Eco light sensor creates a brilliant visual display while also minimizing your energy consumption
Brightness Control : Configure your monitor on different brightness control scheme and save energy.
Different Viewing Angles : There viewing angles – Diagonal/Bottom/Standing. Watch from anywhere in same output.

Samsung LED S19A300N – Price MRP Rs. 6,900/-

Highlighted Features :

Mega Dynamic Contrast : 5,000,000:1 contrast ratio, crystal clear picture quality.
Gentle on Eyes : Samsung’s Eco light sensor allows adjusting light settings as per your environment. Eco light sensor creates a brilliant visual display while also minimizing your energy consumption
Brightness Control : Configure your monitor on different brightness control scheme and save energy.
Different Viewing Angles : There viewing angles – Diagonal/Bottom/Standing. Watch from anywhere in same output.

Samsung LED S20A300N – Price MRP Rs. 7,200/-

Highlighted Features :

Mega Dynamic Contrast : 5,000,000:1 contrast ratio, crystal clear picture quality.
Gentle on Eyes : Samsung’s Eco light sensor allows adjusting light settings as per your environment. Eco light sensor creates a brilliant visual display while also minimizing your energy consumption
Brightness Control : Configure your monitor on different brightness control scheme and save energy.
Different Viewing Angles : There viewing angles – Diagonal/Bottom/Standing. Watch from anywhere in same output.

Samsung LED S22A300B – Price MRP Rs. 9,400/-

Highlighted Features :

Mega Dynamic Contrast : 5,000,000:1 contrast ratio, crystal clear picture quality.
Gentle on Eyes : Samsung’s Eco light sensor allows adjusting light settings as per your environment. Eco light sensor creates a brilliant visual display while also minimizing your energy consumption
Brightness Control : Configure your monitor on different brightness control scheme and save energy.
Different Viewing Angles : There viewing angles – Diagonal/Bottom/Standing. Watch from anywhere in same output.

Samsung LED S23A300B – Price MRP Rs. 11,000/-

Highlighted Features :

Mega Dynamic Contrast : 5,000,000:1 contrast ratio, crystal clear picture quality.
Gentle on Eyes : Samsung’s Eco light sensor allows adjusting light settings as per your environment. Eco light sensor creates a brilliant visual display while also minimizing your energy consumption
Brightness Control : Configure your monitor on different brightness control scheme and save energy.
Different Viewing Angles : There viewing angles – Diagonal/Bottom/Standing. Watch from anywhere in same output.

Samsung LED S24A300B – Price MRP Rs. 16,000/-

How to Fix boot time difference between Windows and osx86 in a Dualboot setup

2012-02-05T08:40:00.003-08:00

The sequence of events that occur between the time you turn on your computer and the time it gets ready to accept commands called the process of starting. It is really tempting to have operating system like OSX in your own personal computer. Thanks to osx86 designed for non apple based system. To run OSX on your system you will need to patch the system first. You have to do that by a patched installation DVD. There are various projects you can found on internet about the mac operating system you can run on your hard drive. All you need to check the perfect system compatibility or else the operating system will crash. Check for the hardware compatibility list to run Mac on non-apple systems.

There are certain basic terms that you need to learn and understand to work with the boot process. This will not only help you to fix the boot time, but also help you to manage the other boot process.

Some Hardware support to fix boot time incase of other problems :
One of the most important components in a computer' is the RAM. It is an temporary memory that cannot any information when the computer is turned off. This is the

reason for which a system cannot rely on RAM to remember the basic features of how to communicate with other hardware. So for the boot process is designed. In general,

the boot process follows the following steps :

Turning on the system. Here when you press the button on the case, the power is on.
The microprocessor begins executing instructions stored in ROM
Self Test on or power-on self- test. In ths stage the computer performs a crucial diagnostic system and each component of the computer
Loading the OS. The operating system files are copied from the hard disk into RAM.
Check the system configuration. The microprocessor reads the data from the CMOS setup and run any routine specified for use.
Ready to accept data and commands.

Location to add plists scripts :

To fix the boot time preferences you will need to provide an appropriate location to load your plists file. Plists files are xml script which loads the preferences of services to load on the startup. One a Mac based system there are three directories that are available where you can usefully put your plists.

If these folders do not exist to you, you can create them yourself also :
/ Library / LaunchDaemons - In this folder you put your plist, if you want to create a user-independent daemon.
/ Library / LaunchAgents - In this folder you put your plist, if you want to create an agent that is active for all registered users.
~ / Library / LaunchAgents - In this folder you put your plist, if you want to create an agent that is active only for a specific user.

You can find a whole series of launchd.plists in the folder / System / Library / LaunchDaemons. Apple recommends that folder only for native use plists. But if you look at a few examples, you should definitely take a look into it since.
Reply With Quote
#2
Old 27-08-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Fix boot time difference between Windows and osx86 in a Dualboot setup
Loading and testing your plist files :

To properly execute the plists file on your system you must first check that they are properly registered by launchd. Or else they will not be loaded. You could log out and back or to make a new start. The best thing to make this work by using the launchctl command. For example you have an script 2.plist file located in ~ / Library / LaunchAgents. And you want to load the file then you have to enter the following command into Terminal:

Code:

launchctl load ~ / Library / LaunchAgents / script 2.plist

And if you plan to turn this feature off then the command is below :

Code:

launchctl unload ~ / Library / LaunchAgents / script 2.plist

And the key to "Disabled" to remove:

Code:

launchctl load-w ~ / Library / LaunchAgents / script 2.plist

If you want to see which are loaded plists, type:

Code:

launchctl list

The boot time difference on Multiboot setup :

Many times you notice the time difference in a dual boot system is higher compare to regular. Especially when you are working two entirely different operating system which are based on different hardware architecture. For example using osx86. Many users face issue of getting Windows boot right after osx86 setup. There are certain fixes that can help you here to fix this problem. The setup and installation is easy with some updates you will need to download. The changes will lead to modification in Windows registry file. So have a backup of the same. Some entries located in Windows registry are quiet responsible for the boot time difference.

There is an reason behind this why does this happens. The common explanation is due to the different way of taking BIOS time is different in both operating system. In Windows the BIOS time that is your clock time is considered as the local bios time of your system. Sometime failed cmos lets to wrong time in your system. The scenarios for Mac is different. In this the UTC is which is called as Universal time is taken instead of the BIOS time. This results in boot time variation. This thing is needed to be fix to get an appropriate boot time. There are some bios udpates and patches for Mac DVD's which do the work.
Reply With Quote

Mortal Kombat PS3 & Xbox 360 Walkthrough

2012-02-05T08:40:00.001-08:00

Over time, it is not uncommon for a series of video games and eventually disperse away gradually from its basic principles. Mortal Kombat is no exception to this rule and the last episode came out in 2008 has puzzled many fans. Far from being a bad fighting game, Mortal Kombat vs. DC Universe did, it must be said, much more to do with the title that had unleashed the passions of arcade machines in 1992. Characters from two very different worlds, fighting in 3D, gameplay sequences contextual Fatalities worthy of Care Bears ... Fans of the first episodes have had trouble to join and we understand. They are happy now! Not only developers NetherRealm Studios have finally decided to return to the roots of the series but they also managed to sublimate all its original qualities to offer us one of the best fighting games on the market HD.

It has often been criticized for different Mortal Kombat gameplay rigidity of their simplistic and outdated. Yet after a few minutes of play only, it is clear that the clashes are much more fluid and dynamic than before. The shots are linked together more easily, the animations are less fixed and the pace of play is very strong even if not yet at a Street Fighter or Soulcalibur IV. HD requires, the staging is truly daunting. It knocks all over the place, the fighters well modeled screaming their rage, the blood spurts across the screen, visual effects accompany the best results ... At the show, it really is served! Nevertheless, in order to really enjoy it, it is better known on the fingertips of thirty characters available in this episode. It will thus learn to manage our three levels of power gauge of our fighting while keeping an eye on that of our opponent to place suitably special moves, counters and X-Ray attacks. It will know how to change character conveniently, block when necessary or use various fighting positions. Finally, fans of the first hour will be familiar with the new control system is now assigning a button to each member. That's probably why the training mode has been treated but other modes are not far behind.

In addition to the classic arcade fighting-against-one or a two-against-two, and a lot of games onlines categorized Mortal Kombat includes such a remarkable story mode and a truly original Tower of challenges. Story Mode, first of all, is not limited to a simple succession of cut-scenes more or less cheap as is regularly the case in similar games. Here, the player will have to deal with a true interactive movie interspersed with many battles. Long deliberately kitsch dialogues reveal to us the story while also very cinematic caricatures are responsible for us to impress. To strengthen the feeling of immersion of the players, the developers have had the excellent idea of integrating the various clashes directly in these scenes. They take place under very variable and the character with which we must fight changes regularly. Unless you are completely allergic to the world of Mortal Kombat or being unable to appreciate the second level of a script that never takes itself seriously, it will in the story mode for hours of happiness.

Walkthrough

Warrior Class in Mortal Combat :

Sub-Zero : An assassin of the Lin Kuei clan, Kuai Liang commands the power of ice and cold. Unlike other members of his clan, he and his older brother, Bi-Han, were abducted as children by the Lin Kuei and trained in the techniques of assassination throughout their lives. Though his codename is Tundra, he has now assumed the mantle of Sub-Zero to honor his brother after Bi-Han's mysterious death. Sub-Zero tirelessly hunts the one who killed his brother.

Scorpion : Hanzo Hasashi was once a member of the Japanese Shirai Ryu ninja clan. Given the name Scorpion for his blindingly fast and deadly fighting skill, his life was blessed with glorious kombat in the name of his Grand Master. But when he, his family and his clan were brutally exterminated by Sub-Zero and the Lin Kuei, Scorpion's existence became eternal torment. Resurrected by the malevolent necromancer Quan Chi, he entered the Mortal Kombat tournament to slay Sub-Zero and avenge the murders of his kin.

Mileena : Shang Tsung has created many abominable creatures in his Flesh Pits, but none so twisted as Mileena. A fusion of Edenian flesh and Tarkatan blood, Mileena is both beauty and beast. This dichotomy has made her mind unstable; she is prone to fits of madness and savagery. Though she has the appearance of a mature woman, she is more child than adult--a blank slate conformed to Shao Kahn's will. Devoid of conscience or remorse, Mileena will butcher anyone to appease her beloved father.

Liu Xang : Orphaned at a very young age, Liu Kang was raised by Shaolin monks, who taught him the way of the spiritual warrior. They soon recognized his potential as a contender for the Mortal Kombat tournament and rigorously trained him for this task. Raiden, too, understood that Liu Kang was Earthrealm's best hope for freedom and introduced him to Master Bo' Rai Cho to further his development. Once fully trained, Liu Kang bested all challengers and earned the high honor of representing the Shaolin in the Mortal Kombat tournament. He and Raiden then embarked on their fateful journey to Shang Tsung's island to compete in this pivotal kontest.

Shang Tsung : A treacherous sorcerer who consumes the souls of his victims, Shang Tsung has played host to the last nine Mortal Kombat tournaments in Earthrealm, stacking the odds in favor of his master. Originally from Earthrealm, Shang Tsung's magical abilities led him to discover the realm of Outworld. There he fell in league with its ruler, Shao Kahn, and pledged his life to him in return for enhanced power. He is now bound to the emperor by powerful dark magic. For centuries he has submissively done Shao Kahn's bidding. Should he fail in his mission to secure Earthrealm, he will suffer the emperor's wrath.

Raiden : Raiden is the God of Thunder and Protector of Earthrealm. Ageless and wise beyond measure, he leads Earthrealm's mortals in the endless battle against the forces of darkness. When Shao Kahn, Emperor of Outworld, threatened to merge his realm with Earthrealm, an overwhelmed Raiden implored the Elder Gods to give Earthrealm a fighting chance. Thus the Mortal Kombat tournament was created. For millennia Shao Kahn has been kept at bay, but nine consecutive losses to Goro have eroded hope that Earthrealm can be saved. Determined to prevent Armageddon, Raiden tirelessly quests to find a champion worthy of Mortal Kombat.
Reply With Quote
#2
Old 28-08-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
Re: Mortal Kombat PS3 & Xbox 360 Walkthrough
Special Attacks

Each character of the game's array of special attacks in addition to basic attacks he has. There are four types of attack: special attacks, special attacks boosted the X-Ray Furies attacks and fatalities. Special Attacks Special Attacks are carried out using combinations of the joystick and buttons. To perform a special attack, you must have a bar filled with your power gauge. Attacks Special Attacks Special boosted boosted use exactly the same combinations as special attacks, the only difference being that you must press the / at the end of the combination to trigger the Boost mode. Boosted special attacks require a bar filled with your power gauge.

The Furies the Furies X-Ray X-Ray requires that you have the 3 bars filled with your power gauge. Each character has a rage and it's only the same combination for all. The Fatalities Each character has at least two fatalities. These fatalities are attacks that are subject to the conditions of distance: Distance Leech You must stick to your opponent. No space to separate. Distance Scan You must keep between you and your opponent a distance such that your opponent is at the door of your scan. Distance Jumping You must maintain a distance such that at least one breaks between you and your opponent. The best trick to keep you away from your opponent to come to a paste and then jump back or two and then keep that distance. Full Screen Remote You must be completely the opposite corner of your opponent, on the other side of the screen, against the edge.

Combo Controls :

Afterburn : REAR + FP
Gut Crusher : REAR + BP
Charging Elbow : BEFORE + BP
Toe Kick : REAR + FK
Rising Knee : BEFORE + BK

Kombo Attacks :

Artificial Intelligence : FP, FP, FP + REAR
System Overload : FP, BP, FP + REAR
Hard Crash : FP, BP, BP
Malfunction : BEFORE + BP + FP REAR
Fusion Force : FP, BP, BK
Access Denied : FP, FK
Demolition : BP, FP, BK
Power Drive : REAR + BP, FP
Run Down : REAR + FK, BK
User Error : BEFORE + BK, FK
Fatal Error : BEFORE + BK, BK

Special Attacks

Flame Burner : Rear, front, BP
Teleport Uppercut : DOWN, FORWARD, BK
Straight Missile : Back, forward, FP
Up Missile (top) : DOWN, BACK, FK
Up Missile (back) : DOWN, BACK, FORWARD, FK
Up Missile (opposite) : BAS, front, rear, FK

Special attacks boosted

Flame Thrower : Rear, front, BP + R2/RT
Metal Uppercut : DOWN, FORWARD, BK + R2/RT
Double Missile : Back, forward, FP + R2/RT
Homing Missile : DOWN, BACK, FK + R2/RT

Fury X-Ray
Massive Missile : L2/LT + R2/RT

Fatalities

Robo-Sek : FORWARD, DOWN, BACK, FORWARD, FK (DF)
The Scarecrow : DOWN, DOWN, FORWARD, BACK, FP (DF)
Course : DOWN, FORWARD, DOWN, R2/RT
Bability : BACK, DOWN, DOWN, DOWN, BK (SD)

Team Attacks

Intersect : DOWN, FORWARD, BK Tag
Partition : DOWN, FORWARD, BK + R2/RT, Tag

How to transfer from Facebook to Google+

2012-02-05T08:39:00.002-08:00

How to transfer from Facebook to Google+ ?

HI, I posting this guide for the people who want to make use of google+ but they have already spent a lot of vital time and information in Facebook and it’s not easy moving to a new social network. Moving social networks isn’t the simplest thing to do, but fortunately there are a many tools that we can make us of to migrate pictures, videos, and friends.

Hence here are a few quick tips on shifting your information from Facebook account to your new Google+ account.
Reply With Quote
#2
Old 28-08-2011
spookshow\'s Avatar spookshow

Posts: n/a
Export Facebook Information to google account:
Export Facebook Information to google account:

First of all you have to start with downloading all of your Facebook information. And for doing that you need to follow some steps:

1- log into your Facebook account and go to “account settings” appear on upper right corner, refer the Image below.

2- As soon as you clicked on the account settings page comes in to view, and from that you have to select the link as mentioned below in the figure, which will be appeared at the bottom of the list.

3- Since you click that link a page would be visible, in which you have to clicked on the archive button, and as you do this it will prompt you for the password, hence enter it and you'll be able to download those information from your subscribed mail account.

4- Once you receive the email on your subscribed account, click the link to download a zip of all of your files.

5- Now verify the information by extracting the files and open the index.html file.
Reply With Quote
#3
Old 28-08-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Associate facebook profile to google+ account:
Associate facebook profile to google+ account:

1 You need to first of all log in to your google account and click on the settings that will be appeared on the upper right corner of your screen.

2 As the screen appears you have to click on “connected accounts” link at the left corner you can refer the image below.

3 Click on “connect an account” button and enter the profile name that you have putted on your facebook account.
refer the above IMAGE.

4 And then click on “add” button.

5 Now click on the home page and you can see the link on right side of the page.
Reply With Quote
#4
Old 28-08-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Import and share Pictures from facebook to google+ account:
Import and share Pictures from facebook to google+ account:

Google+ uses Picasa web albums to share pictures thus you need to have Picasa installed in your PC in order to share picture.

As you completed the installation, open Picasa and add the Facebook photos folder you just downloaded to picasa.

Set Picasa to examine the folders one time, and then let it do the import.

Once the pictures have finished importing into Picasa, find the albums and select Sync to Web on the right.

A pop-up window will open and ask you to sign in to web albums. Log in with your Google+ account.

I’d recommend setting your new album visibility to private by default.

Go back to Picasa and hit it off sync button; your photos will be uploaded in the background.

Now for sharing the pictures log into Google+ and click on photos in the top banner and Navigate to your albums on the left.

Open the album you just uploaded and click share album at the top.

Reply With Quote
#5
Old 28-08-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Import and share your Videos on google+ account:
Import and share your Videos on google+ account:

Importing videos is a lot less preset than pictures. To import your Facebook videos browse to your Facebook export you downloaded earlier and there will be a videos folder. And for accessing them follow the steps.

Log into your Google+ account and click on your profile >> videos.

How to Play SNES Games on IOS running device (IPAD) by Wiimote

2012-02-05T08:39:00.000-08:00

though IPAD don’t have lack of game in it but still I have found the people wanting to play the Wii games on their IOS running devices. But some of them still don’t knows as this is possible with the device.

Hence I am making the guide in order to make you enable to play all SNES Games on IOS running device.
Reply With Quote
#2
Old 29-08-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Play SNES Games on IOS running device (IPAD) by Wiimote
SOFTWARE AND HARDWARE REQUIREMENTS :

You must have to have iOS running jail broken device (for an example IPAD)

A synchronization cable for that iOS device.

A Wiimote (off course !)

A copy of snes4iphone

And lastly SNES game ROMs

NOTE: I am not mentioning any of the advise on jail broking your iOS running device but though it crucial, and it would run perfectly with iOS version is 4.3.3 thus if you have another one you must have to upgrade the version for sure.
Reply With Quote
#3
Old 29-08-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Play SNES Games on IOS running device (IPAD) by Wiimote
Snes4iphone: Installation and configuration

Formerly since you’ve make available all the obligatory equipment counting that all significant jail broken gadget, as complete gathering all such you’re almost prepared to get started. You have to just follow the steps In order to get snes4iphone application to your device.

Steps:

First of all you have to open up Cydia on iPad and hit the search button on the bottom toolbar and look for snes4iphone. As soon as you click the button present over there a page will appear from where you have to buy the application. and it would cost you around 5.99 US dollar and You’ll have option to checkout using either Amazon or PayPal Payments. You can simply refer the Image mentioned below.

(NOTE: You’ll not get the application for free but I am not sure about the other application but still there are many that you can make use for the same and they are free but I strongly recommend you to use the mentioned one)

Since you’ve set up snes4iphone application in the device run it, and as you are running it for the first time it will prompt you by saying “No ROMs found. Would you like to find them?”

And If suppose you click “Yes” you’ll be taken a Google search for legal ROMs and a listing of places you can download them. But at this moment you have to select “No” thus we can do petite configuration.

After clicking “No”, you have select option button and that would be appeared in the lower right corner. And as the option comes in to view change the settings for “WiiMote Support” to “on’. Refer the Image mentioned below.

Once you’ve changed the options reboot snes4iphon application.

As you done with the above steps and after re-launched, snes4iphone will advise you to sync your Wiimote. And as you have selected the “Wiimote support”, “on” You’ll be prompted each and every time you start the application.

Now for syncing you need to press 1 and 2 buttons concurrently to sync the Wiimote to the iPad.

Overview of other options mentioned:

Skin: permit you to switch between different application skin available.

Scaling: you can set the size of the device’s screen according to the games resolution.

Autosave: Application will automatically saves the game in the background

Framerate Counter: you can set the frame rate according to the game by turning it on and off.

Transparencies On: Decrease graphical richness and increase the stabilization.

Smooth Scaling: after toggle, the game looks a little fuzzier but a lot less sharp.

WiiMote Support: Toggles the Bluetooth connection to the Wiimote.

7- As you completed the above steps the only thing that you need is the game ROMS.

Reply With Quote
#4
Old 29-08-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Getting SNES ROMS for the application:
Getting SNES ROMS for the application:

Steps:

There are two technique for loading game ROMs onto your device. The first technique is the simplest, even though it does entail a set of pecking away at your touch screen.

From your snes4iphone application loaded, hit the “search” button. Once you click that a web browser window will open within a application only with the search query “doperoms legal backups” loaded.

You can redirect to the DopeROMs website if you choose the first link rather at this moment you have to hit the second one which should read “Super Nintendo – Snes – DopeROMs”.

As you click there you’ll discover almost hundreds of SNES game ROMs available for download. But the only problem is like you have to hit all that you want to load concurrently, I mean to say you cannot download them all in one shot.

In other way you can download the ROM from any other source as well if you are aware of and then transfer them to your device using SSH client like WinSCP or CyberDuck . you have to copy them to the below mentioned directory.

/var/mobile/media/ROMs/, on your device.

Once you have copied or simply downloaded all the files to you device Navigate back to the main menu by tapping the Browse button in the lower left corner and select the game that you want to play.

As you hit the button you’ll get four options for portrait |landscape and sound |no sound. You have to select according to your convenience.

And you are ready to play the games.

Reply With Quote
Reply

TechArena Community > ARENA > Guides & Tutorials

Deus Ex: Human Revolution Xbox 360 Walkthrough & Cheats

2012-02-05T08:38:00.001-08:00

In Deus Ex: The Human Revolution play to Adam Jensen, a security specialist, hand to oversee the defense of one of the most experimental biotech companies in the United States. But when a black ops team breaks in and kills the scientists who were hired to protect, change everything you thought you knew about his work. At a time when scientific advances are routinely becoming athletes, soldiers and spies in enhanced super beings, someone is working hard to ensure the development of humanity follows a particular path. Need to find out why, because the decisions taken and the decisions you make will be the only one who can determine the future of humanity.

Deus Ex: Human Revolution is the expected return of the award-winning franchise that combines the best action-RPG: the perfect mix of combat stealth, hacking and social play. When seriously wounded during an attack on the scientist who had to protect, you are not forced to be increased mechanically. And soon you will find yourself chasing down leads around the world, never knowing you can trust. At a time when scientific advances are becoming athletes, soldiers and spies in enhanced super beings, someone is working hard to ensure the development of humanity follows a particular path.

Game Story :

You play Adam Jensen, an ex-SWAT specialist who's been handpicked to oversee the defensive needs of one of America's most experimental biotechnology firms. Your job is to safeguard company secrets, but when a black ops team breaks in and kills the very scientists you were hired to protect, everything you thought you knew about your job changes. Badly wounded during the attack, you have no choice but to become mechanically augmented and you soon find yourself chasing down leads all over the world, never knowing who you can trust.

At a time when scientific advancements are turning athletes, soldiers and spies into super enhanced beings, someone is working very hard to ensure mankind's evolution follows a particular path. You need to discover where that path lies. Because when all is said and done, the decisions you take, and the choices you make, will be the only things that can change it.

Game Characters :

Adam Jensen

A 34-year-old Caucasian male from Detroit, Michigan, ADAM JENSEN is an ex-cop turned private security specialist for Sarif Industries, a moderately-sized biotechnology company based in North America. He is what you would call a 'working class hero:' dependable, resourceful, curious in a stand-offish way, with a streak of hardcore cynicism mixed in.

Dr. Megan Reed :

Megan Reed is a scientific genius, a leader in the field of human enhancement technologies, and the most prominent neuroscientist working for Sarif Industrie. She is in her early thirties, Caucasian, and completely unaware of how good-looking she actually is. Reed grew up in Seattle, the only child of two doctors who both decided early on that family life would never interfere with their careers.

Davi Sarif :

David Sarif is the founder and CEO of Sarif Industries, a moderately-sized biotechnology company based in North America. He is a well-preserved male in his late 50s, of average height and build, in decent shape. His features are Mediterranean. The son of an immigrant family from Boston, Sarif was brought up to understand the value of hard work and dedication, and from an early age his insight into machines set the tone for the man he would become.

Laurence Barrett

A White male in his mid-30s, Lawrence Barrett is part of a team of elite, special operations mercenaries working for Belltower Associates, a private military corporation. At first glance, he is the classic example of a US Marines poster boy: impeccable crew cut, muscular frame, a sense of coiled energy, and a machismo that just doesn't quit.

Jaron Namir :

An athletic and well-augmented male of average height, Jaron Namir is the highest ranking special operations mercenary currently working for Belltower Associates, a private military corporation. He has dark brown eyes and an intense metered gaze. His hair is short and dark with some gray creeping in. While on duty, he wears his combat gear like a second skin, moving with the easy, lethal grace of a career killer.

Yelena Fedorova :

With an athletic build and statuesque, augmented height of 6'7", twenty-six year-old Yelena Fedorova is a trained assassin, part of an elite team of special operations mercenaries working for Belltower Associates, a private military corporation. A black woman with a cut of shoulder-length, spiky black hair, she's rarely seen out of her combat gear; her only affectation is a silver cross on a black steel chain around her neck, a family heirloom of great personal value.
Reply With Quote

Modding and tweaking the Sony Ericson xperia arc

2012-02-05T08:37:00.001-08:00

Hi, I have noticed that so many people’s have problem with their sony ericsson device and thus I am posting this thread in order to guide them, there are several process I have included in the article you can see it below.

INDEX:

Bootloader – Unlocking

Bootloader - Re-locking

Rooting – GingerBreak

Rooting - Recovery update method

Recovery

Updating firmware/flashing ROMs – Flashtool

Reply With Quote
#2
Old 07-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Modding and tweaking the Sony Ericson xperia arc
Bootloader – Unlocking
Steps:

Before performing this steps it is strongly recommended as back up all your important data and information from your device.

After that you have to Download Fastboot and retrieve your unlocking key from Sony Ericsson's website. And for getting the code you have to follow the steps which is necessary and while doing that it will prompt you for your name, e-mail address and IMEI number of your mobile.

Extract the contents of the fastboot rar file you downloaded and open the folder that is extracted

open CMD and modify directory to the folder that fastboot.exe is in.

As you complete with this you have to connect your phone thus first of all switch it of and press and hold the Menu key and with that connect the USB cable. And you’ll be able to see the indicator LED next to the USB port should twist blue to point to your are in fastboot mode.

Once your phone is connected in fastboot mode and any driver installation has completed, type “fastboot.exe -i 0x0fce getvar version” into the command prompt you opened in step 4 - this should return a value such as 0.3 or like, if it doesn't then the phone is not connected properly, start again from step 4.

If you perfectly completed step 6 then type fastboot.exe -i 0x0fce oem unlock 0x into the command prompt, being alternate for the exclusive unlocking key you retrieved in step 2

You should observe a few text output by the CMD stating that it is removing certain blocks and then that it is completed.

Reply With Quote
#3
Old 07-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Modding and tweaking the Sony Ericson xperia arc
Bootloader - Re-locking

Steps:

For doing this you need to download and install FlashTool and Blagus' re-locking .ftf and put it in the /firmwares sub-directory of where you take out FlashTool to.

Download this file, rename it to arc.sin and put it in the /loaders sub-directory

as you completed with this you have to switch off the phone and run FlashTool.

After running the software press the 'Flash' button and select the .ftf file you desire to flash

When provoked, connect your handset in 'flash mode' -

When FlashTool finishes, disconnect your phone and switch it on - don't worry if it's a little slow the first time it boots after flashing.

Reply With Quote
#4
Old 07-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Modding and tweaking the Sony Ericson xperia arc
Rooting – GingerBreak

Steps:

Download GingerBreak v1.2

Transfer the apk file to your phone's memory card

Prepare your device for connecting:

• Ensure that you've got a respectable charge or better yet connect the handset to a charger

• And If possible you should try to connect it to wi-fi for best data speeds and to avoid the signal dipping out

As you complete with this Update your handset to 2.3.3 OTA:
• Menu > Settings > About phone > Software update > Update now

Reply With Quote
#5
Old 07-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Modding and tweaking the Sony Ericson xperia arc
Rooting - Recovery update method

Steps:

• You have to download “Bin4ry's root” zip file and save it to your device's memory card
• Boot the device into recovery mode
• Install the root zip:

choose 'install zip from memory card'

choose 'choose zip from memory card'

Navigate to where the zip file is on your device's memory card and select it

And off course you must have to corroborate you desire to install the zip.

Reply With Quote

How to install Snow Leopard on Gigabyte GA-E7AUM-DS2H

2012-02-05T08:36:00.000-08:00

Here is a short guide which can help you to install Snow Leopard on Gigabyte GA-E7AUM-DS2H motherboard. Many hacks are now available to run Mac operating system on regular system. But there are still lots of limitation. It is just for fantasy you can use mac os on your regular desktop. Currently Apple does not provide any proper release that can be configured on assembled system and we also know that Mac systems are not cheaper. So better with the help of some mods we can surely use this for our satisfaction. Go through the post below before doing any changes. If you have any kind of important data in your system, keep a backup. Second thing before doing the setup you must begin with collecting all necessary updates and patches. I am here just showing the way to use it no downloads are provided. That you have to search on your own as there are many website which provides you this updates for free.

Another important thing before beginning. You are going to install Apple operating system on an Non Apple hardware. There are certain legal laws which are intended to stop piracy. So do not go for any of hacks if that is illegal. This is an testing purpose tutorial for those who really like to test the performance of Apple operating system on non apple systems. So be sure whatever you do, you are doing on your risk. Some of the system might fail to function in case of wrong setup or improper configuration. Before beginning I will recommend you to keep a usb mouse and keyboard ready. A regular sata drive and dvi connection is enough. Read and keep important point mark of this post. Blind setup can provide non functional system.

Before beginning I will recommend you to test your ram for errors. Because there are some issue with the setup if there is any problem in the ram. There is an tool called Memtest which can diagnose your ram for error. Many setups fails due to this and users do not find the reason behind the same. Faulty ram can be a big reason behind non working of this operating system. So better run this tool. The tool is free to download. Download and burn the files on a disc. Remember it is an bootable disc. You can also find the same tool on UBCD. A clear test is necessary. I had attached Chameleon loader to the last post. Download this. This loader has 2GB ram issue fixed. So this will give you an great help while booting from Snow Leopard.

For installing I will recommend you to go with Vanilla. This works easily with some kind of fix and relatively few kext files. Other issues can be found as you keep moving and using the tool. For novice there is an warning, that do the same on your own risk. You are going to perform some major modification on your system which can kill your board. Before beginning the setup, I am going to provide you most common problems and its resolutions. Just like an checklist keep an eye on the same. So that you do not collapse after settings, for non working stff. First issue it the 2GB ram limit. I do not know much about the fix, but it is found that current setup will not work if the ram exceeds 2GB. So that is the place where care should be taken. Second the sleep mode is the place where things do not work properly. System will not wake from sleep on this. So avoid such settings. And better check for more bugs and report here, so more improvements can be done.
Reply With Quote
#2
Old 10-09-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: How to install Snow Leopard on Gigabyte GA-E7AUM-DS2H
Installation Steps :

Before beginning I had attached some files to the end of post. There is folder package which consist of this files have 3 different packages which are very important. You have to create a boot disc to begin the installation of Snow Leopard. For that you have to download the iso file which is provided in the folder attached below. There are more files needed. I had mentioned names of 4 files. Copy them on a usb drive and keep ready for the further process. Other files which you will need are :

OSX Univeral installer
dsmos.kext
SMBIOSenabler.kext and
AppleHDA.kext.

Once done with that you have to flash your bios. Bios flashing is very risky job. There is an patched bios provided by Koalala which you have to search and run it. Flash the bios with this and move to below steps.
Once you are done with BIOS update and your system is not dead then just make an simple settings. Go to your bios and select load optimized defaults. There are some settings you have to enable from bios. Enable Onboard IDE controller, NV SATA controller & usb mouse. Enable AHCI mode for On-chip SATA mode. Save the settings and then boot from the boot cd. Once your system boot, you have to remove the disc and then provide the Snow Leopard Retail DVD(9f). Follow those regular screen instructions like your language and other stuff. Now it is time to optimize partition for Mac system. Run Disk utility. You can find the disk in the menu listed. You have to choose GUID Partition option for your disc. This is an very important step. So be sure and slow to do this. The default partitioning format that is identified by Mac operating system is Mac OSX Extended journaled. Format the partition and then begin the installation.

Once partition steps are ok and there is no issue, exit the disk utility and move further. Again insert the boot disk on reboot and choose id 80/81/82 to get the proper disc. When the operating system is properly booted you can go with the screen procedure for new account. Now I had mentioned some files above before beginning the installation. You will need those files. Keep that usb ready. First you have to run UInstaller. You can run that by double clicking on it. The setup will begin. Now select your hard disk and choose Install PC_EFI V9 Chameleon. Once you are done with the same you will also have to choose the option Install Custom Kexts. Give the location of kext file located in the usb disc. Choose all the files. Just ensure that you had selected Apply kext package, thats all. Do not choose any other option. Click on install and once everything goes fine exit the installer.

An important step now you have to perform here is to fix the disk permission. This can be done itself from Application > utilities. Look for an option Repair Disk permission and run it. Restart your system and remove the disc. You can run nForceLan package to make your lan work. If not then lte it be. There are many fixes and mods that you can try here after proper reboot. Some bugs cannot be resolved but still there are many updates and patches that can help you. For every kind of update there are different patches which can be found on internet. Modders do not provide any kind of official update, so it is entirely your choice to run the updates.
Reply With Quote
#3
Old 10-09-2011
Wadee Wadee is offline
Member

Join Date: Apr 2010
Posts: 57
Re: How to install Snow Leopard on Gigabyte GA-E7AUM-DS2H
I tried some steps on the above, the system worked. But really when you try to run Mac based operating system on non apple hardware, it is very annoying. There are many bugs that I found and really no worth to discuss. You cannot fix them all and make it perfect. I hope that in coming time, Apple will too provide retail operating system which can be compatible with every type of hardware. That is why people find Windows to use much better. Anyhow there are not less number of hacks for both.

Dead Island Walkthrough, Cheats, Tips and Hints

2012-02-05T08:35:00.001-08:00

Dead Island combines first-person action with a heavy focus on melee combat, character development and customization of a vast array of weapons. All of these gameplay features presented in a dark story inspired by classic zombie movies with a gritty and engrossing campaign that can be played with up to 4 players in co-op mode.

Game Plot :

I had taken maximum information on gameplot and story from the official website to explain the same in better way. The reason for the same is that, the official website can simply explain the game plot much better. This helps a lot at the time of playing. The player is drawn into the world of Dead Island on the brink of a mysterious epidemic that suddenly, and without warning, breaks out on the fictional island of Banoi. As a guest of the Royal Palms Resort, the player's stay was supposed to be a dream holiday; a luxurious getaway to the beautiful beaches of a tropical paradise. But faced with the reality of a zombie apocalypse, there is only one thing left to do: Survive. This is Dead Island... a paradise to die for. Players reside in Royal Palms Resort of Banoi. The place of action.

The Royal Palms Resort offers exceptional service and every modern amenity. Our 127 spacious, climate-controlled rooms offer a spectacular view of either the jungle highlands or the Pacific Ocean. All our first class accommodations offer a private balcony or a patio where our guests can enjoy a cocktail and enjoy warm, equatorial breezes scented with the heady perfume of rare tropical blossoms.

Game Characters :

Xian Mei : Xian Mei is an employee at the Royal Palm Resort, born and raised in China, she chose an occupation that allowed her to leave her country of birth in order to experience different people and cultures - Banoi is her first placement outside of her homeland. She is a fast learner, intelligent, and also - as a passionate sportswoman - quick on her feet. Having just arrived at the island, Xian Mei was responsible for a myriad of menial tasks at the hotel, before starting work as a receptionist. This opportunity to meet and greet all the different nationalities that visited the hotel was ideal for Xian Mei, as it provided a perfect source of inspiration for her dreams of travelling the globe. That is of course, before suddenly the world around her begins to crumble...

Sam B : A one-hit-wonder rap star of fading fame, Sam B was booked by the Royal Palms Resort Hotel to perform his well known song "Who do You Voodoo?" at a high profile hotel party. He gladly took the chance to play this gig. Once strong, self-confident and proud, Sam B has had a troubled past and a history of drug and alcohol abuse, as his private life became caught in a haze of fake friends and bad advisors. Trying to pick up the pieces and earn some extra cash, he suddenly finds himself surrounded by a whole lot of different problems...

Logan : A former American football star, spoiled by life and successful in every possible way, Logan's ego finally put an end to his bright future. Taking part in a reckless street race with tragic consequences, Logan not only killed a young woman - his unfortunate passenger; he also fractured his knee, putting an end to his sports career. His fall from stardom inevitably followed and he plunged swiftly into a life of bitterness and despair. In an attempt to get away from the demons hunting him, he gladly takes the chance to experience the beauties and wonders of Banoi. Soon enough though the getaway he was dreaming about turns into a real life nightmare...

Purna : Purna is a former officer of the Sydney Police department. After losing her career when she killed a child molester who could not be touched legally because of his wealth and connections, Purna then turned to working as a bodyguard for VIPs in dangerous places all over the world. She is hired not just for her skills but her looks as wealthy men did not mind showing up with Purna on their arm.

Enemies

Walkers : Most common zombie attackers. To kill them move a bit back and hit.

Infected : They scream and run towards to kill. Once they charge on you, dodge to skip the attack.

Thugs : Tall zombies with more power to hit you. They charge to you. Hit on the head.

Suiciders : Very disgusting looking body. They charge to you an explode. Use gas canister to kill them.

RAM : Most powerful zombie. Hit from backside.

Floaters : Toxic zombies. Use your guns to kill them.

Butcher : Very dangerous. Mostly found in Jungle. Use Guns and knife
Reply With Quote
#2
Old 12-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Dead Island Walkthrough, Cheats, Tips and Hints
Walkthrough

The below walkthrough will guide you for the entire gameplay. Basically I used the most exact points in order to avoid a very lengthy walkthrough. Along with this you have more information related to basic updates and controls. Mostly this guide is helpful for all you are playing Dead Island on PC, Xbox 360 and PS3. Dead Island begins with a fiction island Banoi. It is a small paradise located in the South Pacific. Royal Palms Resort is the ultimate place here for those who come for holiday on the island and enjoy sun. This simply make you remember for more common stories that you find in many horror movies, where some people travels to an distant place where there is no way out. It is a perfect set to the mood.

The pictures changes as the madness rise by zombie attack and chaos uproars. The zombie outbreaks are contagious can effect anyone and destroy the peaceful atmosphere. You are in alien location where no one for help and completely cut off from other connection. Those strangers who are not yet a zombie are in the fight of survival. They too protect other survivors form the island. The game has nice gameplay and a different look this time which will surely horrify you.

Quick Guide :

Chapter 1 :

Talk to Sinamoi - 1st Quest
Find Steven - The Lost Mission
Kill zombies on Sinamoi’s bungalow
Reach Pool to kill more Zombies. Collect weapons.
Reach the Bungalow. Follow the radar. Collect Personal ID. Free up survivors.
Return to Sinamoi

Chapter 2

Collect Spark Plugs for Hank
Collect Gas for Mike
Look for Kelly’s Husband – Max Quest
Collect radio amplifiers for Dominic
Collect Medicine for Jack
Collect Jeannine’s Necklace
Collect Car parts near Lifeguard Tower
Drive and leave Roger wife on lighthouse
Fine Maggie. Find a Car
Help Survivors - James Quest
Go back to Jeannine
Go back to Stanley

Chapter 3

Drive Truck to hotel after talking to Sinamoi
Collect the keycard by hitting the thugs out. Enter parking lot
Follow Radar. Meet Davies. Collect Newspapers.
Go to Ken. Collection Medicine for him.
Follow Davis to Server Room to reboot computers. Reach the garage. Drive Truck and crush the zombies

Chapter 4

Talk to Sinamoi for new quest. Chopper Quest
Rescue Alfred.
Kill Suicider. Meet Nikolai. Take him to the bunker and kill zombies
Follow Radar to Water dance mission
Reach different Gas Stations. Reach Warehouse after.
Meet Harlan. Collect the keys by killing the thug.
Carry the truck to the mechanic. Meet Earl. Get a Tank.

Chapter 5

Go upstairs in Church. Kill Ram.
Turn off church bells. New Mission from Nuns. Rescue people
Bring medical for nurse. Complete insulin quest.
Meet Simon. Kill zombies in warehouse.
Accept Simon’s mission. Collect First Aid.
You will have to finish many short missions here.

Chapter 6

Meet Hugo at church.
Collect flashlight batteries for Ryan.
Finish Joseph quest.
Meet Garrett.

Chapter 7

Meet the Mayor. Go to supermarket.
Look for Skull Orange collectible.
Meet Joy. Go back to City Hall. Collect Mayor’s key.
Meet Mother Helen. Meet Jin. Help Bruno
Meet Reza. Go back to church. Go back to Lifeguard Tower.
Talk to Sinamoi.

Reply With Quote
#3
Old 12-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Dead Island Walkthrough, Cheats, Tips and Hints
Chapter 1

Game begins with a short introduction to the island. There certain tips that you can use. These tricks will also help in between the game. The first thing is going easy with controls. You have to pick up certain stuff. You can use the radar for the same to reach those things. You begin with a room in the hotel. Collect certain stuff from the room and move further. Follow the radar for direction. There some cash located below TV. Go down by following the indication on Radar. The first steps are just to get proper control on your mouse or joystick like controlling the door knob to pass on the other room.

You have to move in the room to search for items that are indicated under your objective. You can see a lobby which follows the hall. There are number of suitcase loaded up. Use the radar to locate the right door for your. You have to collect cash in this case to increase your inventory. Collect as much cash you can because this is going to help you further to buy for items. As you keep moving you must carry a stick with you incase you encounter any zombie. You will also find a card which you have to take back to Sinamoi. A cutscene will tell you about the survivors. You have to leave fast here and this is the time of action. You can easily kick zombies down and blow their head. More money can be found from the bodies of Zombie.

Anyhow you will have to make a way to lifeguard tower. Survivors will be following you. With the help of cards you can unlock the gates and then move. In the mean way you will encounter many zombies. So better use whatever you can find. You can throw large canister to the hoard of zombies. As the time passes it will become darker. So your first task here is to light the torch on Lifeguard Tower. Or else the gameplay will become tougher. Quickly make your way to the Lifeguard Tower. There are energy boosters you can find on the island and on various parts. So keep your eye open for the same.

As you came out you have to go upward to the stairs. There are more zombies inside. Kill them all collect money. There are certain blue prints located in specific parts only. Look at them to collect more weapons. Once you are done with this you have to go back to Sinamoi.

Chapter 2

As the Sinamoi part is ended then the first job you have to do is search for energy boosters. Drink them to get your full health. Go down. A new mission begins here. This mission is to collect all the parts of your car. Watch carefully on area around you. More Zombies will attack you. You have to find 4 parts here to finish the first task of level. Look for Ambulance. That is the first place to get upgrades. Once you find all the car parts in the area you have to reach Mike. As you move inside you can find Jack. Help to get in the office and he will give you new quest.

Now with your car move towards the live tower. There are some people inside. Talk to them and then move back to James. All will not talk, you will have to keep moving to each people to finish this task. As you finish your conversation with James, then you have to help some people in that Lighthouse and then you have to go back to Darwin. Darvin will give you a job to deliver a pipe to Marcus. You have to use the map to locate the place of Marcus. As you reach near, you will attacked by Zombies. Kill them all and reach Marcus.

As this is done, take your car and you can find a hut. This is a kind of old beach house. Get out you car move down. Go the below hill you can see an other car standing where you will find Jessica. Jump in that car and you will find two new characters here Jessica and Rodger. Talk to them. Now your lighthouse mission begins here. Move the to the safe house and watch the Zombies. Kill them all. Suddenly you can see alarm ringing you have to stop it by turning off the switches and then moving back to Marcus and then you have to meet Jessica end up this mission. Last you have to reach back to Darvin Back to end this chapter.

Now you enter in the second part of this chapter. You have to move to the petrol station from here. And there you can find Dan. After your words with him you have look for an ladder which will take you up and there you can find some energy drinks and weapons. Go back to the petrol station. Remember the zombies can attack you so keep a close watch and then move. Use your car to crush the coming zombies and get rid of them. Search for an petrol canister. You can find that from the garbage and you have to carry this to Mike. Once you are done with this go back to Sinamoi. The mission here is to carry 3 cans of bean to Sinamoi and then search for two crates of juice.

Every crate can be fine in different petrol stations. At the second petrol stations there are zombies. To knock them out you have to from the roof and enter the building by breaking the glass. Collect the juice and put the same in your car. You have to put those juice in the garage and then go back to Sinomoi for upcoming level.

Chapter 3

In this chapter you have to go through the parking area, get a car and collect items for the coming mission. So better collect as much as you can by navigating in that area properly. AS you reach your point you have keep on killing the zombies which will march on you. AS you keep killing your health will loose. So keep collecting stuff which will keep you moving. Those can be weapons or drinks. Now go to the hotel. In the Hotel you will find many things. You can collect lots of cash killing out all zombies. Search Mike and Ken. You can find Ken on the top floor of the hotel. For Ken you have to search morphine which is the medical part. Keep a watch on map for your next location. Every time on your arrival you will face zombies.

Once you are done with Ken’s job then you have to restore the computer firewall so that you can make those computer work. You have to fix them and at the same time zombies will attack. Find for items in that area. Go down. You can see a hoard of zombies attacking you. There is no other way. You will have to pass through between them to reach your car.
Reply With Quote

Warhammer 40,000: Space Marine Walkthrough, Tips and Cheats

2012-02-05T08:34:00.003-08:00

Third-person action pure and simple. That's what brings Warhammer 40,000 Space Marine, a title which has quickly be compared to Gears of War for anabolizado muscular appearance of the protagonists, and also by gender and the perspective that both releases made in terms of positioning the camera. But this feeling would stay with very little further than the title of Relic brings, and is slightly scratching the varnish shooter brings the title quickly see many differences. The most striking is, in fact, much of which has turned the Canadian study to achieve an experience of combat at the height of what to expect. As we advance in time from our first contact in play a Space Marine Space Marine, Titus, who will defend with their fellow humanity from orc attacks. The monstrous enemies are attacking a planet that acts as forged in the arsenal of man, and losing it would be a hard blow for humanity which could not recover.

Titus has to come out on top of the stake with a classic style armor Warhammer is one of the reasons why the game avoids the use of hedging, since according to them discuss the presentations of the game would not make much sense to use parapets with armor as robust as our protagonist. An alternative to the use of hedges? Shattered. In Space Marine armor thanks to our aforementioned can run directly against a wall and destroy him and whoever was behind it. But the weapons will be the main method to kill our enemies. Relic has revealed that there will be 15 different types of weapons and can carry 2 at a time. Also they will progress as we go using them, and adding elements that can improve not only change its power, but also result in a changing appearance and more fierce. The sword-saw has been one of the arsenals of melee on which Relic has turned in presentations, and demonstrated how Titus is capable of shattering (literally) enemies because of it.

Warhammer 40,000 Space Marine is available on sale for PC, Xbox 360 and PlayStation 3.

In Warhammer 40,000 Space Marine you are Captain Titus, a Space Marine of the Ultramarines chapter and a seasoned veteran of countless battles. A millions-strong Ork horde has invaded an Imperial Forge World, one of the planet-sized factories where the war machines for humanity’s never ending battle for survival are created. Losing this planet is not an option, but a darker and far more evil threat is lurking large in the shadows of this world. With an Imperial liberation fleet en-route, the Ultramarines are sent in to hold key locations until reinforcements arrive. Captain Titus and a squad of Ultramarine veterans use bolter and chainsword to take the fight to the enemies of mankind .

COMBAT SYSTEM :

Space Marine features a fluid combat system that allows players to seamlessly switch from ranged to melee weapons without interrupting the flow of combat. Hitting the melee button at any time will result in a close range strike with the equipped hand-to-hand weapon as well as the camera pulling out to melee distance. Pulling either trigger will instantly snap the view back to behind the player’s shoulder ready for precise shooting. These systems are immediately responsive and leave the player in full control at all times. As the player dispatches enemies in Space Marine they will be earning FURY which can be used to unleash devastating ranged or melee attacks.

The player can use FURY MARKSMAN to enter a heightened form of awareness where time seems to slow down allowing them to pick off multiple ranged enemies in the blink of an eye. Alternately the player can opt to utilize their FURY STRIKE up close and personal with a sweeping area of affect attack that will obliterate anything close enough and knock-back and stun more distant foes.

WEAPONS :

CHAINSWORD : The standard melee weapon for Space Marine with motorized monomolecular-edged teeth capable of slicing through armor, flesh, and bone. Fast and responsive in the hands of Assault Marine it is capable of sawing through a variety of enemies.

PLASMA GUN : A two handed rifle that fires pulses of superheated ionized gas towards the enemy that detonate with the power of a small sun. A two handed rifle that fires pulses of superheated ionized gas towards the enemy that detonate with the power of a small sun. While extremely effective at melting through enemy armor and vehicle, the plasma gun is also prone to building up dangerous levels of heat that must be vented to prevent the shooter from being injured.

POWER SWORD : More powerful than the Chainsword, the Power Sword sacrifices some of the additional damage of heavier melee weapons like the Power Axe with a faster attack speed.

THUNDERHAMMER : An extremely powerful, but slow melee weapon that builds up an immense energy charge that is released upon impact with a target and decimates everything within its area of effect.

BOLTER : The standard Space Marine assault weapon that fires small missiles, or 'bolts'. Each self-propelled bolt contains an explosive charge that detonates once it has penetrated the target, blowing it apart from the inside. Effective against a wide variety of targets.

BOLT PISTOL : A handheld sidearm version of the bolter that is typically wielded alongside the chainsword.

STALKER PATTERN BOLTER : Most typically found amongst the Ultramarines and their sub chapters, the Stalker Pattern is a semi automatic bolter upgraded with enhanced targeting arrays and is deadly at medium to long range.
Reply With Quote
#2
Old 13-09-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
Re: Warhammer 40,000: Space Marine Walkthrough, Tips and Cheats
Game Characters :

CAPTAIN TITUS : Captain Titus of the Ultramarines has fought for the Imperium for more than 150 years. Although considered a relatively young Space Marine. Over his long service, Titus has overcome countless opponents and suffered many wounds, both physical and psychological. In his earliest days, he struggled to overcome his own temper. L
SERGEANT SIDONUS : Sergeant Sidonus, the Veteran Ultramarine, has seemingly seen it all. His ‘been there, done that, no problem’ attitude and dry sense of humor instantly serve to defuse tense situations. But when faced with the enemy, Sidonus is their worst nightmare – a brutally efficient warrior who won’t stop until every enemy lies dead at his feet.

LEANDROS : Leandros is the most recent inductee to the Ultramarines command squad. He looks up to battle brothers Titus and Sidonus, but especially Titus, whom he sees as the type of Ultramarine he aspires to become. He sometimes goes overboard in pursuing what he thinks is a noble course of action, because he wants to prove himself and his abilities.

2ND LIEUETANANT MIRA : 2nd Lieutenant Mira leads a beleaguered Imperial Guard force against the Ork invaders of the Forge World. Her soldiers are survivors of a much larger detachment that was decimated after the Orks cut them off from orbital support and reinforcements. Lieutenant Mira was part of the 203rd Cadian regiment that was on route to another war zone.

INQUISITOR DROGAN : The Inquisitor is a relentless member of the shadowy organization charged with destroying the enemies of the Imperium. He bears the physical and mental scars of a lifetime spent in the darkest corners of the Galaxy. The Inquisitor has pursued technologies and techniques thought lost or impossible in his battle against the alien. His greatest creation is a unique power source that channels tremendous amounts of a mysterious energy.

ENEMIES :

The ORKs

GRETCHIN : In Ork society the tiny Gretchin are at the bottom of the pile. They are often enslaved and forced to serve their Ork masters. Gretchin attack in mobs and although relatively harmless to a Space Marine can serve well as a distraction for something bigger and more deadly.

Mac OS X iDeneb Installation Guide for HP Mini

2012-02-05T08:34:00.001-08:00

Many of use always believe in checking before buying. You can do that easily by going in your nearby shop and viewing the demo product. But for advance work like software or hardware testing we prefer to run a sample on our system to get a better feel of the same. This guide is just for the same purpose to provide you and way, by which you can run OS X on HP Mini 110 series laptop and check that how an ultra-portable can perform on Mac operating system.

The below guide will help you to install OS X on HP Mini 110 series laptop using iDeneb. There are many other guides which you can use to install better version of Mac operating system. There are several issues in installing this operating system on non-apple devices. But there are enthusiast who wants to test and run Mac based operating system on their current system. There are number of boot loader also which makes your job easier, but there are many bugs. And that is due to different hardware architecture. Those who own an ultra-portable laptop like Hp Mini can use this guide to run OS X on it. But this is a testing purpose guide, you cannot use a commercial operating system for free. There are some legal fees that you have to pay to the manufacturing company.

The guide describes many process which leads to extreme modification of systems hardware and firmware. So that can be a bit risky if it is not performed well. So the entire risk lies on you. Better go through this guide and many other guides and tutorial also before performing any changes. This guide can recommended for this who has better knowledge about formatting and creating multi boot disc. There are certain pre-requirement that you have to follow before doing this. And if you do not meet this pre-requirement then better avoid the below steps.

Note : Remember that using Apple operating system without purchase on your system can be illegal. So be ensure that you had found an authorized copy of the operating system.

MAC PC

The below entire process if for Mac OS X System. For those who want to do this on Windows can skip the below and jump to Windows part.

Pre-Requirements :

First you must ensure that that the netbook must have at least 16gb of free space. Better if more than. You can keep an dedicated partition separate for this. Enough free space is essential for partitioning and creating a boot media for OS X. Lack of space can cause failure of entire process.
Verify that the bios version of HP Mini 110 series laptop is above 5.0. The setup cannot work on lower version of bios. You can run the updates if you can found any better source of bios download.
You need an flash drive or an external usb drive. The minimum space recommended for the same must not be less than 8GB. Also keep an usb mouse ready for further process.
Download iDeneb version 1.3. It is not recommended to go with any other version. I tested on this and it worked fine. But if you want you can try another version on your own.
For running Mac OS X on Hp Mini there are some patched files which are needed at the time of setup and after that. This files are kext, gui patch, osx86tools, uinstaller, etc. I am here providing an list of files below which you have to find on your own. You can search on web : HP Mini OS X Essential Files. There are many sites which are providing this. Below list is just an reference you can use.

**OS X Files for HP Mini :

DSDTPatcherGUI
Kexts
OSX86Tools
Uinstaller
DDmac

You collect this files and download the same. Luckily I just found the Kexts file. The file is attached on 4shared. Try this download Link

How to create a bootable iDeneb Disc :

Before beginning one thing I will ask you to first create an iDeneb OS X version 1.3 disk image. Keep an multiple copy of the same. You can download it from the web. Download only the 1.3 version only. Because I found this as the most stable one, and there is no bugs also. It is also right that many of your hardware or app will not work on this. But atleast you have a look how the interface of this operating system is and its performance.

You can create a bootable iDeneb disc in many ways. There are some ready to use installation programs on web which helps you to generate an automated disc. I am mentioning a similar step to that. Usually it is recommended to use this via USB flash drive for better speed. Many time I had faced a bug while running setup and making changes via CD. Usb flash drive are more reliable and you are aware that every ultraportable supports usb boot disc. You can use an usb dvd drive also but I am not sure that this work or not. So the easiest way is to go with an usb drive. Before beginng you will need to create an Mac bootable partition. That can only be done with the help of system which has Mac OS X. An tool called Disk Utility is used for this purpose. Mac based system cannot read Fat32or Ntfs drives. They have different kind of partition format.

Creating iDeneb Mac OS X bootable USB drive on MAC

If you cannot manage an Mac system then you can use EFI disc. This cd can give you Disk Utility support. It is an bootable disc. This is an alternative way to format the usb drive on Mac readable partition. The first process begins with creating a usb drive that Mac operating system disc can recognize. This is an very crucial step and ensure that it is done properly.

Run Disk Utility. It is located in Application > Utilities.
In the window on the left side you can see the drivers listed. Choose the pen drive and then click on Erase.
Now click on Volume Format > Mac OS Extended > Erase
Once things went fine there then click on Restore. When you will click on Restore you will need to provide the location of .iso file of iDeneb image file. Provide the place where it is located. When you find the same click and choose it.
Now you can see the iDeneb image file in Disk Utility window. Now there is an bit drag and drop operating here. So you must read this carefully. Now you can see iDeneb on the left side. There you can 1 more image which is quiet located next an Apple logo. Have a look on the same properly. You have to now drag that image at the source location. Once you did that properly and you can see the path then the next step comes is providing the destination. For this you have to drag the usb drive to the destination. This is easy once you understand you have to give the image location parth and then usb drive for destination. Then click on Restore.
Once you done with properly then run UInstaller. In this choose the formatted drive. You will need to tick some options here. Tick on Install PC_EFI v9 Chameleon Edition 1.0.12. Chameleon is an bootloader which is very necessary to allow Mac OS X boot from drive. If this bootloader is not installed you cannot run Mac OS X after reboot. Click on Install to install the bootloader. I had told you to keep some files ready above. You must keep the files separately copied in an flash drive.
An bootable iDeneb image is created now. You can now boot your laptop with the usb drive to get Mac OS X Installation menu. This was the just the primary part where we were creating a bootable media to run Mac OS X. Connect your usb and boot from usb. You can make those changes in the BIOS or choose the appropriate boot menu. Now you can being your Mac Installation.

Creating iDeneb Mac OS X Bootable DVD on MAC

The above process was for using an usb drive and installing Mac OS X. But you can also do the same by using an DVD. Some of use surely need this.
The start process is similar where you have to Run Disk Utility. When you are on Disk Utility then choose the iDeneb image file and click on Burn button. You have to now connect an usb dvd drive with an blank dvd. Now restart your HP Mini laptop and choose USB DVD as the boot media. Here you will also need some usb drivers and some black cd to burn necessary file. Keep a copy of all those files which I had mentioned on the start of guide on disc or usb.

Reply With Quote
#2
Old 15-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Mac OS X iDeneb Installation Guide for HP Mini
WINDOWS PC

This is an separate method for those who are working on Windows. You can also create an bootable iDeneb disc on Windows. But the process is bit different. So have a proper look below. On Windows the process can be a bit frustrating. So it recommended that you must have both a usb drive and a usb dvd drive. Whichever work can be your choice. As an alternative if one process fails on once you can use another media for the same.

Pre-Requirements :

16GB or higher Free space
Hp Mini 110 Series Bios version should be 5.0 or higher
Pre-Requirement
USB Drive not less than 8GB. An USB DVD Drive for additional support
HP USB Boot Utility
HP Mini files which are mentioned in Pre-Requirement of Mac OS X Setup

Creating iDeneb Bootable USB Drive on Windows

We begin by using a USB drive for this process. I found this really very easy comparing the same with an DVD drive.

First format your usb drive to FAT32 format. This can simply be done by right clicking on it and selecting Format. Remember that under File System there must be FAT32.
Now you will need a tool that can make the usb drive bootable. One of which I know is HP Boot Media. There are some boot files which much present in the drive so that Windows system can boot from drive. You can use HP Boot media to format and create a bootable usb dive.
When you are done with that you will need to download an program called Leopard hd install helper v0.3. This tool is needed to burn the the iDeneb ISO on usb media. It is an very light tool that you can download from web. Download the file. The link which I had given you of 4shared to download Kexts file also includes this software. But the setup is bit tricky as the software is non-english. But no need to worry for the same. Read my steps below carefully before proceeding.

How to use Leopard hd install helper v0.3 (also knows as ddmac)

Because this tool is non –English it is really tough to figure out how to use this. You can take an print of below steps which defines each column of this tool :

As you had already downloaded the above linked folder extract the files on desktop. In than run ddma

Boot Windows XP from Compact Flash Card

2012-02-05T08:33:00.002-08:00

Using basically two applications for this adventurous process. First thing essential for this adventure to happen is XP Lite from the Lite PC.com, one of the best systematic utilities that will help you remove data and information from the Windows OS. The other best utility to be preferred is Partition Magic, which makes it easy to compress and copy one hard drive to another and vice-versa. There are several utilities as well as software that can be used for such kind of tasks, but I will prefer Partition Magic because it is much more simpler and dependable.

Step 1 - Develop an operating system using a hard drive:

Your operating system i.e Windows XP will be requiring 1.5Gigs of hard drive memory, so the initial step is to create the system using a typical standard hard drive.
Try to Create a partition of 2 Gigs, but it is not possible to install windows xp service pack 2 at this stage, so put the Operating system on a 3 Gigs or bigger drive for proceeding in a successive manner .
After the above step, Install a new copy of the Operating system using NTFS file system since it has option of minimizing the file contents which is to be used by the user at later stages.
Make the addition through drivers and wait for appropriate time so that Windows Update will install and place latest patches.
make an Installation of Beyond TV Link and the Firefly Remote software.
Try to keep a track or a record that the above procedures are been followed in an appropriate manner and they are functioning properly.
Right now at this stage it is not so possible or preferable to back up everything using any tool like Partition Magic.
In case you want to roll back to this stage; follow the below given steps with at most care:

Step 2 - Try to turn off Virtual Memory:

Initially you should turn off virtual memory so it does not create a paging file on the drive. This can be applied by right clicking My Computer and selecting Properties. It’s below the Advanced Tab, insert into another dialog by selecting the Settings button below Performance.
From there, it’s below yet another Advanced tab and it’s labeled Virtual Memory .
Make sure that when you select No paging file you hit the Set button or it will not adjust the settings.

Step 3 - Develop XP Lite from Lite PC:

The next step is switching back the OS using XP Lite from Lite PC.
Here you should do is disable Windows File Protection in the option named Window File Protection tab .
If you are not able to, then you’ll find windows constantly complaining about missing files.
Then remove most components including those Advanced Components you can get to show up by changing the default settings .
since you’ll likely remove the System Restore feature which gobbles up a lot of space, but prevents you from doing something completely irreversible.
Make sure you reboot a couple times afterwards to remove any system restore points.

Reply With Quote
#2
Old 21-01-2009
absolute55's Avatar
absolute55 absolute55 is offline
Member

Join Date: Nov 2005
Posts: 1,238
re: Boot Windows XP from Compact Flash Card
Step 4 - Perform Clean up activity:

The next step to follow is to boot into Windows Safe Mode to do some basic clean up of the system.
make it a confirm to change file explorer to show hidden and system files. This can be found in the Folder Options menu in the View tab.

There may be some difference in system but here are a few good things to remove or change to get more disk space:

Delete anything in the Windows directory that starts with NT Uninstall.
Delete anything in the Windows/Software Distribution/Download directory.
On larger directories, go to the properties dialog and select the Advanced button and go for compress contents to save disk space. Note that this will be only available if you format your drive using NTFS.

Try doing this to the following folders: Program Files, Windows/Microsoft.NET, Windows/.inf, Windows/system32.
Doing just that, the system down to 750MB or so.

Step 5 - Perform Resize and Copy:

Run floppy boot disks for Partition Magic to resize and move the OS to the compact flash card.
Make sure you compress the hard drive partition small enough to fit the compact flash card, and then from wi

How to Root Micromax Andro A60 Android Phone

2012-02-05T08:33:00.000-08:00

How to Root Micromax Andro A60 Android Phone

All android phones can be rooted. What does rooting mean? Rooting means gaining full access rights on the android device which is otherwise not possible. As an android users, you have limited rights on your device and you cannot take full advantage of your android phones capability. Rooting process gives you the super user permissions which is otherwise impossible. Super User rights means administrator rights. As android is based on linux kernel, su command is used to give you root permissions on your phone which is similar on linux.

To know why you should root your android device click here.

Rooting isn't a long process as it used to be when android had just entered. In this process we will not use the adb shell or any other complex programming, but will make use of an application.

What you need :

An Android Phone to Root - I am using Micromax Andro A60
Universal AndRoot 1.6.2 beta 5 Application for Android
A computer if you will download the file on your computer
And thats it..!

Download AndRoot 1.6.2 beta 5 from here.

Connect your Android Phone to the computer using the USB data cable provided with the phone.

Open the notifications on your android phone. This can be done by dragging down the top indicator bar down.
There it will show USB cable connected, click to mount USB Mass Storage Device.
Click on it and then a new dialog box will appear. Click on Mount on that window, this will mount the USB storage on the computer.
Now you can use the SD card as a USB storage device on the computer.
Now copy the downloaded application file to your memory card.
Again on the phone open notifications and click on the same notification which says USB cable connected.
Now click on the Turn Off button to safely remove the USB mass storage.
Now open any file browser on your Android phone and explore the memory card to navigate the file you have copied.
Open it and the Android Application Installer will start and install Universal AndRoot.
Click on yes on all prompts during installation.
It will also install Super-User Application which will manage system permissions on your android device.
Once it is done, reboot your android device.

Reply With Quote
#2
Old 05-02-2011
Patio Patio is offline
Member

Join Date: Jan 2009
Posts: 289
Re: How to Root Micromax Andro A60 Android Phone
Nice guide. Well as far as i knew it was not possible to root this micromax android device nor does it supports update. Well if you have rooted the device, you might like to come up with a process of upgrading. Be it an unofficial way
Reply With Quote
#3
Old 24-04-2011
sangram.kar sangram.kar is offline
Member

Join Date: Apr 2011
Posts: 1
Re: How to Root Micromax Andro A60 Android Phone
hi rudra, quite impressed with your topic, but it'll be better if you post a video on youtube showing us how to. And please do it with a60 only, cause that will make it viral, as there are many a60 users in india but zero video showing rooting...
Reply With Quote
#4
Old 24-04-2011
Arzaan Arzaan is offline
Member

Join Date: Feb 2009
Posts: 225
Re: How to Root Micromax Andro A60 Android Phone
It seems Rudra is not online since long time, i can't see his latest posts. Anyways, i tried to find out videos related to rooting Andro A60 but no success. Hope any expert can make his own video for the same and upload on youtube or anywhere else.
Reply With Quote
#5
Old 09-07-2011
maney maney is offline
Member

Join Date: Jul 2011
Posts: 1
Re: How to Root Micromax Andro A60 Android Phone
brother i am also using the same phone micromax andro a60 i used your application i downloaded it and installed it and then i rooted my phone after it gotted root in my menu a icon appeared from the name of superuser permission. what is it does that shows that my phone is rooted now. and can u pls tell which is the besat for our phone
Reply With Quote
#6
Old 09-07-2011
Bon-Z's Avatar
Bon-Z Bon-Z is offline
Member

Join Date: Jan 2006
Posts: 4,390
Re: How to Root Micromax Andro A60 Android Phone
Quote:
Originally Posted by maney View Post
brother i am also using the same phone micromax andro a60 i used your application i downloaded it and installed it and then i rooted my phone after it gotted root in my menu a icon appeared from the name of superuser permission. what is it does that shows that my phone is rooted now. and can u pls tell which is the besat for our phone
What do you mean by "besat for our phone"?? I cant understand what excatly are you asking? Can you please try to specify your issues in proper details? Well, if you have rooted the phone then you can easily try to boost its performance, tether over Wi-Fi or Bluetooth and many more things, with full rights.
__________________
In The Absence Of Light
Darkness Prevail's
Reply With Quote
#7
Old 16-08-2011
shows shows is offline
Member

Join Date: Aug 2011
Posts: 8
smile Re: How to Root Micromax Andro A60 Android Phone
I would really appreciate if u cud pls upload a video on youtube
Reply With Quote
#8
Old 16-08-2011
Joshe Joshe is offline
Member

Join Date: Jul 2009
Posts: 977
Re: How to Root Micromax Andro A60 Android Phone
I found some simple steps that can help you out for the rooting the phone. For that you will need Universal Androot App. This app provides you one click process to root your Android phones. You can use this root explorer in your device to root your phone with other working os. There is an root explorer in the phone which can also help you to manage other rooting process.
Reply With Quote
#9
Old 16-08-2011
shows shows is offline
Member

Join Date: Aug 2011
Posts: 8
unsure Re: How to Root Micromax Andro A60 Android Phone
Ehmmm i was jst thinking is ther any disadvantages of rooting your mobile
and pls can anyone list me its advantages and disadvantages
Reply With Quote
#10
Old 17-08-2011
Maq.H's Avatar
Maq.H Maq.H is offline
Member

Join Date: May 2009
Posts: 1,267
Re: How to Root Micromax Andro A60 Android Phone
Quote:
Originally Posted by shows View Post
Ehmmm i was jst thinking is ther any disadvantages of rooting your mobile
and pls can anyone list me its advantages and disadvantages
Mobile Rooting is a kind of Unlocking or so. It is a device hack that allows you unrestricted access to the entire file system of their mobile devices. You can see it here also:
Quote:
Originally Posted by Kickapoo View Post
There are many of the carriers where they lock the handset to deject customers as of taking their handset as well as moving to an additional carrier. Carriers as well depend on "exclusivity" accord to support users to change to their plans therefore they can exercise a exacting handset for example Apple's iPhone with the AT&T network. To utilize the handset on an additional carrier's network it would be essential to "unlock" your handset. This is completed through a code founded on the IMEI of the handset which can be given by the carrier otherwise firms on internet which are somewhat more reliable.
Reply With Quote
#11
Old 17-08-2011
shows shows is offline
Member

Join Date: Aug 2011
Posts: 8
How to Root Micromax Andro A60 Android Phone
is it possible to upgrade micromax a60 to 2.2??? and how can i view arabic text messages in andro a60 it shows boxes

How i can veiw arabic text massages in andro a60 in my inbox and also in browsers?? Pls help
Reply With Quote
#12
Old 17-08-2011
Pugsly's Avatar
Pugsly Pugsly is offline
Member

Xenoblade Chronicles Wii Walkthrough, Tips and Cheats

2012-02-05T08:32:00.002-08:00

Xenoblade plays heavily on the group and its cohesion from the combat system via sociogram and gems. In addition to auto-attack, each hero has a whole range of arts (technical) that are unlocked as you go. You can give them a maximum of eight. Once used, it must wait until the technique is charging. Each attack slowly fills the combo gauge. When it is full, you can trigger a devastating combo. Plus your characters love each other and more chance you have that combo and last a long time and do more damage. Moreover, given the power to Monado prescience. In a stylish black and white slow motion, you have an overview of the fatal attack is being prepared against one of the group. You then have ten seconds to alert a character and counter the attack. It is recommended to unbalance the monster and knock him out.

Xenoblade incorporates a system for creating gems. These gems can be placed on your weapons or armor pieces and you give bonuses. Two characters are required to create. It goes without saying that its better they get along wonderfully, if you want to create powerful gem. Each crystal gem has a percentage of purity, in order to add crystals to increase the equivalent purity. When you reach 100%, a gem of an equivalent level is created, but when you reach 200%, you get a gem level. A 300%, you get two top-level gems.

Xenoblade poured into the traditional RPG while building on the MMORPG. Unleash the monsters always a plethora of items you can choose to pick or not that is reminiscent of "bashing" and "loot." Some testers believe that the inventory of the game is too small but that is wrong. As a MMORPG, think to sell the items regularly. For each piece of armor, you have five pages of inventory and each one can hold thirty objects, while for materials and other gems, its ten pages! In this school year, they let you review your multiplication tables. On our part, it only happened once the inventory is full.

As in the action-RPG, there is no separation between exploration and combat. If you see a hostile enemy it will attack you immediately. Your characters will automatically attack the enemy you have selected. Moreover, customization of your characters is quite extensive. Each change is visible piece of armor in the game and in cut scenes, which is always nice.

Game Plot :

Thousands of years ago two titans have emerged in the middle of a vast ocean. Bion and Mekons have fought to exhaustion. They are now the world for two peoples at war: Homz live on Bion and the Mekons on. The legendary sword Monado is the only way to destroy the Mekons and is for Homz, their only hope of resisting the attacks of their enemies. The story begins when the colony is attacked six, one year after the Battle of the Valley of the sword. Dunban, who mastered Monado, is too low and it Shulke who decides to take over. The attack is deadly. Once rejected, Shulke, equipped Monado, Reyn decides to go with his best friend to avenge the colony and destroy the Mekons 6. His journey is going to get him to return to the valley of the sword. And to do that, it will therefore have to climb to the top of Bion, which will not be easy.

Rest assured, if the scenario may seem simple, it is only the introduction. It is actually far more complex and the history of Monado holds lots of surprises. Shulke will discover through his journey to revenge the real world and the forces that coexist. The scenario is a little time to set up but managed to keep us in suspense until the end.

WORLDS

Prologue : An almighty crash heralded the sudden arrival of the Bionis and the Mechonis to this world, for the two titans were locked in a timeless battle. The sound of their clashing blades rang out, shaking the sea bed and sending ripples through the air. As the duel reached its climax, the titans poured their remaining strength into one last slash of their great swords. Both struck forth with immeasurable power. Once the dust had settled, only their corpses remained.

Children of Bionis : Eons passed, and signs of life finally began appearing upon the corpse of the titan Bionis. People born of the Bionis will return to the Bionis. Now, the Bionis's enormous body, covered in lush plains as far as the eye can see, is home to a developed civilization, which gives thanks to the titan for providing them with such a natural bounty.

The Mechon : Life on Bionis was not destined to flourish forever, however. One day, an enormous horde of mechanical life forms from the titan Mechonis launch a sudden and all-out attack on the inhabitants of Bionis. These overwhelmingly powerful entities, known only as the 'Mechon', overwhelm and devour the inhabitants. Before long, the entire surface of Bionis was overrun.

The Monado : The Homs' only remaining hope is a legendary sword, said to be a gift from the titan itself. Its blade is imbued with a curious power that allows it to effortlessly slice through Mechon armor. Unfortunately, whosoever wields the sword must endure a great toll on their body, and only one has ever been able to wield it: Dunban, Hero of the Homs.

CHARACTERS

Shulk : A handsome young man and a budding scientist. He and Reyn set out to destroy the Mechon that attacked their home colony.
Fiora : A caring and energetic young woman. Fiora is a childhood friend of Shulk's, and feels certain affection towards him. She is Dunban's younger sister.

Dunban : Hero of the Homs, who once felled countless Mechon with the Monado. Currently recuperating from injuries received in the battle fought one year ago.

Reyn : A member of the Colony 9 Defense Force and Shulk's childhood friend. Optimistic and hard-working, though sometimes hot-headed and overly emotional.

Sharla : A medic in the Colony 6 Defence Force. A no-nonsense woman with a real inner fortitude, she is an excellent sharpshooter.

Melia : A young member of the High Entia race that have built a vast civilization on the head of Bionis. She specializes in using ether attacks.

Riki : A member of the Nopon village tucked away in the forest on the Bionis’s back, he is also their Heropon! He acts and speaks just like a child, but therein lies a secret.
Reply With Quote
#2
Old 18-09-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: Xenoblade Chronicles Wii Walkthrough, Tips and Cheats
TIPS AND HINTS

Monado-Smash : The monado-smash is a very powerful skill. Here you should invest many skill points, because it allows you to knock on a high level and serious opponents.

Quest Bag : It is typical for Xenoblade Chronicles that your bag is very full very quickly. Now the question arises, what items you can safely throw away and what you should keep better. Around this dilemma a little narrow, in an area you should first do all the quests before you go into a new and accepting new there. So that you handle the problem that you've actually thrown away quest items needed for the benefit of new things. The vast majority of quest items are always needed for this one quest. It is extremely rare that you need the same item even for a different task. So if you have excess quest items in your backpack, then you can delete a rule, so that you have more space for new and interesting things.

Jewels forge : You should save before this method. Especially if you use rare materials. Forging is an art in itself. Even and especially in Xenoblade Chronicles. If you want here Jewels forge high level, and it will help the following method. First, you need to produce cylinders with a relatively high degree of purity. You can select here jewels and cylinders with different effects and a relatively low purity, until you have three effects in the oven. Once you have confirmed your selection, you choose from a launcher and Sharla Shulk as a technician and begin to forge. In this way the purity level is rising only slowly. However, it should repeat this until you've cylinder with a purity of just under 100%.

Now you can choose two of these, which have the same effect and uses them as materials. So that the purity increases to almost 200%. Next you Reyn befall Dunban as throwers and act as a technician (or vice versa) and the desired effect, almost every state and the heat so that the next higher level. In this way you can later forge Level VI Jewels.

Shulk : Shulk is indeed a pretty good fighter, but it cannot heal that great. If you fight with Sharla, you can use their healing abilities and better targeted, since the AI uses them hardly. That should help in some heavy fighting.

Reyn : Reyn it should be the tank. Shulk must quickly fill his blue bar, so that the opponent is knocked down by a chain attack. In addition, its rich healing that you can cope without a healer should Sharla. The special attack of the toad she fends off with the Monadoschild. We also recommend that the blue bar beforehand with a lighter opponent to fill, so you can be taken the turtle at the beginning of a chain attack. After you have won the fight, you can easily report to the checkpoint and start the fight again. In this way you at least you can level up to level 37 quite easily.

Re-Spawn : Since you often at Xenoblade Chronicles gets the order to kill many monsters are too powerful, it happens that all of her quest enemies you killed, but still needs a few kills and now must wait until the required residual respawn. This waiting time you can handle, in which ye simply be teleported to the nearest checkpoint. This means that all enemies respawn in a zone, except the special enemies and you can immediately begin the massacre.

Fast Money : The blue balls, which you can find it anywhere, can sell well. Of course, you should register it before, but with this method, you can quickly make a lot of money and can afford fancy armor and other things.
Level Up : The first really good place for leveling is the "bone of Bionis". You should, however, this minute. Level 28 have, have good equipment and the monado chill at level 3 or have a better fourth Your journey to teleport point, which is just north of the camp. Now it runs a bit to the right. There you're not seeing a large turtle. With its demise very much EXP you get. In addition, they can really drop good equipment. The fight is worthwhile.

Reply With Quote
#3
Old 18-09-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: Xenoblade Chronicles Wii Walkthrough, Tips and Cheats
WALKTHROUGH

Prologue :

After the introduction about the history of the two titans, will start the prologue. In the prologue, the army attempted a human-like robot "Mechons" to put them to flight. You can only briefly in the role of "Dunban" slip on and off a few enemies during which you are the first elements of the control of the fight and taught.

Chapter 1 –

A). Mechon-junkyard

After the prologue, you start at the same place, where has been the battle raged with the Mechons, but a year later. Now your slips, the role of the young "Shulks", which seeks in the ruins of the robot for parts for his equipment. During the search, you stumbled upon a hermit-cancer that has selected a piece of armor as a home. Your friend, "Reyn" comes to you and will help you in battle. Now begins a more comprehensive tutorial that you should study well, because the control needs a little practice at the beginning.

If the beat cancer, you must have a worm attack, because it ensures that you cannot leave the green force field. Now it gets the job to a marker on the map to go. Simply use the arrow at the top of the screen, because this gives you direction and distance of a target. Should all move to attack her opponent, that you may have gathered some experience.

B). Colony 9

In the colony itself is your companion goodbye for now, because he needs to train her and apparently belongs to a weapons laboratory. You start at the colony 9: main gate. Is now over by the business district of ether and the jewel lantern uncle and cross the big bridge to the central square. Here we go north over another bridge to the troops in, here a sequence is triggered, which shows you as the commander of troops a few soldiers folds. Troops in their quarters must now turn left into the research laboratory. Follow the hallway until you eventually triggers a new sequence. In the sequence you meet Dickson back from the prologue and talk to him about the sword "monado", which is also present. Plus, there is Dunban and how he is one year after the attack.

i). Food for Shulk : After the sequence you get the mission "food for Shulk", where there is a "missionary activity", which means you have to do it for the plot, because otherwise it gets no further. For the first mission you must go back to Central Square or fast travel, then it goes this time over the southern bridge. You'll land in a residential area and it must leave via the western bridge. Now you should stand in front of a grand staircase, she goes all the way up. Arrived on the lookout hill, a sequence is triggered and you learn more about the back story.

ii). Back to the research laboratory : Together with Shulk you must now go back to the research laboratory, uses the best re-Fast Travel. In the research lab once a sequence is triggered. Reyn takes the monado your friend in the hand and turned it on, but he cannot control i

How to Setup best Backup System

2012-02-05T08:32:00.000-08:00

Backup and Data Recovery are two different concepts. Data Recovery always comes after when your system fails to have a Good Backup System. It is very essential for everyone. We mostly realize this when we accidently loose our data. That can be due to hardware failure, software failure, virus, etc. But there is nothing you can do for theft or lost of your system. In that case some online backup system can only help. I had mentioned mostly that stuff here which is related to your personal computer. It does not matter most if it is a Desktop or Laptop. We carry some of our important files in our desktop. Time has gone when people use to carry a different file with sheets of papers attached inside for every work. That has become virtual. With the help of operating systems like Windows, Mac or Linux we are enough capable to process our documents easily and share the same in some seconds. But what about the Backup part. Once you are done with the document you do not delete that. You keep in safe for future record. Bigger enterprise can pay a higher amount for backup services. They get dedicated hardware/software support for that, which is not possible for every individual.

I had tried my best to provide you from most basic, to most advance backup system that everyone can afford. If you want you can pay for a license software or else there are open source alternative also. Open Source are those software’s which are available for free usage under a public license. They are developed and tested by independent developers which is widely called as open source community. You can too be a part of the same. They are more reliable than using a pirated copy of any software. Before beginning there are some common doubts. Does everyone really concern to backup their files. It does not matter if they are your photos or emails. Not really. Because many of use never face that issue. Many of us carry portable gadgets like an mobile phone, usb drive, etc which an better place for storing your file. But if in future you lost it, or it is damaged, you lose everything. Backup is an habit of securing your files. This habit does not only help you at your home, but also at your office. I have seen many, they even keep safe papers which are not use. They use pencil to mark certain important terms in that. That is an habit. There are many advance and basic tools you can use for this purpose.

Windows is an widely used operating system. Along with them Mac and Linux too has its own region. Each of them has an automated backup program in them. This runs via Wizard and guides you for the process. So half of you job in done in that place. Other than this you can also schedule your backup by assigning date and time. The system automatically runs that process without your interference. So not need to worry about regular backups. I had posted the most common question which arises in mind first for backup. You can make a list of the same and fill them up as per your need.

Why to Backup files ?
What to Backup ?
How to use Backup System?
What can be the frequency of Backup?
Is there a need for additional storage place for Backup?
What are some Specialized Backup Tools ?
Online Backup Service ?

Reply With Quote
#2
Old 19-09-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Setup best Backup System
Why to Backup ?

There is no special thing invented to prevent an failure of hard disk. It is an electronic device, made of many tiny mechanical parts. They are very delicate and build with special machine and technology. They get disrupted easily with overflowed current, shock, moisture, etc. You cannot even preserve it. So better to use another media that can help you to get an copy of your data. There are specialized tools design like Raid support which works both on the hardware and software level and keep a copy of your data. Raid support can be easily found on laptops, they just a bit more costly than regular models. But much better. The question is really useless here to ask why to backup your data.

It is an important part which is ignored mostly. There is also an issue where you cannot backup your large media and games files. For example taking a backup of 60GB videos is really not possible on a pen drive or DVD only if they are important. Backup too cost. Here you might need to pay for some software or hardware whatever is needed. For this the most basic tool on Windows, which is called as Backup and Restore can be used. The tool is automated with time and date settings. You can set it on daily or weekly backup as per your need.

How to Backup

Below are some steps for this purpose. I had mentioned some of the most common backup techniques for different operating system below. They come with operating system itself, so you do not need to download or buy any other third party program. These tools below are simple to use. You can configure them for your files and keep a backup of files in different partition. The partition can also be locked/hidden by using tools like Bitlocker so that no one can access your valuable data. I will recommend everyone to use this tool for start. As your needs for backup will increase, then surely you can choose a much a better program.

The below program does not need any specialized hardware or software support. Even laymen with small guide can understand the process. The most important thing needed here is to understand the location of backup. I prefer to use 2 different hard drives in the same system. The first one runs the operating system and the second has all my files. I had given the location as separate partition and it is untouched. All partitions of that secondary drive are hidden with software. The backup program can see them. If the backup is not more than 4GB, then you can use a Rewritable DVD to burn it on a disc. I had advice for re-writable DVD because you can overwrite the files again and again on it for number of time.

Windows Backup & Restore Service :

Call of Juarez: The Cartel Walkthrough, Tips and Cheats

2012-02-05T08:31:00.002-08:00

Call of Juarez: The Cartel is an fps video game. The Cartel is a new series from Call of Juarez edition. There are many older series which were widely played and liked by gamers. This is another new version for Call of Jaurez fan. I had mentioned many information related to the gameplot, game character and locations as mentioned on the official website. This will give you an clear idea of what is new in Call of Juarez: The Cartel. Call of Juarez: The cartel takes effect well-known series of shooters about the Wild West in our days, while maintaining the atmosphere and the dynamics of interactive westerns. The story begins with a bang, arranged by members of the cartel in the Ministry of Justice. Exploded a bomb claimed the lives of hundreds of people, but this is only the beginning.

The government concludes that the members of the criminal organization are likely to have infiltrated government agencies. The only chance to stop the mafia - to collect special detachment of the loyal people. The choice falls on Kim Evans, an FBI agent who grew up on the streets of criminals, Eddie Guerra, an employee of the Office of Narcotics, gambling, carried away, and Ben McCall, a descendant of the hero of the original game by Ray McCall. Call of Juarez - The Cartel puts its focus on cooperative gameplay. With many elements quickly becomes clear: That makes ten times more fun with friends than with computer-colleagues. For example, mutual help. A player takes too much damage, he falls down. He is then held immobile until he helps a colleague back on its feet. There was in similar form in zombie shooter Left 4 Dead 2 .

Game Plot :

When a Mexican drug cartel bombs a US law enforcement agency, a US task force begins a blood-soaked quest for justice. Play as Ben McCall, a brutal LAPD cop and descendant of Ray McCall; Eddie Guerra, a DEA agent with a chronic gambling habit; or Kim Evans, a gang-affiliated street kid turned FBI agent. Who you choose determines how the unforgettable story unfolds. As you fight to dismantle the Cartel and unravel the mystery of the bombing, you’ll embark on an epic, bloody road trip from the streets of Los Angeles to Ciudad Juarez. Experience the lawlessness of today’s Wild West as you hunt down the Cartel before the violence escalates north of the border.

Features :

Gripping, cinematic story with unforgettable characters.
Play through the entire campaign with two friends online in three-player cooperative mode.
Huge selection of weapons, including pistols, machine guns, sniper rifles, anti-air weapons and more.
Wide variety of maps and missions, including raids, witness protection, interrogation, undercover missions, shooting in a crowd, car chases and more.
Addictive multiplayer modes, including an unrevealed new mode, as well as classic modes like Team Death Match. As you play, your character will evolve, unlocking weapons and gear.

Game Characters :

Ben McCall : A 30-year veteran. Two-time winner of the Medal of Valor. One serious badass. Ben McCall is a tough, hard-nosed detective who isn’t intimated by anyone. He has a score to settle with the Mendoza Cartel and wouldn’t mind an opportunity to exact some sweet revenge. McCall often has good intentions of upholding the law… but doesn’t mind crossing a moral boundary or two in the name of justice.

Eddie Guerra : After growing up on the streets of East LA and serving his country in Iraq, Eddie Guerra has established himself as one of the top DEA agents in the country. A smooth talker, ladies’ man, and renowned gambler, Guerra is a risk taker in all aspects of his life. He has no qualms about taking out bad guys and lives by the motto "the end justifies the means."

Kim Evans : Kim Evans is no stranger to violence after growing up in the ghettos of South Central LA and experiencing the gang-related deaths of her two older brothers. She worked her way out of poverty, first earning a full-ride scholarship to college and then landing a coveted spot in a new training program with the FBI. She is an intelligent, street-savvy agent who knows how to get the job done. Ruthless with a rifle, she demands respect from her partners and will stop at nothing to bring the Cartel leaders to their knees.

Game Locations :

Hunt down the Cartel and experience the lawlessness of the modern Wild West as you journey from Los Angeles to Juarez. The areas you’ll encounter may lack a touch of hospitality, but don’t worry about overstaying your welcome – you’ll be six feet under in the blink of an eye if you can’t find a way to survive. Your trip will take some deadly twists and turns, but some of the stops along the way will include:
Sequoia National Park: This forest plays host to some pretty interesting crops, but you may not want to meet the local farmers.

Los Angeles: A lot of inhabitants know it as the city where dreams go to die. Sometimes, they just need a little push.

Candy Store Gentleman’s Club: The workers at this club would never judge a man by the size of his pistol, but the guards are a lot pickier.

Panorama Night Club: It draws in the crowds with cheap, watered down drinks and ear shattering music, but even the gaudy flashing lights can’t hide the layer of filth that coats the club’s owners.

The Port of Los Angeles: Almost anything you’d crave moves through these docks on a daily basis, no matter how twisted your appetites.

East Los Angeles: This area is home to over three dozen active street gangs, which means it takes a lot of balls – even for a cop – to go poking around looking for trouble. Badges aren’t bulletproof.

Interstate 10: This broiling desert highway is the perfect route for smuggling just about anything...or anyone.

The Grand Canyon: It’s over a mile deep in spots, and if the fall doesn’t kill you, a couple dozen heavily armed merc’s might help.

White Sands, New Mexico: It used to be a nuclear test site for the US government, and it’s still a good spot to try out more conventional weapons. Live targets optional.

The Sonoran Desert: This is the perfect place to cross the US-Mexico border, if you don’t mind arriving in a body bag.

Chihuahuan Desert: It might have a cute name, but if you find yourself wandering through it in the midday sun, a gunshot to the stomach would be the least of your problems.

Ciudad Juarez: The Mexican cartels use it as a main hub for controlling every dark vice moving north and south across the border. The city attracts people looking for drugs, guns, prostitution…and even revenge.
Reply With Quote
#2
Old 20-09-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
Re: Call of Juarez: The Cartel Walkthrough, Tips and Cheats
Walkthrough

Chapter 1

You watch out of the window and shoot at the Vans all shooting at you. After the cut scene you can you now take the figure of your choice and off you go. Driving down the street and follow the waypoints until a cut scene occurs. Now completed the first opponent after another cut scene and get a few more enemies. Proceeds slowly and make them absolutely no threat to enemy then dive behind rocks and bushes, so seek out a nice cover behind a tree and settled into silence all opponents from a distance. In the tent to wait 3 more enemies, you done and blow up the tents. Then it goes back to the car. Once you shot at will you can you hide behind one of the many trees and off the enemies one by one. Once you are rid of her ride in a car, your colleagues, then take care of the enemy. Once you arrive it gets out and runs along the River. You just shoot from tree to tree leaves, cover and done, one by the. Arriving at the last house is a team action. Here you kick a door and done in slow motion with the gun opponents.

Take the M60 right now of you shoots and thus destroy the incoming helicopter. Shoot, hide behind the pillars and shooting. Keep up the good and the helicopter does not by long.

Chapter 2

Head up to the house. Now you must defeat your opponent with fists. A children's game. We searched the house after a few secret items. Then runs after the cut scene outside and follow your comrades in the alley. From the right comes a car - shoots with everything you have on the matter. Then takes cover and shoots the remaining opponents. Now head up to the house. Now grab the opponent from different directions. One of your comrades will tell you where they are. Goes on to cover the windows and carry out all opponents. Then runs through the front door to the outside and promptly investigated cover. Your enemies have been hiding behind cars. Sprinting from cover to cover, until you can flank them from the left. So they are a breeze. Then it goes on in the car - simply drive in again and again to the specified points.

Chapter 3

Walk into the strip club and talk with all the strippers as they are marked. Then continues up the stairs. Done again with punches to the bouncer and goes to the prostitutes. Speak there with Tina and it goes even further upwards. Come near thee, and door handles all opponents during the slow motion. Goes on and stormed the brothel. In the narrow corridors can keep up her simply to be nothing more moves. Downstairs in the club uses it’s done so all your concentration and opponents. Get out now and you will be shot on the street. Is careful to cover your back and completed one after the other. Now it goes by car from the car, continued from cover to cover. Try to flank your enemies and use the workshops to work around it so the enemy's defense breaks down quickly.

Chapter 4

Drive with your car through the port. The few opponents are no real threat. Once you get to the gate, get out, do the opponent makes the gate and continue. Now go left and keep you covered. Run cover to cover and flanking your opponent. So they are no danger for you. Ballert you the way to the warehouse. Always goes for cover. In the warehouse more opponents waiting for you. Regularly used the slow motion mode, in order not to die. Then it goes back out into the fresh air where a sniper is waiting for you. But you can overcome the relatively easily. On the way to the next warehouse you confront many enemies. Works best on you from cover to cover. In the next warehouse you attack some enemies from above. Watch it on! Shoots you through the warehouse - you can barely run it. Watch for it to take cover and use the slow motion as soon as possible.

Chapter 5

Going to drive the car speed. Stormed into the parking lot and shoots at the car just behind where the gangsters to hide in. The explosion you kill the enemy quickly and can advance further. Power continues to wait on you, your people rises quickly into the car and drive off. Pay no attention to the shots but you focused on healing to get through the traffic. After a cut scene you go directly to the van and shoot all the enemies just stand there in the room closest to each other. Now go to the next destination and after another cut scene you take a bag of money and now go from cover to cover. Let her fall when fired will be the money, does the opponent take the money and walk on. Is best left to car by car, if you carry the money you can try the gun off a few enemies. Should you die, then almost throw away the money that goes into a cover and upload to. Keep it up briefly to her car in front are. When it gets quite narrow your focus mode it uses and thus handles the opponents come at you next stop. Once you're in the car let her go, watch it back on the opponent and drive the way points from easy. Chapter successfully passed.

How to Install Snow Leopard on Asus G51J & Asus G51Jx Laptop

2012-02-05T08:31:00.000-08:00

Asus G51J & Asus G51Jx is two best selling laptops. It is an bit old model today, but there are many users who are still using it. I found some informative stuff which can allow you to convert your regular Asus laptop to an Mac PC. But there are limitations and this is only possible after doing major modification to the system. I am not talking about dual boot here. Dual boot of different operating system like Mac, Windows & Linux are more complicated. You can even Triple Boot Mac, Windows & Linux. But the process is a bit difficult and you just need the right files and drivers. Also remember the architecture of each operating system differs from each other. They also differ in the way of responding to the hardware. The reason to choose Asus G51Jx is, I found some working kext file for the same. Kext files are used by Mac operating system to control the hardware. In simple words you can assume they are drivers. And for those system which does not have kext support, Mac system can only be virtually run on them.

Asus G51Jx features Intel Core i7 processor with Intel HM55 chipset. And Asus G51J has Intel PM55 chipset. The first requirement is to get appropriate bios update for the same. Asus G51Jx is a gaming laptop, designed to give maximum performance and render better graphics. It can handle many operations of Snow Leopard. You have got pre-installed operating system in this, so it is your choice to keep or entirely format it. I prefer to keep a recovery disk ready for you. Because Snow Leopard installation not only changes the file partitions but also the file system which is unreadable in Windows. So if accidently you loose the recovery partition, it will be a lost of genuine Windows 7. So keep a backup of your operating system ready in case you do not like you can restore stuff back. Talking about Asus G51Jx, it is a nice portable gaming notebook and surely for Snow Leopard it is a nice choice. I had tested the same for some while where it performed well. But as you know many hardware support will not respond on it. Somewhere I really find trouble in fixing the same out. Equipped with Intel Core i7-720QM 1.6Ghz processor and NVIDIA GeForce GTX 260M 1GB GDDR3 memory, the laptop is correct choice for this purpose.

Note: Some of Mac updates modify the system bios. If did not performed correctly can cause permanent system failure. Collect all appropriate resources before doing this and then only make changes. Entire modification to the operating system hardware is on your own risk.

There are some guides which might interest you. This guides are base don install similar Mac operating system on different non-Apple hardware. You can go through the below guides before reading my below steps just to find out how this entire stuff works. I had also linked a triple boot guide in the first paragraph for those who are interesting in installing on 3 operating system on a single pc.

1. Mac OS X iDeneb Installation Guide for HP Mini
2. How to install Snow Leopard on Gigabyte GA-E7AUM-DS2H
Reply With Quote
#2
Old 21-09-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
Re: How to Install Snow Leopard on Asus G51J & Asus G51Jx Laptop
Install Snow Leopard on Asus G51Jx

Pre-Requirements on Install Snow Leopard on Asus G51Jx :

Pre-Requirements are necessary to read before running up the setup. This are those needed files which are important to collect on usb/cd drive and needed at the time of running setup. I am really a fan of Apple operating system, but like Windows or Linux they are not so friendly with every hardware. There are some requirements and hacks that are needed to be performed before installing them. If you need all the requirements then your half job is done. The only things that remain pending is setup.
Snow Leopard Retail DVD : You can buy an Snow Leopard Retail DVD from Apple Store. It will cost you $29 which is really not bad for such an nice operating system.

Storage Space : You need enough storage space to run Snow Leopard. I prefer to install the same on my secondary hard drive. You can also create an additional partition only for Snow Leopard. Remember that I am not writing the methods of Dual Boot. It is like completely formatting and installing new operating system. You will need to prepare partition which is readable by Mac Operating system. You can use Disk Utility for that. In the above guides I had explained that method in detail. You can use any bootable disk like EFI for the same or use any working Mac system to format your drives.

EFI Boot Disk : EFI boot disk is the most common and easiest way to install Mac OS X. It is an bootable disc which aims to run the setup of Snow Leopard. You can download this from anywhere, burn that on a disk and boot the system. When you boot, you have to remove this disc and insert Snow Leopard disk to initiate the setup. This disk also contains disk utility support which can be used to create Mac partitions.

Mac OS X 10.6.2 Combo Update : This update is very important once when you are done with the setup of Snow Leopard. It gives more stability to your system and may bugs are fixed here. I will mention that in detail. The update consists of al general fixes for the operating system which directly influence the system stability, compatibility and security.

What this update would fix (As mentioned on the official site ) :

an issue that might cause your system to logout unexpectedly
a graphics distortion in Safari Top Sites
Spotlight search results not showing Exchange contacts
a problem that prevented authenticating as an administrative user
issues when using NTFS and WebDAV file servers
the reliability of menu extras
an issue with the 4-finger swipe gesture
an issue that causes Mail to quit unexpectedly when setting up an Exchange server
Address Book becoming unresponsive when editing
a problem adding images to contacts in Address Book
an issue that prevented opening files downloaded from the Internet
Safari plug-in reliability
general reliability improvements for iWork, iLife, Aperture, Final Cut Studio

Download Mac OS X 10.6.2 Combo Update

Kext Update - Nivdia & Multi GPU Support Kext: Many of you might be wondering what is this. It is an Snow Leopard Kext to fix the graphic issue. It will improve your system resolution. I had attached the same to this post. Download it and keep it ready in a usb. You will need to provide this kext file after setup. If you can found the updated version of this then much better. I got this which will help you to run Nvidia and Multiple Ati support on the single system. But as for laptop is enough strong to give you 1920x1080 resolution.

* To install Mac OS X need GUID partitions system on your hard drive. The current hard drive format used by Asus laptop and other regular system is mbr. This is the file partition container which a carries information on the partition size. Mac system cannot read mbr based drive. You need to convert the same to GUID. There a ample of guide for the same you find only to convert an regular disk to GUID partition.

Installing Snow Leopard on mbr based Hard drives :

It is possible to run Snow Leopard on mbr based drives. You do not need to entirely remove your data and format the drive to GUID. There is a separate disk provided for the same. There is some of the Mac version provided by Hackintosh community. But they are hacked version of operating system and I will recommend not going for. But if you want to just test the same then do that on your own risk.

First to run the operating system you have to create Journaled file system on your drive. This are common file system used by Linux/Mac system. And for that you have to use Disk Utility. That can be done via EFI boot disk or you can simply run the Snowloader from a usb drive.
Keep an usb drive ready for this process. You must have more sticks in additional which contain the patches and Kext file. I recommend to keep 2x8Gb usb drives with you.
Using Snowloder you can run Snow Leopard setup on mbr partition by booting from usb drive. The tool which can be used for this is called as Matsca09's SnowLoader. It is freely available on web. Stability of the operating system is not guaranteed here.

Installing Snow Leopard on Asus G51Jx Laptop

Boot the laptop from EFI boot disk. When the system is booted removes the disc and inserts your Snow Leopard Retail DVD. You can use Disk Utility to create an appropriate partition. Once you boot from EFI the detailed process for the same is mentioned on the above guides.

Quick Steps :

Boot from Efi
Remove Efi disk and insert Snow Leopard Retail DVD
Run Disk Utility to format your partition
Use the Disk Utility tool to create Journaled File system
Choose the Snow Leopard destination drive
When installation is done you have to run Kext file updates. You will need usb disk for the same.

I will recommend you to view the above two guides. Maximum process to run Snow Leopard Installation is similar. Refer to the second guide linked above : How to install Snow Leopard on Gigabyte GA-E7AUM-DS2H. There are possibilities that some of your hardware will not respond on Snow Leopard. There is hacked patched version of the entire operating system on web. But they are not legal to use. If you can find the proper kext file with bios update for the chipset you have in your system, then your work becomes much easier. Apple officially does not provide any support for such modified installation. So you need to really mostly on the independent testers you generates the kext file and share on web.
Attached Files
File Type: rar Nivdia & Multi GPU Support Kext.rar (230.1 KB, 17 views)

Gear of War 3 Xbox 360 Walkthrough, Hints and Tips

2012-02-05T08:29:00.002-08:00

One of the changes that Gears of War 3 is designed to provide the saga is that the larger of the characters combined with a thick texture, with the aim to answer all those questions left unanswered, such as what it was really the father of Marcus. To offer a greater involvement in the various events you have the ability to impersonate other characters in addition to the beloved captain of the Delta team. Gears of War 3 will be a bunch of game modes, each of which differs quite clearly from the other, to get to meet many tastes as possible. Will present in detail: the campaign, which will reveal the order of events on the planet Sera, the beast mode that puts players in command of the army of Locusts, Horde Mode that sees players work together to resist the advance of the enemy, and infinite the classical competitive multiplayer.

This new breed makes some substantial changes in its approach to fighting for its own peculiarities: octopus-like, they know much more easily broken shells of locusts in more change shape when they suffer damage to their death and explode in a roar of orange slime, to the delight of fans gore and splatter. To address this new horde of enemies, the developers have seen fit to expand the arsenal available to us with new weapons like the shotgun and a new type of incendiary grenade. Speaking of firepower, the Silverback, an exoskeleton of steel with heavy machine guns and rocket launchers, has proved very useful in situations outnumbered the enemy and in times of emergency when you have to give at least a minimum coverage to its mates.

Some Beginners Tips:

I had placed some strategy which can help both beginners and advance in the gameplay. You are ware that Gear of War 3 is an third person based shooting game. It offers an co-operative gameplay where you are engaged with many different types of enemies in an entirely different environment.
Cover Yourself: This is an best option for novice. Do not jump into the battle. Keep yourself cover behind object so that you can get some time to ready your weapon. You can also get a glimpse of location and enemies by the same strategy. Sometime even you can give an easy cover to your co-player in the game. As you are attacked you can hop to take a cover behind a wall or any ledge in the place. It is not applicable when a hoard of enemy charge towards you. One to one combat the strategy works better.

1. Core from getting noticed: This is not really for novice, but an suggestion from my side. It is an art which you will discover you keep playing the game. This strategy is best when you are playing a multiplayer game. But for this you need an proper knowledge of entire map. If you are detected you are surely the target. Sometime avoiding this give you more time to stay alive in the game.

2. Hide & Move Faster: This is for finishing up the game fast. But do not just run openly. Move faster among the object by taking cover. This is somewhat combination of above two techniques. You can surely master this by playing some levels again and again. For those who play many fps games will find this easy to perform.

3. Get back if you are in danger: When you find yourself surrounded by attackers don’t hesitate to get back. By this at least you can collect sometime for yourself and get ready for the attack back. Let your co-op player help you for the same.

4. Bombing Locust Spawn Point: This are the place from where Locust spawn in hoard towards you. They appear on the same holes. This is an bit risk job but very important if you can gain this skill. Notice the Locust spawn point and use Frag grenades to blow kill many of them at one time. The spawn point appears in between the game. You can place the bomb near the same to avoid more enemies to enter.

Gear of War 3 COG: Below is the list of soldiers of COG which are centrally played characters.

Sergeant Marcus Fenix
Dominic Santiago
Augustus Cole
Lieutenant Anya Stroud
Samantha Byrne

Chairman Richard Prescott
Hoffman
Jace Stratton
Dizzy
Baird
Clayton Carmine

Adam Fenix
Anthony Carmine

Reply With Quote
#2
Old 23-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Gear of War 3 Xbox 360 Walkthrough, Hints and Tips
Gear of War 3 Locust : Locust are your enemies.

Corsair X-Series SSDs firmware update

2012-02-05T08:29:00.000-08:00

This article includes updating the Corsair X-Series SSDs firmware, so guy who have their respective SSD’s they can follow this and updated their SSD’s firmware.

This update will enable the TRIM command contained by Windows 7 for drives with untimely firmware versions that do not currently support it. Prior to proceeding with this update, there are some EXTREMELY IMPORTANT items I would like to aware you about.

Please read the following CAREFULLY:

1. THIS UPDATE TOOL IS PRELUDE - It is incapable to pass our standard reception testing for customer utilization. And off course It is being liberated due to brawny customer insist only and exercise of this tool is supported by Corsair, but is not suggested.

2. THIS UPDATE TOOL WILL NOT WORK WITH EACH SYSTEMS- Breakdown has been practiced throughout testing on a variety of systems. If your system is not capable to update the firmware on the drive, it is strongly recommended as you should send the drive to Corsair to have it updated.

3. CONSECUTIVELY THIS UPDATE MAY CAUSE troubles WITH YOUR DRIVE - I have experienced instances on other vendors’ websites where firmware update has caused the drive to no longer be renowned by the system. In such cases, Corsair will update the drive.

4. CORSAIR WILL REVAMP OR CHANGE ANY DRIVES WHICH ARE NOT UPDATED effectively - Any drives which are not modernized effectively can be sent to Corsair for update.

(Note: that in all circumstances this will result in whole removal of the drive and a rotate time of two to four weeks, counting shipping.)

5. X-256 Owners: Firmware 1.1 ON X-256 DRIVES SUPPORTS TRIM AND DOES NOT NEED TO BE UPDATED TO HAVE TRIM SUPPORT!
Reply With Quote
#2
Old 24-09-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: Corsair X-Series SSDs firmware update
Please prolong reading underneath for information on determining if the firmware at present on your drive already supports TRIM, and instructions on how to revise your drive should you choose to do so.

Take back up your data previous to attempt to revise firmware
Steps to update your X-Series Firmware

1. First of all you have to download and run CrystalDiskInfo software and that you can get it from HERE.

NOTE: If you see "2.0" as the present firmware, that means you don’t have to update the firmware as the one you are having is already the latest firmware.

2. After that verify if your drive has an upper case or lower case part number, as mentioned in image.

3. Now you have to download the appropriate firmware for your drive from the list mentioned below

Either for UPPER CASE 256GB, or UPPER CASE 128GB, or UPPER CASE 64GB, or UPPER CASE 32GB, or
lower case 256GB, or lower case 128GB, or lower case 64GB, or lower case 32GB.

4. as you got the software Extract the “.EXE” file and copy it onto a bootable USB drive and reboot your PC and boot to the USB drive.

several motherboards have boot choice screens, that you can access by striking a key on boot, check your motherboard guide to observe if your motherboard can do this.

or else, varying the boot order in the BIOS for the time being might be necessary.

6. The system should boot to a command prompt, as mentioned in the image below.

7. Now you have to run the suitable “.EXE” file UPPER128GB pper64.exe

8. The system will inquire you to look for the drive. thus here you have to tit the Y key for yes.

You can refer the image below.

9. on one occasion the system discover the drive, you’ll see a screen like the image mentioned below.

10. Here you have to hit the suitable number of the drive you want to revise, then hit enter. The drive should be flashed at this point.

11. At this position your drive should be flashed subsequent to a reboot.
Reply With Quote
#3
Old 24-09-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: Corsair X-Series SSDs firmware update
If you have firmware version 2.0 or firmware vision 1.1 on X-256 installed, please ignore this post.

If you have troubles flashing the drive and you are getting any errors like "Firmware flash failed" or "invalid drive" or something related and you desire to send the drive to Corsair to have us flash it, please take note of the serial number on your drive.

WHILE SENDING THE DRIVE PLEASE REMINDER TO TAKE THE SERIAL NUMBER FROM THE STICKER, AND NOT FROM SOFTWARE

formerly you have this serial number, please go to our TSX program, situated here:

How to Install Snow Leopard on AMD

2012-02-05T08:28:00.001-08:00

This guide is for those who own an AMD pc or laptop and want to run Snow Leopard on AMD processors. Apple has provided some retail disk of Snow Leopard to run Intel. But that does not mean that you cannot use it on AMD. You can. With appropriate bios update and list of files you are enough capable of running Snow Leopard on AMD. There are number of more guides which are interlinked in the end, which states installation of Mac operating system on non-Apple hardware. In many places it is also necessary that you must download and look for the most appropriate package. You can easily found the same on the web. There are many patched files which are needed to provide access to the graphic settings. Always I force to read the pre-setup requirements before going for the installation. Some Mac setup needs bios modification. So it is very important that you must perform that properly. Improper bios update, or wrong files can cause dead system. You can then restore that re-flashing the official bios. Safer way is going for a dual boot system. There are ample of bootloader which works both with mbr and guide partitioning system. For Mac Chameleons is the most trusted one.

It is also correct that some of your system hardware or app might not respond here. This guide can be helpful for both testing and for those who wants to switch to Mac operating system on their existing system. Snow Leopard is one of the latest operating system by Mac with major changes and upgrades. In the end you can try running Mac OS X 10.6.2 Combo Updates. I had not tested this, but it is recommended to give your system more stability. This is the post part when you are done with everything and you are just going to use Snow Leopard. You can get the download link in the requirement part.

Notes: The Mac setup usually works with most amd chipset default settings. But the same has been found that there can be error with raid setup. And if you are using nforce chipset then you must set the sata on ahci mode. I found this update on a guide which is really very helpful. Do not ignore any updates and file which are recommended to download. Because they are responsible for your system stability.

Requirements:

Keep some blank disk ready with you. This disk will be used to create bootable disc (efi boot disk)
Keep some usb stick ready with you to transform important kext file in the kernel.
Empty a space in your hard drive. This is not a kind of dual boot setup, so basically your all partition will be deleted. You will need to create Mac readable partition system here.
Mac OS X 10.6.2 Combo Updates.
MBR Patch for those who wants to install Snow Leopard on MBR drives. I had attached a file in the link below. The instructions are mentioned inside the readme file to apply this patch.

Reply With Quote
#2
Old 24-09-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Install Snow Leopard on AMD
Setup Process

There are two way of running the setup. The first one is by doing a manual setup using DVD. You need an EFI boot this and Snow Leopard Retail DVD.

Second you can burn the dmg file (Which is Snow Leopard Image file) on a DVD from a working Mac operating system. You can also use 8GB flash drive for the same purpose. It is also possible to restore the dmg file on an usb drive, but remember that you need around 8GB drive space. Do not go for less space.

By using Mac OS X Install DVD you can restore the image file on an usb drive. You just need to here choose the appropriate source and designation to load the file for running setup.

First let’s go with the bootable disk. You can use EFi or Chameleon boot disk for this purpose. Boot from the disk and remove it. Now insert Snow Leopard Retail DVD. Press F5 to choose the option to boot from DVD. This is the one which I mentioned above to burn. The same process is also applicable for an usb drive. You just need to choose another option.

Once everything goes well you do not face any errors then you can go with the setup. Now the main process here is to choose the partition and the partition system. You can go with Journaled and also with mbr. But for mbr after restart you will need to apply the patches. For a straight and easy process I prefer to go with Journaled (GUID partition table.)

To deal with the partition process follows the last post of this guide : Mac OS X iDeneb Installation Guide for HP Mini

After setup Process

You had not done with the installation of Snow Leopard. Surely your system will reboot. But to get the Mac desktop you will need the boot cd which you used at start. This is because you have to prepare appropriate bootloader settings to let mac boot directly on restart.

Boot Snow Leopard and as you reach the Desktop it is recommended to run Mac OS X 10.6.5 Combo Update. This will give more stability to your system. It is necessary to run this updates to removes old bugs.

Once you are done with update thing the important task remained here is to create the HDD for running Mac setup. You will need to run the most recent and stable Boot loader for Snow Leopard. Download latest version of Chameleon.

It is also possible to configure the bootloader manually by performing some changes to the system. For this you can use AnVAL5.0.5 ACPI Loader. Download this and we can manual configure this bootloader to load Snow Leopard.

When you are on Snow Leopard Desktop run the terminal. In the terminal type disktutil list command.

When you press enter you can see a number of your partition listed. Choose the most appropriate partition to load Snow Leopard. The disk is name like disk0s,1 disk0s2, etc.

Once you had selected the disk you need then type sudo –s
Now type cd /Users/Desktop/AnVAL5.x.x. Hit enter. This will load the bootloader files.
Code:

sudo fdisk –f boot0 –u –y/dev/rdisk0.

Here 0 is the disk number that you had seen before in the diskutil list command.
Once the disk command is properly initiated then type the below command :
Code:

sudo dd boot1h of=/dev/rdisk0s2.

Here 0 is the drive number on which you are install Mac operating system and the 2 is the partition number.

Now you will have to copy the files of AnVAL5 loader to the mac partition root. You can do that by using the terminal or by using an usb drive. Keep a copy of bootloader files in a pen drive. You can do that by dragging the files also.

One you are done with the same you will need to move two file pfix , amd_insn_patcher file to the to usr/bin. The file is hidden so you might need to change settings to see the hidden files.

One everything went file you can boot to Snow Leopard. I case of any error refer to other linked guides also. They are more details and appropriate file attached. If some of your hardware does not respond on the system, then you need to find appropriate kext file update for the same.
Reply With Quote

Resident Evil 4 HD PS3 Walkthrough Tips and Cheats

2012-02-05T08:27:00.003-08:00

Cornerstone in the history of video game, Resident Evil 4 did not escape through the mill at ports of Capcom . Already declined four other media from the original Gamecube version, this episode has laid the foundations of the third person shooter is now back in an HD version not unlike the PC version, the technical problems and less. Still pleasing to the eye despite the textures that were Cracra SD illusion, the game suffers a little from the passage of competitors like Dead Space because of the camera elastic or absence of shorthand for weapons and healing items. It also regrets the inability to manually change the button configuration - only two types: original and how RE 5 - or adjust the sensitivity of the analog sticks, a little faster in View mode. We would have liked to see some unpublished or not on the development of the game, but it will settle the game raw mode and bonus Mercenaries (scripts, costumes, weapons) present for the PS2.

The immense qualities as happily have not aged six years and is still impressed by the variety of situations, the showmanship, the gameplay and level design foolproof, fighting boss intense the twenty hours of uninterrupted action available. Clearly necessary if one has never touched Resident Evil 4 in his life, this port high definition is still too lazy to deserve the attention of players who have already returned the game in every sense, unless a incurable hunter success or not to have older versions and hardware to run them.

Game Plot :
December 1998, 3 months after the destruction of Raccoon City: Claire Redfield narrowly escapes the clutches of the fallen city. But she is far from safety. Continuing her mission to find her older brother, S.T.A.R.S. member Chris Redfield, Claire is captured by Umbrella Corporation and taken away to a top secret prison installation on Rockfort Island. Managing to escape, she soon realizes that the entire island has succumbed to a viral outbreak, filled with flesh-eating zombies and experimental Bio-Organic Weapons (BOWs). But little does she know that these will soon be the least of her worries; a mansion filled with Umbrella's dark secrets – and even greater threats – lay in wait.

Classic Resident Evil survival-horror
Survive using only your wits and limited ammo as you face a hostile environment and discover the truth behind one of Umbrella’s founding families
Play as fan favorite characters Claire and Chris Redfield
Full campaign story, unlockables, and additional score attack "Battle Game"
Full Achievement and Trophy support

Resident Evil 4 How to kill Bosses:

Del Lago aka Lake Monster: In the start level your boat get in trap of a giant fish. It is not difficult to kill him but you just have to be careful that you dodging the tree trunks. A few litters harpoon into his mouth and Del Ago is dead, but quickly at the end you have to start cutting a rope of Leon's leg, lest the animal moves into the depths of the lake. Press A continuously to swim and reach the boat back. Move the board and Press R to raise the harpoon and give some hit on the back.
El Gigante: The parts come a few times. Just shoot with the TMP in the face until he bends down and you can cut the parasite on his back. Three times the power (or so) and El Gigante you leave a chunk of money. Use flash grenade to stun him for sometime. You have to shoot continuously with hand gun. When it fall down giving you GOLD BARS.

The Mayor: Shoot so long for him to fall down his legs. Dannacher you think you is best in the first Stick, as he climbs along the Rohrenn. He has no particular target point, so just shoot him somewhere. You have to keep shooting so that he is separated from the villagers. Use dodge button to control your actions. You can blowup the barrels to harm him more.
Garrador: Do go near to him in any case around! Garrador is blind, and when you run, he hears you and goes off to you. Sneaks around him and irritated him with shots to the bell (if there are any). The parasite on his back, his hit points, so to see that you shoot it!

The "right hand" of Salazar: The cattle are annoying You have two choices: either she freezes him with one of these bottles and take a rocket launcher to kill him (but not really worth it financially). Or do you run around as long and freezes him with the bottle until the door opens and you come to the elevator. To shoot him is not worth it, because that's just a waste of ammo!

Salazar: Run to the right so you can only reach a tentacle, and you can avoid it with the reaction tests. If you shoot on the right arm, then he pulls himself for a while. As long as you shoot on the main eye, and eventually will open in this part of the Salazar and you can shoot at him. Broken Butterfly is completely tuned up with it quickly died .. the rocket launcher is also good, but really need this shot count!

"IT": IT's the disgusting part mutants. Examines the green switch in the container and shoots at them. Dannacher you can press a red button. The second you have to also find even more, then you have 30 seconds time to leave the container otherwise you are dead There are three containers, but not too heavy. You have to watch out that you will not get caught too often. In the end, you shoot with your best weapon on him, at best, the Broken Butterfly.
Krauser: Searches for the first two pieces of the puzzle. Krauser appears and then when. Take your knife and ran towards him, he's pretty fast so watch out and dodges his attacks. The third part is self-Krauser and you have 2:30 minutes time to defeat him and use the parts. Shoot him in the legs and then edit it with a knife ... deviates from his attacks if he caught you're dead and you have to do everything again!

Lord Saddler: For the boss, he is pretty easy. Shoot the eyes on his legs and then climb on him and stab with a knife in his main eye. In addition, you can leave her with the metal carrier crane crash to him - that's per crane, but only once. Eventually Ada throws you a special rocket launcher, he is on the second platform. A deliberately shot at Saddler, and he's dead now but you must within three minutes to leave the island with the JetSki. If you have to ride but only once against a rock you all do it again!
Reply With Quote
#2
Old 27-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Resident Evil 4 HD PS3 Walkthrough Tips and Cheats
Walkthrough

Chapter 1 :

Once you're in control of Leon, the trail follows the north. Now enter the house there and talk to the residents of these outs himself as an enemy and wants you to the leather. Uses the gun and shoots him. Examined the hut after ammunition and healing herbs from. On the second floor you will find plenty of ammunition, jumps out the window, because the first enemies are on the way to you. Now follow the road further north, pays attention to the bear traps, a kick to it and you lose a lot of vitality. On the way to the village you should release the dog from the bear trap, he will thank you later. Once you've entered the gate, you should take hold of the legs and run, preferably as soon as possible by quickly pressing the buttons indicated it is quite possible.

Have you survived that, then you've finally arrived in the village. The villagers watched with binoculars and walk around outside, looking for a small two-storey cottage, where you'll find the shotgun. Now she must fend off a small wave of villagers and survive for a short time. Remains the best in the house and put all the furniture that is not nailed down before the windows and doors. After a short time the bell rings and the residents retire. Then the village is completely empty, leave the village lawn the best chance for items. Then go through the double doors in the north, it will bring back to a farm.

This you can head north to leave immediately. A long path that leads you deep into the valley, lies before you, well here is Sprint announced, the villagers throw a huge rock rolling after you. Presses as fast as possible given the keys to survival. Now you find yourself in a swamp again, eliminating all enemies there, but watch out for the booby traps and enemies with dynamite. To defuse the traps shoots from a great distance to the bomb. Now enter the house and now follows the beating, the cabinet pushes on the page and enter the secret room. A cutscene will start. Going into the cutscene you are attacked by an ax-wielding enemy, while pressing the specified key in order to survive. Are you liberated and alive, you can leave the house, there is really the next cutscene starts. The dealer presents itself, you can buy it at all, except ammunition. Whether new weapons, upgrades, medicinal sprays everything he has. Money can be found in the slain enemies, so to eyes.

Goes to the scene by the big gray door and repels the waves of enemies. In the north there is a large locked door, for this you need two coats, welchee her in the houses to the west and the east is. Combining these in the menu and open the gate. There follows the path and fight your way from room to room in front, but pays attention to the bear traps. Climb up the ladder at the end to finally get back to the earth's surface. There follows the path until you come to the house of the mayor. In the middle of the house is already waiting for the first puzzle of the game, you must set the character of the village. Rotates along the middle arrow until a noise is heard and would have solved the puzzle and open the room.

Once in the room already starts another cutscene, where you will be presented to the mayor of the village, who goes off with his overwhelming forces upon you. After her escape so could you just yet, give yourself the insignia key still in the closet and grab the first room then exit the house as quickly as possible. Follows the path you take, but beware of the enemies with the chainsaw. One hit and you are dead Are you escape all enemies, you find yourself back in the village. Battle your way from there to the church, which you can open it with the insignia of conclusions. There follows the tunnel until you reach the cemetery. Stay tuned right and follow the path to the bridge, the church you can still not open.

Follow the bridge and open the door. Here again throws a crazy villagers a rock at you, here is race the day. Follows then continue the path until you come to a lake. There increases in the small motor boat and already shows the first boss. Del Lago, a giant sea monster has an appetite for you. The monster is defeated only with a harpoon. Press the right shoulder button and you have the harpoon in hand. Del Lago grabs your boat and dragged it behind him, it differs from the wooden posts and waits until you're free again. Best opportunity to put the boss a couple of specific meetings. After a few hits, it's over and you are the winner. Now ride a motorboat to the north, even to complete this chapter.

Chapter 2

Once you have the consciousness that comes through the door and follow the path. A certain time must have elapsed since it is now night, unfortunately, this has a major impact on the enemy, who now shows his true colors. Las Plagas, small parasites emerge from the heads of enemies. These are particularly resistant, 1-2 targeted shotgun shooting range but would loose. The use of the stun grenades reinforced very well. Then goes on and jump over the gate on the other riverbank. Continues its path along the river and the waterfall is once again on the other side of the river by jumping over the gate. Shoot the crates off the hook there, to get to the other side. On the other side of the river the lever to open the passage to the waterfall. Now enter the new area now and follow the cave area, until you get to a double door with a circular insignia. Take this out of the socket, passes through the now open door. It will bring back in a cave. Jumps into the boat and ride it to the edge. Once at the top of the next boss is waiting for you. El Gigante, as the name suggests, a giant who is only vulnerable on his Plagas parasite.

Do you have at the beginning of the game release the dog from the bear trap, he stands to the side you now, this distracts the monster, and you can take him under fire. Shoot out on top on the head, after a few hits El Gigante falls to the ground. Now sprint to him and jumps on his back, prick it as often as possible on its parasites, until he again rouses. Repeat the game until the bosses finally gives up the spoon. This is defeated, you go left through the wall towards the church. Once you are there, you can open the church with the round Isignie. Climb down the ladder and turn left you with the chandelier swings to the other side of the church. There you will find some smaller switches, which are a mystery. It expresses the following color combinations: 2 x red, 3 green and 1 x blue, let's combine this and a door opens, walk into the secret passage and you meet the kidnapped daughter of U.S. president.

Now you are no longer alone on the road, Ashley Graham, the daughter of the president is, you now to one side. Unfortunately, the watch is not armed, so good, so it is not their lives or breathes again abducted. It will bring back in the outbuildings of the church. Leave the building through the door and beware of the many opponents beware. Directly in front of you is a car with explosives. Shoots as fast as possible on it and he drives car to the village residents and clearing the way you make. Follows the established route into the village. Once there, go along the right path this time, but it fits on the bear traps, because Ashley runs into you. Ashley opens the door to you and it can go. Crossing the suspension bridge there discovered to her a lonely house. Then this starts the next cutscene. Now you find yourself with Luis in the house and left to fend off an army of villagers. Blocked in the house all the inputs and outputs with furniture to stop the enemy for a short time. After a certain time no longer hold the furniture up and you have to drag you back to the second floor. Keep yourself up the enemy at bay until finally the villagers.

In the right gate you come across another El Gigante, in the left Ettlich villagers waiting with chainsaws and other weapons on you. The decision rests with yourselves at the end of each gate you find yourself again before the end of the village. But unfortunately, the door is closed, it needs to open her one eye. The eye of the mayor. This is in the warehouse under the cable car. Increases in the cable car and ride down. Pays attention to the enemies that are located on the other lane. Shoot it off with the sniper rifle. Once at the bottom of the trail follows up the warehouse. There is already waiting for the next boss of you. Mayor Mendez inhibitors. Opens the warehouse and immediately pressed the key combination on the bottom of the screen will appear. Mendez is now the fight and shows its true face. He mutates into a big bully. The best strategy to defeat him is to fire, explosion and blend throw grenades at him at a safe altitude. After a short time, the mayor loses his legs, making it even more nimble and maneuverable.

Now uses the shotgun to him finally to give the rest. After about seven salvos bored Mendez no longer among the living. Then examined his body, you will find the sought-eye. Now ride the cable car back to the door and opens it. There follows the rising path, where you will be attacked by several villagers. Have you done two, they feed on large gun. A truck full of explosives driving toward you. Shoots the driver in order to eliminate all fine. Now follow the path to the castle to complete this chapter.
Reply With Quote
#3
Old 27-09-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Resident Evil 4 HD PS3 Walkthrough Tips and Cheats
Chapter 3

Now it will bring in a new territory again, this time is a big Castle of the scene. Battle your way up the stairs until you are attacked by two catapults. These are operated by two monks, while you entrenched in the small tower house and the two monks from a safe distance eliminated. Also shots of the explosion barrels lead to success. Imagine now that Plato set up and operated the crank around a cannon.

Use this to open the big gate. Now go through the next door. Take there the platinum sword from the wall bracket and replaced it with the gold sword that you get a higher floor. This opens a secret door behind which waits for a cutscene of you. Now open the next door, a new breed of enemy is waiting there for you. Monks with wooden signs and impact weapons you want there to the laundry. Uses the shotgun to destroy the wooden sign, the rest is as usual. Then follows the premises to the north, until you get into a room with a chest. Now go back to the place where the cutscene was just launched and there opens the door. Now it will bring in the main hall of the castle again, where this starts another cutscene. In this raises the front of the castle owner, Ramon Salazar.

Your task now is to follow Salazar, but the road is blocked by a wall, which shines with a decoration, but missing 3 parts. These have to bring her now. Now go through the right door to enter the next area. There follows the path until you hit on two fire-breathing statues. These must be turned off. The switch is located in the torture chamber. The key can be found next to the painting of the statues. The torture chamber can be found in the south. Once there, it is dangerous, because there again waiting for a new kind of enemy. The key can be found next to the painting of the statues. The torture chamber can be found in the south, is it dangerous arrived there, because there again waiting a new kind of enemy. A strong man is the only mutant on the back, his parasite, is vulnerable. This can kill you in one hit, so great care is announced.

Make Office 2010 Retail Installation to Office 2010 Volume License

2012-02-05T08:27:00.001-08:00

Here is a tutorial for making the Microsoft Office 2010 retail edtion to Volume License Edition. It is basically a process which you need to check out by following certain steps and procedures that is been guided. For your information Volume licensing is for organizations looking to get the most out of their software investment, Microsoft Office 2010 offers more business value with simplified licensing options. Use the interactive “Buyer’s Guide” to find licensing-related information about use rights, upgrades, fulfillment and product activation. See “What’s New” with Office 2010 and its licensing. Learn “How to Buy” and get answers to “FAQs” about licensing Office 2010. You can get more information on the link provided. Click on it and get worked as needed.

Reply With Quote
#2
Old 20-08-2010
Vigi.C Vigi.C is offline
Member

Join Date: Mar 2010
Posts: 81
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
Here is the steps given as follows to get sort the thing and make the process well to be sorted and implement. All you need to do is to follow as below:

You need to have a retail pack or od Microsoft office 2010 which may look like en_office_professional_plus_2010_x86_515486.exe or the name may differ too.
Now as it is been done you need to look out for the installer that is you need to execute the installer as administrator and wit until the yellow screen appears which will aks you out for the product key which will be needed. Now you need to take the start menu and type %temp%. Now you may then be able to see a folder which would be named as OWP6FC3.tmp. The name may differ a bit. Now you need to copy the entire folder to C:\ location. It is very much necessary and essential that you do not close the installer until the copyin is been finished
Look out for the folders insisde for the folder named which is given as follows

ProPlusr.WW for Professional Plus
VISIOr.WW for Microsoft Project
PrjPror.WW for Project Professional

Now you need to delete or replace the folder with the folders of select Edition by WZOR.
As it is been done you can now have a good VL that is Volume License. So you can make use of it well. Do check out.

Reply With Quote
#3
Old 20-08-2010
Vigi.C Vigi.C is offline
Member

Join Date: Mar 2010
Posts: 81
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
There is another way through which you can make the thing to work well and process for the conversion well. Follow the same as given below:

You need to follow out by downloading the attachment or rar file that is been provided.
Now as it is been done you need to extract the Retail2VL.bat as administrator which will be better for you
So do look out for the same and then get the issue to be sorted well.

It is very much needed and essential and the most simplest way through which you can make the desired thing to be processed and work well as required. So do look out and then make the things to be implemented. It will be better for you and then make the desired thing to work.
Attached Files
File Type: rar Office14Retail2VL-0.1.rar (184.3 KB, 192 views)
Reply With Quote
#4
Old 20-08-2010
Vigi.C Vigi.C is offline
Member

Join Date: Mar 2010
Posts: 81
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
One of a better way through which you can make the desired thing to be processed and work is by follwoing the steps that is mentioned. It is given as follows:

* You need to first download the PropPlus.WW and then extract the downloaded file or application where you wish to

* Now extract the retail file in C:\office. Below is the command through which you can make it work

Quote:
xxxxxxxxxxxxx.exe /extract:C:\office
For your information xxxxxxxxxxxxx is nothing but its the retail file name

* Now you need to get access to the C:\office and then delete the ProPlusR.WW directory

* Copy or replace the same by making the downloaded content to be copied that is ProPlus.WW to the directory in C\office

This will then help you out well to get the thing work and process for you very well. It will be better for you and can make the desired thing to be processed. Do look out for the steps and procedure.
Reply With Quote
#5
Old 20-08-2010
Vigi.C Vigi.C is offline
Member

Join Date: Mar 2010
Posts: 81
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
You can work well with the above methods that is mentioned well. You can work and process for the thing by checing out this procedure if you are not clear with the above ones. It is simplest way to work and make it done. All you need to do is to localize your Office install DVD. You can make it work by doing a easy personal search. You need to find how to transform Volume License Retail or vice versa. now all XxXX.WW folders are nothing but the installed folders for VL version and the XXXXR. WW are tghe retail ones. Now as you need to make the VL you need to install VL Proplus install DVD from a Retail ProPlys DVD, You just have to replace the folder PropLusR.WW with ProPlus.WW. You have to apply the same for Visio.WW and VisioR.WW or PrjPro.WW and PrjProR.ww. I hope this will help you and make the essential changes to be implemented and process the needy taks that you want to.
Reply With Quote
#6
Old 20-08-2010
Vigi.C Vigi.C is offline
Member

Join Date: Mar 2010
Posts: 81
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
I hope the above provided solutions will definitely help you out to make the retail pack to Volume License. The above solutions has worked for me as I have followed. So do check out by following the procedures that is been mentioned. You may then be easily get to work with the desired Volume license with the use of retail pack. It will be better and you can thus work without having any issue related to the same. So do look out and then make the implementation as required. It will be better.
Reply With Quote
#7
Old 18-09-2010
faisaldali

Posts: n/a
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
Thank You for this.
Reply With Quote
#8
Old 28-09-2011
ajhie ajhie is offline
Member

Join Date: Sep 2011
Posts: 1
Re: Make Office 2010 Retail Installation to Office 2010 Volume License
Thanks a lot..
I'll try these steps..

Might and Magic: Clash of Heroes Walkthrough, Tips and Cheats

2012-02-05T08:26:00.002-08:00

Might and Magic: Clash of Heroes is an exclusive Nintendo DS game that is in the Might & Magic universe settled. Might and Magic: Clash of Heroes features five adventures in which players try to alternate between free exploration and puzzle-based battles around the world from the demonic Chaos Ashan preserve. Suitable for the Nintendo DS will be Heroes of Might and Magic Clash also introduce a completely new design in the manga style. In a world populated by knights, elves, wizards, necromancers and demons, the player creates his own hero, puts together his own army and leads them through an exciting campaign in the mythical world of Might & Magic. An HD version was released in 2011 on Xbox Live Arcade and PlayStation Network.

If you did not know the concept of puzzle-RPG initiated by the famous Puzzle Quest, remember that it covers nothing complicated: it is a role-playing game - with all that that implies in terms of progression figures (statistics, skills, equipment) - which fights are resolved in the manner of a puzzle game. Clash of Heroes, however, offers five types of heroes (elf, knight, wizard, Necromancer and Demon), clean and with capabilities of specific units, and shows that a worthy scion of Might and Magic saga in which he s' registered. These heroes may be embodied within five scripted campaigns that you must unlock one after the other. Each with 6 to 8 hours of play, you'll need at least thirty hours to complete the title, not counting the free mode and multiplayer mode, which will be discussed at the end of this article.

The game plot which is the actual story is based on some kind of fiction world. The storyline of Heroes Clash of draws selectively from own background to the world of Might & Magic. Here is what the game site says: Ashan is a world of legendary peoples. Proud Elves guard the emerald forests of Irollan... Mighty Knights rule the fiefs of the Griffin Empire... Studious Wizards survey the oasis-strewn deserts of the Silver Cities... The grim Necromancers worship in the wastelands of Heresh and the ravenous demons immured in Sheogh, their prison world. During certain lunar eclipses the walls of Sheogh weaken and demons burst forth, plunging Ashan into war. And since the dawn of times, the demons legions have been repelled by the allies thanks to a powerful artifact known as the Blade of Binding. Once again the armies of Sheogh are coming and the Blade will be wielded...

A simple, strategic and addictive, the gameplay is a pure success. Too bad the gameplay of the PC version is marred by frequent load times, unjustified on the media, and a slight lack of clarity due to the vertical organization of the battlefield, which adapts well to a necessarily less that double-wide monitor screen of the DS. Might & Magic: Clash of Heroes includes five scripted campaigns (with thirty hours of play), a free mode to take part in skirmishes and multiplayer mode to practice two or four, in a duel or in cooperation, local or online.

This guide is beneficial for all platforms. Now the game is also available for pc. This gives the game a multiple platform where different users can play under one roof.

Factions:

Sylvan: It lacks attack and defensive power but have increased speed on the battlefield. Players who enjoy hitting their opponents quickly and often will gravitate towards this faction.

Hunter
Pixie
Bear
Druid
Deer
Unicorn
Treant
Emerald Dragon

Heaven: A feudal holy empire, protected by knights and monks with access to light/life magic, slightly favoring defensive attributes. Players enjoying to build a strong defense and strike with swift counter-attack will like this faction

Swordsmen
Spearmen
Archer
Knight
Priestess
Angel
Griffin
Sword Master

Academy: This faction is a magical powerhouse and benefits from increased magical possibilities. However the academy suffers attack strength and weaker defensive capabilities. Players that enjoy the status altering magical spells will appreciate the unorthodox and varied tactics that the

Academy provides.
Apprentice
Gremlin
Golem
Mage
Djinn
Rakshasa
Titan
Phoenix

Necromancies: These undead necromancers utilize their darkest technique to assault their enemies with rotting, undying troops. With Dar magic on its side, the Netropolis fiction benefits from increased defensive abilities and strong magical attributes.

Skeleton
Zombie
Ebon Guard
Vampire
Ghost
Bone Dragon
Death Knight
Wraith

Inferno: The chaotic demon horde relies on pure power to crush its enemies. Inferno battle units have increased attack power to make up for their weak defensive capabilities. Though slower than most enemies, players will be able to utilize many powerful offensive strategies with his faction.

Horned Demon
Imp
Hellhound
Sccubus
Nightmare
Sorcerer
Abyssal Lord
Pit Fiend

Characters:

ANWEN :

FIONA :

GODRIC :

AIDAN :

NADIA :

Beginners Tips for playing Might and Magic: Clash of Heroes

Have some words with the villagers to get some hints. Some also give you quests, which are rewarded with raw materials
Little by little shrines discovered where her buy additional units can. Be additional / master units die when they destroyed and / or removed and in such shrines must be newly purchased against gold and commodities. Each add / master unit has its limits (5-10)
Also looking for hidden places, objects and artifacts, these help make you stronger and a benefit in the fight
"Later" in the game you make a habit carrier that provided you with bounty hunting. However, caution should be exercised, almost all mission objectives are for your present level difficult or even not to conquer, it closes off other quests first or go ahead in the story and goes back later
Do you have the first general of the people have to defeated her which gives you the opportunity to participate in puzzle games, here you have a round of planning so that your mission objective is defeated
Stores regularly to avoid unnecessary losses. Fits your army as well as the upcoming battles on your artifacts .
Just before a fight you get a battle map. There you're not seeing the level of the opponent and usually also the level of its units. At that moment, you can also stop the fight and still avoid such a defeat.
Consider also your people skills and your passive units. Gold you get also from ambushes. Displayed suppressed during car you are on the map, x to your active quest and get to dig to find places on the current map. Returns to old areas often times, there emerge from time to time new Quest NPC
After you've played through the campaign, your game is saved. Invite them to run around and Save with Nadja and still be able to collect in some battles, the last missing artifact.

Reply With Quote
#2
Old 28-09-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: Might and Magic: Clash of Heroes Walkthrough, Tips and Cheats
Walkthrough :
Sylvan

Take the right to Findan cousin, from the treasure chest right Artifact: Ring of Vitality
Take to the left to Maethorn
To the right and bottom right diagonal (red nodes) in the grotto
Leave cave, pick up the blue man (agent) and titles Cromir
Handle to the left and order Cromir
Pick up the agent and reward profile skull eyebrow
Up and left in the cave, demon, skull eyebrow and assaults (level 7 when you leave)
Cave exit and pick up the agent and reward profile Cuthlion
Up to the next picture, fighting for the right of the elf druid (unicorns)
Leave the cave and climb the tree druid
Top: Euny Erstein series moves to the right, then reverses, stops when the next row is full
After sliding down to the bottom and right: to convince branch leaf
Go right to the next screen and up to the village (solutions as a video on YouTube)
Top and left: Finish Task Cuthlion

How to Recover Raid Partitions

2012-02-05T08:26:00.000-08:00

RAID stands for Redundant Array of Independent Disks. This type of system was created to increase the security of the data, which doubles to be stored in two units simultaneously, and transfer rate, depending on the type of approach based on the protocol type of RAID you use each system. Except in the case of the RAID 0 (stripping ) marks the fact that this type of system has more security than conventional storage systems. Because of this it is being recommended for companies or users to store and manipulate data of some value that makes them valuable data that cannot afford to lose.

For instance, it is possible that one of the hard drives connected in RAID stop working . You can replace the failed drive without causing any loss of files, and in some cases server ready for it, can be carried out replacement without even having to shutdown. That can be done manually or with the help of any specialized tool. There is software to recover data in such systems, but when dealing with a complex problems. For novice it is recommended that a professional company take care of everything process. Depending on the type of RAID you are using, the chances of success vary, but most professional companies have great technical and human resources capable of solving any problem, whether hardware or software.

Levels in Raid Array
There are several different RAID levels available. It is important to understand each level to learn about your data risk. It also plays an vital role in data recovery and other open up other options :

RAID 0 - data striping (no data protection). The advantage of this system is that it offers the highest performance.
RAID 1 - Disk Mirroring (provides data protection by duplicating all data from a primary drive secondary drive in). The advantage of this system is it offers the highest data protection.
RAID 0/1- This combines both RAID 0 and 1. The benefit here is highest performance + as high as possible data protection.
RAID 5 - Data Striping with distributed parity (a form of data protection to reconstruct the data drive failed in a disk array). This system offers the best cost performance for multi-drive environments.
Making a RAID system installed can provide peace of mind. With RAID installed you can rest assured that even in case of system failure your important data safe.

Common reasons due to which RAID does not work :

RAID array is an composite device, so the problems are multiple and complex. The easiest way to divide them into two classes.

The first problems can associate with mechanical malfunction of some parts of the array like :

broken single disc or multiple discs
burned array controller
bent, torn data cable or power cable
broken backplane
water, physical damage to the server

and second can be due to following :

controller is not broken, but the initialization fails due to lost disks, logical volumes, configuration, etc.
bad sectors in your hard drive
initialized array / moved the hard disk space
improper start up after rebuild checkdisk, fsck, etc.
reformatted or re-install the OS, deleted files, viruses, etc.

Quick Steps to recover data

If the raid array works but does not shows any data, no checkdisk then try to rebuild, initialization, rebuild the array. The data lose here cannot to reverted.

Make sure you know exactly what the problem is. This is very important to analyze the issue and using the most appropriate solution.
Go on some tech forums and have advice for your issue. Explain everything, with images if possible to get most proper free suggestions. Or approach any professional data recovery service.

If you have very important data on that array, then the best answer is do nothing refer to specialists.

Recovering RAID drives :

The main way to recover data from RAID is a software build an image of the array. That can be done by a specialized software. The order of blocks in the array depends on the location on the disk channels and the algorithm of the controller. Before you start, should create clones of all the disks in order to protect themselves from wrong actions. Copies can be made in the form of files or directly to other drives. Work with copies or originals - you decide. I strongly recommend using a paper copy as if the source media are unreadable or volatile sector, working with such a disk can significantly worsen their condition or lead to complete failure.

To build the array, you need to know the parameters with which it was created. This is the block size and the sequence of drives. If you know them, we can assume that half the work is already done, and we saved a lot of time for other, more pleasant matters. If not, you'll need to pick up. You can do that by tool like RaidREconstructor.
Reply With Quote
#2
Old 14-08-2011
RedZot's Avatar
RedZot RedZot is offline
Member

Join Date: May 2008
Posts: 382
Re: How to Recover Raid Partitions
DATA Recovery

The first thing to do when you realize you just lost important data is not to touch anything and to learn. A hard drive is fragile, especially if one of its components is not in perfect condition. A sudden movement or inadequate work could complicate data recovery. The opening and closing of the computer or the installation of new software can also have an opposite effect to that desired future and reduce the chances of recovering your data intact.

There are two main types of failures that could lead to a loss of computer data: Logical failures that refers to the software failure and the second one is mechanical failures. A mechanical failure may ultimately occur because of a disaster such as a fire or flood. The hard disk is sensitive to many factors and intense heat or exposure to excessive moisture can cause failure. It is common for companies specializing in data recovery must deal with hard drives half burned. Logical failures are more common than hardware failures. They are not caused by failures of physical hard disk, floppy disk or the unit of storage used, but a disorder program. The classic example of a data loss is accidental deletion of a file. This case can occur, for example, when two identical files and delete the wrong one.

Using an DATA Recovery Software

Several programs were created in order to retrieve data erased or lost. This software can be extremely useful when the problem is a software and it was impossible to recover the lost file by a manual investigation. To summarize the process used by the vast majority of these programs, it is to ignore the index created by the operating system and to explore the hard drive directly. The software is able to detect the presence of a file without using the index. This means that even if the file was deleted from the index (by accident or on purpose), the file data is still present on the hard drive and these programs are potentially able to read them.

You can now understand why it is necessary to be careful the operations performed when a data loss is detected. Indeed, since the operating system is more aware of the existence of the file, it may at any time decide to write new data on the hard disk where the file was lost. Once new data recorded over the original data file lost, it will be impossible to find this file, at least not entirely.

Raid Recovery :

a modern tool for data recovery from all types of RAID arrays, dynamic disks, embedded and external systems, distributed information storage. The product supports a wide range of hardware, embedded controllers and software RAID, including controllers, embedded in modern motherboards with chipsets Intel, NVIDIA and VIA.

Recover corrupted RAID arrays in a fully automatic mode. DiskInternals Raid Recovery is the first tool to automatically detect the type of the original RAID array while still allowing for fully manual operation. Raid Recovery is no doubt a highly valuable tool for users of all types of RAID arrays, whether hardware, native, or software. The drag-and-drop user interface allows for easy operation by anyone.

RAID Reconstructor :

Raid Reconstructor allows you to recover data lost or corrupted hard disk RAID level 0 (2 storage units) or level 5 (3 to 14 units of storage). The application scans the disk and retrieve the necessary parameters such as block size or direction of rotation, for example. Then you will be able to copy the disk sector by sector, or to create a usable image with the other recovery software GetDataBack.
Reply With Quote
#3
Old 02-09-2011
gimmytalks gimmytalks is offline
Member

Join Date: Sep 2011
Posts: 3
Re: How to Recover Raid Partitions
There are many program which can recover files from failed raid arrays.

Usually there are three types on RAID that you may know

Freeware - some free ones does not has the ability since RAID is much complicated than its capability
Shareware - Some are good and they can recover files from failed raid
even better recovery programs - they can reconstruct raid array more than just recovering lost raid files.
Reply With Quote

Resistance 3 PS3 Walkthrough, Tips and Cheats

2012-02-05T08:25:00.001-08:00

The first two Resistance have followed the adventures of Nathan Hale, a brave soldier, a virus alien. If the disease has also given superhuman regenerative abilities helping to repel the invaders, the hero of an entire nation ended up being totally consumed by this evil, to disappear like the others. In the third episode of the series, the player is a character diametrically opposite in the person of Joe. The father was rather quiet but desperate to protect his family, and it will gradually turn into a formidable killing machine through the chapters (twenty in all) for a campaign that will take him through the United States. The single player campaign of Resistance 3 differs from previous games by an atmosphere of survival much greater. The human race almost completely decimated, the hope of victory is slim and the few survivors find themselves in isolated camps, returned to the state of wild animals, or turned into fanatics blinded by religion.

If Joe's character remains relatively smooth throughout the adventure, he meets along the way so crazy, garbage, or desperate people, which makes the trip more interesting outside the phases of pure action. Levels also are full of little notes or tapes for use in giving the player more evidence concerning the organization of resistance, or the evolution of scientific research to counter the terrible virus Chimera. Do not spoil the cut scenes are pretty successful, helping to enhance the immersion of two shootings.

For who says survival also said rationing. In Resistance 3, it is common not to have balls for his favorite gun, which requires cunning and especially to use the entire arsenal of the best way possible. In the same vein, the fact of not having automatic regeneration as in the vast majority of FPS today is a blessing. Although refills of life are everywhere, it still requires playing differently and taking your time before rushing headlong into the pile. The use of weapons and their full potential takes on its meaning, but the difficulty is generally measured stack properly. The game is not very hard, but that still his little challenge.

Walkthrough:

Chapter 1: Home

Resistance 3 begins with a beautiful cinematic and you take control of Joseph or Joe for short. Move to the pretty blonde to pick up a newspaper. Then take the left tunnel and walk until you reach another corner of the house. You will find the map of Bogota on the bed right out of the tunnel. Right after you arrives at the shooting range. Take the cleaner and do a little training session. After that, find Susan in the briefing room. Dale will have to find the range. Before going to the place, just control it moves to a nearby table and picks up the Wild against military report. Continue to collect two more rooms on a bed Postal newspaper from Bogota. Walk to the next room to reach a kind of shooting gallery. Pick up the bulls eye and practice in the field of fire. After shooting several targets and doing different types of shots, tested with the Magnum HE.

Finally you are ready and went out. Come to Susan to discuss the plan you have to follow. Your goal is to meet with Nate at the bowling alley. Follow your partner crosses the cafeteria, down the tunnel, up the stairs and continues to observe a sequence. Go through the two tunnels with your teammate you finally attacked by chimeras. Get out all the stops and shoot the enemies on the right. A stalker comes next from the left. Head over to the left and throw him a grenade to disable his shield. Use the secondary weapon to target the cleaner automatically stalker. Shoot continuously until the reactivation of the shield. Repeat until run out of ammunition. Head over to the hut indicated to find ammunition on the roof. If necessary, pick up the kits also care.

Chapter 2: Wanted

After the video, you have to find Tommy Dean. Exit the tunnel and take the newspaper in the treatment room to the left. Go forward and turn left into the room with a projection blackboard. Take notes on the desktop. Climb the stairs and collect the magnum ammo in the room. Go up one story to a friend gives you a different type of grenade rather effective. In the next room, stock up on ammunition and stay on your location to shoot a few dreams that come to you. Get off the shed and take the ammunition on the bodies.

See a transport unit with chimeras. Use quickly shrapnel to kill a group of them and eliminate the rest of hybrids, covering you with the vehicles. Collect ammo and health of the area and open the garage door. Move to the barn in front of Joe and open the door holding Square. Inside, you will find Tommy. Go upstairs to find an audio diary on the bed. Go back down and head to the kitchen to find Tommy. Outside, to confront the Chimera in the wheat field. The Magnum secondary fire and you should be very useful.

Head over to the ledge after passing the ammunition and you restore your health. Once inside, meet with Tommy. Before continuing, collect ammo and health of the ground floor as in the above, plus an audio diary on the bed on the top floor, called bounding Bite. Return to defeat Tommy and more hybrids, either secretly or not, and once you do, advance to see another cut scene.
Reply With Quote
#2
Old 30-09-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: Resistance 3 PS3 Walkthrough, Tips and Cheats
Chapter 3: Lost

Follow Tommy and you'll be in the danger zone. You do not have choice but to run to avoid the attacks of Goliath. Go for it until you return to the previous house with the roof destroyed. Before going out to the battlefield, take the ammunition. Outside, kill the skulls of iron using grenades to stay safe from fire borer. Then pick up this new weapon and use it through the wall that separates you from Haven. The L1 button allows you to see through walls and kill the hybrid. Outside, walk towards the bridge to see chimeras. Kill them and avoid the explosion.

Continue and kill more enemies to attack you, in addition to firing several roots (egg-shaped objects that are in the sides of the area) and moves through the stream, while dodging enemy fire and break more roots. Enter the building and collect the Hedgehog. Your goal is to fight for the mill. Destroy all the roots and hybrids that are attacking you, looking for high positions to make it easier, while accompanying Tommy. Then through the door. Go under the bridge to continue your journey. Run without stopping to avoid the rockets. Climb the stairs of the house to be free. Take care of yourself and fill up. Outside, climb quickly to the left on the roof with the ladder. Your position, use the drill to kill as many enemies alone and without injury. Afterwards, go down pick up the ammunition on their bodies and to heal afterwards. Continue to face the next horde of enemies. Follow Tommy to the stairs and kill the next hybrid. Once calm has returned, open the door and bypass the enemies. Kill them all to be able to cross the bridge. Remember to heal and stock up on ammunition before leaving.

Your current mission is to save the residents of Haven in the covered bridge. After finishing with a small group of enemies, meet the head of the covered bridge, but before you shoot more herbs, before crossing it and watch another scene.

Chapter 4: Women and children first

Go for following your friend until he gives you a sniper rifle. Outside, run the mini turret to kill some chimeras. A first shuttle arrives, shooting at you and cowardly enemies. Shoot them to face a new batch. Think through the house where some people together to find what you need for your arsenal and your health. Continue until the arrival of the reapers. Put yourself in the shelter of a house to liquidate easily. After a period of combat, you have to fold up the main street. Go back just as more long-legged and other types of chimeras. Up the ladder is recommended central vision for a better shot, or approximate to ships carrying more chimeras and kill them as they fall.

Finally, you will Brawler. To win, you have to shoot the weak spots indicating that it may be (first shoulders, wrists and then second chest), if possible, with the Magnum. If you do not receive any impact (you can do tricks later on), you get the trophy Watcher zoo. After defeating him, flee Haven by the tunnel under the church and watch the scene. Turn around and head over to the church to join your friends.

Chapter 5: Wrighsburg

After the video, the action moves on a boat. Pick up the daily change strategy, in front of you (in front of the boat) and the daily ice blocks, which is in the back of it. On this occasion, various enemies will come storming the ship. Your mission is to advance along the river while you kill them all. Prevents rise to it, because it could complicate the passage and kill them from a distance. On the boat, you will find unlimited health and ammo (the latter in front of the boat). First, find the roots and bulging kraken then receive Rossmore. Try it with more roots. Cross the bridge and finally frozen mugged several Grim. Destroy them, if possible, before they board the ship. Kill them from a distance and, if short, with a shotgun.

Then you will be attacked by robots shock. It is best to use the secondary weapon Marksman on the floor. Then, crossing a bridge and see a Goliath, but no one will notice. The ship will stay stuck. Kill more automatic as it gets started and then have to escape the Goliath. You will see several houses. On the roof of a house on the left, you see Santa Claus and reindeer. Shoot them until they break for the Bells trophy. Finally, fighting all enemies that attack you during the rest of the way until the ship is destroyed and jumps another video sequence.

Chapter 6: City of the past

Walk into the station and follow the yellow symbol "R" written on the cars not to get lost. Having spent inside a car, you can find ammunition on the right inside of another. Go back to your main path and the car with the inscriptions "warning danger", go straight to get on the block. Enter the car to find a right audio diary. Continue forward by climbing the ladder to prevent jumpers. You also put your hands on a log Malikov. On the other side, lower the bridge to the doctor. Join him in the elevator. On the floor, go around to make ammunition and climb the ladder. At the top, pick up the musket, ammunition and a flight manual on the bed. Use the zipline to end the round.

Outside, fall into the hole in the ground. Pick up the newspaper on the shelf and open the gate flashing. In the dark, go for the atomizer. Use it when monsters wake up. Take the first stairs and battle the horde of creatures. Proceed to the second staircase to reach the top floor and head to the bridge. Turn around, kill monsters and go to the other side of the floor. Fall in the office to lower the command bridge. Take the ammo and the audio diary on the desk. Throw a grenade to blow the chimeras that await you on the other side.

Go back to the bridge and cross the floor. However, in contrast, is a newspaper. You could then if you want to avoid the monsters. Remember the next floor care kits as needed. Run to the stated objective to reach a tunnel. Down, open the door and move on. After seeing the two jumpers, turn left to get their hands on an audio diary. Continue to find a ladder. At the top, pull the sign down into another. On the floor, pick up the sniper rifle Chimeran. Position yourself near the window to find another audio diary. Shoot down the monsters outside on the roof.

Head down the next hole and pull the other panel to unlock the gateway. Take the ammunition in the kitchen and go down the hall. Kill all the jumpers who jump on you. In one room left on the floor, do not forget the letter to Santa. Push the plate down the hall and fall below.
Reply With Quote
#3
Old 30-09-2011
fumble's Avatar
fumble fumble is offline
Member

Join Date: Nov 2005
Posts: 260
Re: Resistance 3 PS3 Walkthrough, Tips and Cheats
Chapter 7: Contacts

After walking out the door the previous chapter, come down and begins this chapter. Will have left the factory, but your current mission is to ensure the VTOL and defend against attack chimera. Deadeye shooting with the leggy chimeras from a distance, goes down the zip line and the rest just to clean the area and meet with your new comrades. Then, see a craft and a devastating chimera. This huge enemy is covered, sometimes with a shield. When this happens, throw a grenade to check out. Then you avoid hits, covering you and shoot to defeat him and the other chimeras.

Enter the building and your mission is to defend against attack Blitzer Rush Pub. If you avoid that you enter the pub, you will receive the trophy Portero. To achieve this end with the hordes that assails you from both locations. It is best to use the sniper gun distance, spray the devastating Ara, plus grenades and Marksman, to its secondary function, among others. After overcoming the challenge remains to continue to sewers. Follow the path to get to the cache and, before leaving the sewers, go left to pick up the cross daily Tunguska.

Go up the stairs and the living room (office), will appear several chimeras and a brawler. Repeat the process last time, shot to the luminous parts (shoulders, wrists and chest. If you kill the Brawler in less than 2 minutes, you will receive the trophy Calm under pressure. After defeating all enemies, goes the way to go a ladder and see a cut scene.

Chapter 8: Plan

Free the drone in the truck and wait for it to emit its signal. Destroy it then. A shuttle arrives and crashes. A second and hybrids come attack you. No skin, they are protected by drones shields. Therefore, you must destroy the drones and then kill the chimeras. Reinforcements arrive with the skulls of irons. You can rest easy and shoot your opponents by being inside the building upstairs. When the fight promises to be bad for you, follow Charlie. Pick up the core at the bottom of the stairs and run without looking back. Follow the ally and listen carefully to his advice not to die stupidly. Back at the hideout, pick the folder on the vaccine Hale.

Chapter 9: Plan B

Charlie will tell you your goal. You have to avoid at all costs that Charlie dies, the kernel explodes. Charlie defends energy and the core fantasy of enemies will attack in the first place to stop, just chimeras with PLC and assault you (with the latest, best punch). Go forward and shoot the switch. Cross and be in the building. Go up the stairs to the right background, straying a little Charlie, to pick it up the stairs daily mass exodus. Return to Charlie and kill all the long-legged. Follow him on the ascent to eliminate most chimeras and finally, the target will change.

Your mission now is to flee in the gondola of the remains. Up on the conveyor and observes the scene. After the fall, you have to kill the widow to recover the energy core chimera. The best way is not to stop moving and shoot the weak spots illuminated from long range. Start by using Dead Eye, because during the fight, you pick up ammo for this weapon. Cross the first bridge to your left and collect the entire stay, whether the roof then using the zip as the basement, collecting more ammo and life. If you collect all Deadeye, you get the trophy hunting sniper. Finally, to eliminate the widowed, the best is, after crossing the first bridge and inside the building, stand in the corner, to avoid being hit by the acid. Shoot the orange weak spots (e.g. eyes) to kill the enemy. Skip a scene.

Trophy Guide for Ferrari: The Race Experience

2012-02-05T08:23:00.001-08:00

Tips & Strategies
This game is made for their opponents in every way race in the same car you are using. This means that in theory, no matter what car you are using, but not really mean much. First, it depends on what car you feel is best for you; I recommend the car can be garbage in their hands. Secondly, the AI in this game seems to be better in the control of slower cars in the corners, usually the faster the better. If the car does not work I recommend for you, try another until you feel is right, they are not all equal.

Glitches & Exploits
There are no tricks or exploits to my knowledge until now, but there are some technical problems. It's no secret that this game needs a little shine before being released, but no failures last hour. One of the mistakes I want to mention is that in a race that I was first 20-30 seconds, but suddenly I dropped to 2nd place (this was my last race in the classic race with maximum points, so I was not happy), but still remains second, he said when he reached the goal that has a first place and maximum points. If this happens to you all we can do is hope still get the 1st place.

Roadmap Guide

Enter the tutorial mode in single player to get hot and takes graduate so you get a feel for the game
Enter into showroom and buy the 512S.
When every time you buy a new car to get the Trofeo win all races in career mode with classical 512S. Trophy not ends up losing all of them at the end.
Win all races in career mode with classical 512S.
Now that you are a specialist with the 512S must be able to finish Arcade mode on it.
Purchase the Enzo or a similar car and win all the races in GT road.
Purchase car or similar FXX and win every race in the Carrera GT.
Now all the tracks must be unlocked so you can come and test time exceed 16 lap times with the 330 P4.
Just complete the Trofeo trophies
Now to the actually dull, get sufficient money to purchase all the cars in the game.

Guide to Trophy:
To take part in the trophy races, you have to initial buy the car required for the race. Cars can be obtained at the showroom in the main menu. Then you go to a single player -> Trophy to start Trophy race series. A trophy race consists of 3 races and provide you points after every race (30, 24, 20, etc) depending on their final position. In doing so, you get more money to buy additional cars. In the first race begins at the last position. Your target should be finished in 3 or above in the first race. If you do that, winning the final two races will ensure victory in the series of at least 2 points. In the second race and the third starts at the position you finished the last race in.

Trophy Races
Trofeo Rame:
Here you need to complete 1st position in the 348 Challenge Trophy Events.
Car: 348 Challenge
Price: 10,000

Trofeo Ferro
You need to Achieve 1st position in the 348 TB Trophy Events.
Car: 348 TB
Price: 5,000
Trofeo Perla
Complete 1st position in the F355 Challenge Trophy Event.
Car: F355 Challenge
Price: 15,000

Trofeo Topaz
Accomplish 1st position in the F355 Berlinetta Trophy Event.
Car: F355 Berlinetta
Price: 15,000

Trofeo Carnelian
Accomplish 1st position in the 360 Modena Trophy Events.
Car: 360 Modena
Price: 12,500

Trofeo Tourmaline
You need to complete 1st position in the F430 GTC Trophy Event.
Car: F430 GTC
Price: 31,250

Trofeo Malachite
Finish 1st position in the 550 Maranello Trophy Events.
Car: 550 Maranello
Price: 7,500

Trofeo Acciaio
Complete 1st position in the 575M Maranello Trophy Event.
Car: 575M Maranello
Price: 8,750

Trofeo Bronzo
Complete 1st position in the 575 GTC Trophy Events.
Car: 575 GTC
Price: 35,000

Trofeo Argento
Complete 1st position in the F40 Trophy Event.
Car: F40
Price: 27,500

Trofeo Oro
Complete 1st position in the F50 Trophy Event.
Car: F50
Price: 60,000

Trofeo Granato
Complete 1st position in the F333 SP Trophy Event.
Car: F333 SP
Price: 125,000

Trofeo Obsidian
Complete 1st position in the FXX Trophy Event.
Car: FXX
Price: 200,000

Trofeo Opale
Complete 1st position in the 365 GTB4 Comp Trophy Events.
Car: 365 GTB4 Comp
Price: 22,500

Trofeo Platino
Complete 1st position in the 512 M Trophy Event.
Car: 512 M
Price: 27,500

Trofeo Rubino
Complete 1st position in the 512 S Trophy Events.
Car: 512 S
Price: 25,000

Trofeo Zaffiro
Complete 1st position in the 250 LM Trophy Events.
Car: 250 LM
Price: 20,000

Trofeo Smeraldo
Complete 1st position in the 250 Tessarossa Trophy Events.
Car: 250 Testa Rossa
Price: 15,000

Trofeo Diamante
Complete 1st position in the 250 GTO Trophy Events.
Car: 250 GTO
Price: 17,500

Tutorial mode:

The Graduate
On The Graduate mode you should complete tutorial in First time.
Tutorial is in the single player option in the main menu. You have to drive two laps at the Fiorano Track. Trophy is unlocked after 2 rounds have been accomplished.

Hot Shot
On Hot Shot you should have 75% accuracy or more than 75% accuracy in Tutorial mode all four categories: use of brakes, throttle control, racing line accuracy and precision apex. They are allowed to use help in the tutorial, so using if you have trouble getting it and listen Tiff Needell.

Time Trial Mode

Italian Lap King
You should win the Lap Record on the entire Italian tracks in Time Trial mode.

Euro Lap King
You should win the Lap Record on all European tracks in Time Trial mode

North American Lap King
You should win the Lap Record on all North American tracks in Time Trial mode

Time Trial Lap King
You should win the Lap Record on every track in Time Trial mode.
First, is required to release all tracks. To this end, finishing in the top 3 on the track in Career mode. You can also unlock the Tracks to do this in Trophy races. In complete contrast to Ferrari Challenge, the time trials are difficult in this game. You have to beat all the Tracks of time back with the same car. The best car for time trials using the 512S. Infineon track has a very hard time with this car too, but it remains the best car in general to get this trophy. There are other tracks like Mugello, Silverstone and Virginia, which also will be difficult with this car, but not as hard as Infineon. If you can get this trophy, the rest of the trophies should be a breeze. Thanks to M1L3AG3 for this advice.

Arcade Mode

How to remove Hijacker

2012-02-05T08:22:00.002-08:00

A Hijacker is any software that resets your browser's settings to point to other sites. Hijacks may reroute your info and address requests through an unseen site, capturing that info. In such hijacks, your browser may behave normally, but be slower. Search Hijackers change your search settings. Homepage Hijackers will change your home page to some other site. Error Hijackers will display a new error page when a requested URL is not found. Hijacking has become very common, as these guide illustrate. This guide explains how to clear such hijacks of Microsoft Internet Explorer (IE) manually and how to prevent it by disabling scripting.

Search Hijacks
If your Search capability has been hijacked, your use of IE's Search Button (see below) will lead to unexpected (and usually unwanted) results.
What the hijacker has done is to change four registry keys:
Quote:
1. In the Root key HKEY_CURRENT_USER, the key Software\Microsoft\Internet Explorer\Main has a value "Search Page" that has likely been reset to something like "http://www.secret-crush.com/search/search.php"
2. The value "Search Bar" in this key has also likely been reset to something.
3. In the Root key HKEY_LOCAL_MACHINE, the key Software\Microsoft\Internet Explorer\Search has a value "SearchAssistant" that has likely been reset to something
4. The value "CustomizeSearch" in this key has also likely been reset to something.

Fixing this is simple. From IE's top menu bar, select the Tools menu. On this menu, choose "Internet Options". It will display a popup dialog box. Click on the Programs tab, to see a display like that on the right.

Find the button near the bottom labeled "Reset Web Settings". Give it a click, and these four registry settings will be corrected.
Last edited by devilish : 21-09-2005 at 09:11 PM.
Reply With Quote
#2
Old 21-09-2005
devilish's Avatar
devilish devilish is offline
Member

Join Date: Mar 2005
Location: Mera Bharat
Posts: 5
HomePage Hijacks - How to remove Hijacker
If your Home page changes unexpectedly, you have a "HomePage hijack", and will see this page each time you invoke your browser. What the hijacker has done is to change the registry key:

Quote:
* In the Root key HKEY_CURRENT_USER, the key Software\Microsoft\Internet Explorer\Main has a value "Start Page" that has likely been reset to something.
* In the Root key HKEY_LOCAL_MACHINE, the key Software\Microsoft\Internet Explorer\Main has a value "Start Page" that has likely been reset to something like http://yourbookmarks.ws/
Fixing this seems simple, but some pests make repair a bit more difficult. For instance, CWS.Bootconf sets the first of these entries to http://%77%77%77%2e%63%6f%6f%6c%77%77%77%73%65%61%72%63 %68%2e%63%6f%6d/%7a/%61/%78%31%2e%63%67%69?%36%35%36%33%38%37 This is "encrypted"; its decryption works out to http://www.searchv.com/
Reply With Quote
#3
Old 21-09-2005
devilish's Avatar
devilish devilish is offline
Member

Join Date: Mar 2005
Location: Mera Bharat
Posts: 5
cool Disabling Scripting: How to remove Hijacker
IE supports "scripting", a useful but dangerous capability that you will want to disable if you ever visit unknown sites. The scripts that can be run will be Javascript or VBScript, often embedded in a web page you visit. Such scripts can execute ActiveX controls, which can do anything in your machine that any software can do.

To be stop scripting the easy way, do this: From IE's top menu bar, select the Tools menu. On this menu, choose "Internet Options". It will display a popup dialog box. Click on the Security tab, to see a display like that to the right.

Each zone has four security levels available, ranging from Low Security to High. IE is configured for Low Security when it is first installed. Medium or High is what you need.

Quote:
* High (most secure) Exclude content that could damage your computer.
* Medium (more secure) Warn before running potentially damaging content.
* Medium-Low (Same as Medium) No warning before running potentially damaging content.
* Low Minimal safeguard and warning before running potentially damaging content.

For the Internet Setting, move the slider to "Medium" This will ensure that you are prompted before signed ActiveX controls are run, and unsigned ActiveX controls will not run.

But it will still allow active scripting. So click on the "Custom Level" button, and follow these instructions:

Configure IE so that it does not run Active scripts automatically:
Quote:
* On the Tools menu, click Internet Options, click the Security tab, click the Internet Web content zone, and then click Custom Level.
* In the Settings box, scroll down to the Scripting section, and click Disable under Active scripting and Scripting of Java applets.
* Click OK, and then click OK again.
Configure IE so that it does not automatically use items that show active content, such as vertical marquees or animations:
Quote:
* On the Tools menu, click Internet Options, click the Security tab, click the Internet Web content zone, and then click Custom Level.
* In the Settings box, click Disable under Download signed ActiveX controls, Download unsigned ActiveX controls, Initialize and script ActiveX controls not marked as safe, Run ActiveX controls and plugins, and Script ActiveX controls marked safe for scripting.
* Click OK, and then click OK again.
Verify that IE's internal Java Just-In-Time (JIT) compiler is disabled:

Quote:
* On the Tools menu, click Internet Options, click the Advanced tab, and then click to clear the JIT compiler for virtual machine enabled (requires restart) check box under Java VM.
* Click OK.
Configure IE so that it does not run Java programs automatically.

Quote:
* On the Tools menu, click Internet Options, click the Security tab, click the Internet Web content zone, and then click Custom Level.
* In the Settings box, click Disable Java under Java Permissions, click OK and then click OK again.
complied from pestpatrol logs
Reply With Quote
#4
Old 01-10-2005
GunshotSilence

Posts: n/a
Re: How to remove Hijacker
well i guess i know whats the prob.

since i upgraded to ZA sec suite 6.67.00, its installation crashes due to some dll lib problem

see http://forum.zonelabs.org/zonelabs/b...ssage.id=40246

now im reinstalling the previous version 6.66. which worked fine 1 whole month since download only gave probs recently when it connected to dataone but no data transfer.

Customizing Windows XP with nLite

2012-02-05T08:22:00.000-08:00

) First, copy the entire contents of your copy of Windowsxp a local folder of your choice and rename it as you want.

2) Install DotNetFramework 2.0 in the order to run nLite. Use UltraISO or Nero, depending on your choice, there are other 1000 software for an ISO burning or changing ISO contents without loosing the booatble capabilty... I recommend UltraISO.

3) Start nLite selecting the English as the default language. The first screen you will see nothing, click on next and the screen will be filled with configuration files. These are nothing but files containing all the values you changed. You will need these later as its very useful if you want to take back for future changes in settings.

4) Well, Open nLite and point it where we have our copy of WindowsXP saved. Select via the Browse button, the exact path of the folder created in step 1 so as to understand where nLite to reside all the files on Windows the program will check the i386 folder

5) We have reached the heart of the program, according to the screen where you may need to select all or most of the possible items for a perfect modding. Each has a specific and precise task and nLite will perform these operations following an order from top to bottom.

6) In the first screen you can integrate the latest service pack. Simply, once downloaded the package, select the entry in nLite and add it using the Browse button.
Note 1: It is highly recommended that INTEGRATE SP3!
Note 2: If you integrating SP3 do not integrate any other previous packs, as SP3 has every patch within it.

7) The next option allows the easy integration of all hotfixes (critical and otherwise) issued by Microsoft. Even here you can simply click on the Browse button to move to the folder where they reside all hotfixes and then add them saved through nLite.

You can also integrate programs and Patches which are in CAB format!

********************************************************
Tips For Integrating Updates and Hotfix
********************************************************

A) A preferred method and sure method to have all the hotfixes needed is to install Winxp, do a scan with Windows Update and, once the pop-up list of hotfixes to download, copy all the names of files downloaded in a folder and only then consolidate them with nLite.

********************************************************
Latest DirectX Update
********************************************************

Last update August 09

********************************************************
CAB
********************************************************

With nLite, you can also incorporate self-extracting programs, programs added by users in a completely unattended installation disc. These programs will have .cab extensions most of the time. You can start by creating self-extracting archives with WinRAR and then select the archive as a cabinet file. This is for those who want to use the classic method of Nlite.

*******************************
Other Tips
*******************************

Tip 1
Integrate packages like dotnetframework, Windows installer,etc with Windows [Updated]

Tip 2
Integrate Programs that you use commonly like winrar, office, firefox, etc depending on which one you use regularly.

Some programs can be difficult to install or customize in silent mode, so be careful with them.

Integrate these software : [Optional]

* Acrobat reader

* Antivirus Software

* ADOBE - Shockwave and Flash player

* Windows Media Player 11

* INTERNET EXPLORER 8

Another good method of integration programs is called RunOnceEx. The method is very easy to follow and integrate, and unlike the cab, allowing for updates on programs simply replace the exe with the updates without having to recreate the entire ISO as with the cab. A point against instead is that the method is not totally silent but it masks dos until the end of the installation of programs. This method is used by OEM Manufacturers.

***************************
Integrating Driver
***************************

8) On the next screen of nLite, you can integrate any type of driver. Just go through the usual browse button to find the inf file on your disc or insert entire folders with all your drivers and you're done, the rest will be taken care by nLite.

9) Following step shows the possibility of eliminating all you want, or what is unnecessary for the purpose of your copy of Windows. But be careful what you remove, you will risk in some cases be unable to complete the OS installation or malfunction found over time such as inability to run certain applications.
Note : Do not delete the items highlighted by the red color, are vital to the OS which nLite suggest not to uninstall.

10) In Pre-installation information, nLite can reduce the interaction or even completely eliminate it during installation of the OS. This can be achieved by moving to the next screen, there you can set various parameters such as: Product Key which will be automatically typed, disable firewall, set the network settings automatically etc. When you set the unattended options winnt.sif, a very important file is created in which all the changes that you have set are saved.

11) Additional and important options found in the next screen where you can set the priority of services that the OS loads at startup. You can tweak this according to your needs

12) Now you have reached the last screen, where nLite will allow you to automate certain settings of your operating system. You can delete some of them which you feel are not necessary such as sounds, icons from your desktop, toolbar and so on, choose according to your needs...

13) Here we go, just select if you want to burn the image or save the ISO of the new tweaked OS, at this point i recommend you save an ISO too if you just plan to burn the image.

14) Save the image, Burn it to the Disc and Have Fun...
Reply With Quote
#2
Old 17-05-2011
Ajooba AB Ajooba AB is offline
Member

Join Date: Apr 2011
Posts: 56
Re: Customizing Windows XP with nLite
I'm fascinated by your tremendous tutorial. I definitely would like to try it. If I'm building a fresh computer through a blank hard disk and install XP in the company of Service Pack 2 to begin, how be supposed to I proceed? Of course, I have a PC that presently used. How do I organize the ISO nLite on the present computer and after that burn the ISO to a CD and then utilize the CD to install on my new PC? Please share your knowledge with me thank you.
Reply With Quote

Top 3 ways to block websites for you

2012-02-05T08:21:00.001-08:00

-1. Modify the windows hosts file
Step 1.
Locate your HOSTS file. The hosts file is located in different places depending on your Windows version.

For XP/VISTA it is located in the C:\WINDOWS\SYSTEM32\DRIVERS\ETC directory.

For 2000 it is located in the C:\WINNT\SYSTEM32\DRIVERS\ETC or C:\WINDOWS\SYSTEM32\DRIVERS\ETC folder, depending on the nature of your Windows install

Step 2.
To view the contents of this file, browse to the location of the file and double click on it. You will be asked whether you want to search the internet for a program to open the file or if you wish to choose from a list. Choose the list option and open the file with Notepad. You can now view all of the websites that are being blocked.

Step 3.
To manually block a site, go to the bottom of the file and on a new line type “127.0.0.1 siteyouwanttoblock.com” without using quotes. This will block siteyouwanttoblock.com. Repeat the process for any other sites you wish to block, and then save the file by going to File>Save.

--2. Use OpenDNS

If you want to filter what can and can NOT be seen on the Internet, you can use OpenDNS. Schools and government office use it… and its free.

Warning: With above two porn filtering methods, you can still visit websites you blocked with a web proxy. To completely block websites, you may need a professional Porn Filter.

Completely Porn filtering method:

--3. Use a professional Porn filter

The best method is to use Porn Filter, for example, Aobo Porn Fiter to block unwanted websites and filter porn websites on your computer.

Porn Filter works with all popular web browsers. It can:
Filter porn web sites automatically
Running in stealth and undetectable mode
Blocks all porn web sites before they loaded to web browsers
Password protected, so that no one can bypass the blocker
To get a website unblocked by Aobo Porn Filter. You can easily add it to the Porn Filter White List.
Reply With Quote
#2
Old 31-12-2010
Solomon's Avatar
Solomon Solomon is offline
Member

Join Date: May 2008
Posts: 4,056
Re: Top 3 ways to block websites for you
You can also use the IPSEC/Firewall blocking features. This is the most pervasive blocking usually performed by far. IPSEC filtering can be deployed via group policy to individual computers or can be deployed to the network's internet gateway for blocking at the networks perimeter. IPSEC rules are extremely customizable, and essentially allow any protocol (http, ftp, etc...), on any port (sender or receiver), on any IP address to be filtered.
Reply With Quote
#3
Old 07-01-2011
rajivkv rajivkv is offline
Member

Join Date: Nov 2010
Posts: 45
Re: Top 3 ways to block websites for you
How to unblock, which are blocked(like downloads)by firewall(not windows firewall...3rd party firewalls)
Reply With Quote
#4
Old 14-10-2011
timy1962 timy1962 is offline
Member

Join Date: Oct 2011
Posts: 1
Re: Top 3 ways to block websites for you
How do I block using windows 7
Reply With Quote
#5
Old 14-10-2011
EINSTEIN_007's Avatar
EINSTEIN_007 EINSTEIN_007 is offline
Member

Join Date: Dec 2007
Posts: 1,897
Re: Top 3 ways to block websites for you
Quote:
Originally Posted by timy1962 View Post
How do I block using windows 7
You can try to install Family Safety Filter and choose your children’s web filtering level to block a particular website if you want. When you first set up the Family Safety Filter, your child's web filtering level is automatically set to basic. You can change it to strict or custom, and block or allow specific webpages or websites.
__________________
Education, Career and Job Discussions

From Dust PC Walkthrough, Tips and Hints

2012-02-05T08:20:00.003-08:00

In "From Dust" will be a strain on a planet that is reminiscent of an inhospitable version of Earth. Where in other games bosses are, one must engage in "From Dust" on a trial of strength with nature, because in the game all the time does not heal wounds, but degraded the habitat of the inhabitants of the planet. In a primitive stage of civilization, it is necessary to make the resistance forces of nature in order to make yourself stable. Players may almighty God to nature as one act, for example, to divert a lava flow, lower mountains or put out fires. Any decision must be well planned, as they impact on the environment and thus could have on the whole tribe. The player's goal is to regain the lost knowledge and the powers of his ancestors. These gifts were buried by a natural disaster.

The gameplay is reminiscent of "Black & White" (gods simulation). "From Dust" due for release this year - but only through Steam.

Features:

Groundbreaking Technology: Play in the sandbox of one of the most advanced real-time nature simulations, where everything you see and interact with evolves dynamically, offering a constantly renewed experience.
Unique Art Direction: Discover a large variety of environments: Tropical islands, volcanic landscapes, deserts, and so much more!
Rich Story Mode: Explore 13 breathtaking territories of emergent gameplay. Master the natural forces at play on a mysterious archipelago and help a primitive tribe recover the lost powers of their ancestors.
Confront Mighty Nature: Protect your tribe against Nature's most devastating attacks. You'll be faced with tsunamis, wildfires, earthquakes, volcanoes, torrential rains, and more!
Master Godlike Powers: Control the forces of nature and sculpt the world in your image. Hold back lava, stop raging waters, empty lakes, grow forests, and raise mountains!
Live Up to the Challenge: Race against the clock on 30 additional maps in Challenge mode. Each scenario is a puzzle-like challenge where time is of the essence.
Online Leaderboards: Compare your Challenge mode scores with the community on worldwide Leaderboards.

Worlds in From Dust:

The Coral Plant: Regularly, the fire would ravage a valley. One scrawny plant managed to hide in the earth. There, its roots imprisoned the breath of fire, which enveloped the plant with a fireproof hide. The coral plant grows on the naked earth, but does not encroach upon other vegetation. It will not grow on water or rock. Fire is extinguished upon contact with it.

The Palm Trees: The first animals came into existence on a new island. But there was nothing but the earth, arid and barren, and that is why they all perished. As soon as the palms grew, the animals prospered and men settled in. The palms grow on the naked earth but do not encroach on other vegetation. It will not grow on either rock or water. It is inflammable.

The Prickly: The earth created the islands, on which the sea constantly nibbled until none remained. So life gave the earth "the prickly." The plant covered the islands with a blanket insensitive to the assaults of the sea, but so barbed that all other forms of life would become its prisoners. The prickly grows on the naked earth but does not encroach on the other plants. It does not grow on water or rock. The fire consumes it. It stops men and animals alike, except for the destroyer who can charge right through the prickly.
Reply With Quote
#2
Old 14-10-2011
racer's Avatar
racer racer is offline
Member

Join Date: Mar 2005
Location: Portland, OR
Posts: 316
Re: From Dust PC Walkthrough, Tips and Hints
Walkthrough:

The breath:

You are a god protector of a primitive tribe that follows in the footsteps of the old in search of knowledge and evolution. Your goal is to establish in new locations discovered by men of the tribe. You must face the forces of nature to tame and manage to keep alive your worshipers. You must follow the prompts to familiarize yourself with the controls. Begin by keeping the button pressed to create the indicated breath.

Once created the breath, the men trying to reach the passage. The sea has cut the path to the passage and you must help the villagers to reach their destination. Then use the breath to pick up the land that is to the right and spread it on the submerged part of the way to allow villagers to move forward. Once at the transition, the villagers are waiting for your arrival to cross the passage. Then hold the breath on the way and press the button shown to cross.

The ritual:

In this place, you have a totem left by the ancients. You can build a village around these totems by calling the tribe for the latter. Start by using the breath to create a land bridge to the totem. Select it and press the button to call the men said. You need five people to use the pole and base village. If the area is quite large around the totem, then all men can build a village around it. The transition is currently closed. To open it, you must build villages on each pole of the island. Locate then the second symbol which is partially submerged under water. Have used the breath to draw water and subsequently rejected in the sea

Then use the earth to make your way into the sea to the totem and call men to build a village. Then send a man to the fragment of memory that is north of the second village. The vegetation is spreading around the villages where it There's the land. Then place the land on rock surfaces and link them with the green lands to spread the flora and fauna. If you propagate more vegetation, you increase the gauge to the left. New animals will then appear and tales of the tribal memory will be revealed. Now that each totem is repopulated, the switch is open. Before leaving, you can continue to propagate vegetation on the islands using land that is located right near the water source. Set then a land bridge to the passage and call men to the latter.

The cry of the sea

In this chapter, you will get to know the tsunami that ravaged the ratings on a cyclical basis. Start first by establishing the first village. Since its construction, make sure to protect against tsunami that will soon happen. You must reach the stone of knowledge that contains the information "push water" to preserve the village. This stone is at the bottom of the mountain, between the water sources. Send a man to the stone and prepare him the way. Then go to the dunes that are located near the mountains and water sources and harvest of the earth. Use it to create a path between the island where the village and the part that is north. Block and then change the course of the third source of water that passes in front of the stone using sand. Once the knowledge acquired, the village will survive the tsunami.

Then enjoy the time out to reach and repopulate the next totem. The latter is on the right before the fourth source of water. You must change the course of this fourth source, forming a dam that displaces the water right. Use sand that is on the right side of the mountain to form your dam. Join the second totem and build a village. Now you need to reach the passage that is engulfed in a pool. Start by creating a breach in this pool of dune forming a passage for the water left. The level of the pond water will then decline. Create a second bridge between the village and the area of the passage and then suck the remaining water in the basin so that people can borrow.

How to Install the SAS hard disk drive

2012-02-05T08:20:00.001-08:00

Disk drives for Serial-Attached SCSI (SAS) is distinguished by easy installation procedure. To ensure proper operation of these drives, you don't need to install any jumpers, terminators, or other settings.

Each disc is equipped with a SAS interface separate cable that connects to the host adapter or controller, SAS. With some types of controllers, SAS can use cables to connect multiple devices (or port replicator). Unlike disk drives (Parallel) SCSI, in this case there is no need to assign identifiers, as each disk is connected to a single port and all the identifiers assigned by the controller.

SAS drives can be used simultaneously with SCSI or Serial ATA (SATA), if the motherboard and the host adapter supports both of these interfaces. Moreover, in the presence of suitable ports can be connected to the disk controller SATA drives along with SAS (but drives SAS, connected to the controller SATA, will not work).

BIOS configuration

In most modern computers through the system setup program (CMOS or BIOS) device discovery is done automatically. When the system starts happening automatically recognize the disc, and, as a rule, the screen displays the model number. Model numbers Seagate hard drives begin with the letters ST.

Note: Sometimes the BIOS SAS-controller has its own configuration utility system, which is absent in the standard BIOS on the motherboard. In this case the model number of SAS drives will only appear in the message SAS BIOS. For more information about configuring the BIOS settings for the disk contained in the SAS documentation for your motherboard or controller SAS.

Important: Special note for users of RAID-host adapter. For many RAID-HBA with SAS interface you want to assign the disk to the array to the operating system to work with the disk. For information on the appointment of the disk to the array controller, see the documentation for the SAS.

Other recommendations : Make sure that the SAS channels are included. In most of the system BIOS setup utility there is a possibility to disable port SAS. If the controller does not detect the disk, make sure that all ports of SAS included.

Precautions / protection from electrostatic

Hard drives are fragile products. Keep the disk from shocks and jolts. Take a drive by its edges case.

Electronics drive is extremely sensitive to static electricity. To keep the installation disc in antistatic packaging. Put the cuff contact with the ground pin. Make sure that contact with the drive elements do not have static electricity. Do not use an ohmmeter to the circuit boards.

Use caution when working with equipment, is under stress.

Do not disassemble the drive, otherwise the warranty will be void.

Drive for warranty replacement should be returned to the collection, even if only a few defective items.

Do not push and do not attach a label on the circuit board or on the top cover of the disc.

Installation Instructions

1. Attach the drive on a stand or tray.

Most of the systems that support the interface of SAS, equipped with trays or holders for the drive, which allows you to drive "on hot".
Attach the disc in the tray or pedestal using the four mounting screws 6-32 UNC. Do not tighten the screws too much. The disc can be installed both horizontally and vertically.

Note. To connect SAS drives do not require cables and cable interfaces. However, you can connect the drives and using high-quality cables up to 4 meters (cable interface).

2. Installation CD

Install tray or stand in the appropriate compartment of the system. Thus the disc are connected to SAS. Connector SAS, usually located on the rear panel.

Note. Installing the drive is carried out without the jumpers and terminators. Power supply via plug SAS.

3. Formatting disk

Disk comes formatted at a low level. Perform low-level format once again not required, except in cases of diagnostic controller. The process of low-level formatting can not be interrupted, as this may damage the disc. Low-level formatting takes up to 1,5 hours for models ST3146854SS, 1 hour for models ST373454SS and 30 minutes for models ST336754SS.
Provide protection in case of power failure and blackouts during formatting.

You can also use the software Seagate SeaTools for DOS, to perform a full format. But we should remember that this tool can not work with drives connected to RAID-array.

Warning: Formatting a disk destroys all data. This should be taken into account at the start of formatting. Disks on which information is stored, it should be formatted only if you intend to delete all data. Seagate is not responsible for any loss of data.

Operating Systems

Cheetah drives are compatible with different operating systems. Information on formatting and preparing the hard drive to work in a particular operating system is contained in the user manual OS or host adapter (controller) SAS.

Hot-swap disk

Hot Swap feature allows you to install and remove the drive without powering down the system.

Parameters promotion drive

Run the disk depends on the system parameters that determine the sequence of promotion drive. In most systems, with only the two drives, promotion starts immediately after power to the wheels. Systems with large numbers of drives can be configured so that the wheels are included at different times. This allows the system to avoid overloading the computer's power.

Information about how to change the startup disk options is contained in the documentation that came with your computer or host adapter SAS.

To install a SAS hard disk drive, complete the following steps:

1. Read Safety and the Installation guidelines.

2. Shut down the operating system, turn off the blade server, and remove the blade server from the BladeCenter® unit. See Removing the blade server from a BladeCenter unit.

3. Carefully lay the blade server on a flat, static-protective surface, with the cover side up.

4. Open and remove the blade server cover. See Removing the blade server cover.

5. Locate the SAS connector for the hard disk drive.

6. Install the appropriate drive.

* Install the front SAS hard disk drive:

1. Unlatch the bezel to increase the ease of installing the drive. (You do not have to remove the bezel.)

2. Place the drive into the hard disk drive tray and push it toward the rear of the blade, into the connector until the drive moves past the lever at the front of the tray.

Attention: Do not press on the top of the drive. Pressing the top might damage the drive.

3. Latch the bezel.

* Install the rear SAS hard disk drive:

1. If a standard-form-factor expansion card is installed in the rear drive SAS connector 1 location, remove the expansion card, remove the expansion card and its mounting bracket, and save the screws that secure the tray to the system board. Store the screws in a safe place.

2. Secure the SAS connector drive tray to the system board with the screws from the option kit.

3. Place the drive into the hard disk drive tray and push it toward the rear of the blade, into the connector until the drive moves past the lever at the front of the tray.

Attention: Do not press on the top of the drive. Pressing the top might damage the drive.

7. Install and close the blade server cover.

Troubleshooting

Problem: The drive does not spin up.

Remove the disc, re-secure it in a tray or on a stand and reinsert into the bay for a hard disk. Make sure that the disk is not broken contact with the connector SAS on the back of the device.

Check your startup disk, installed on the host adapter.

If possible, install the drive in another bay or use a different port.

Try to connect to the same port or set in the same compartment of another disk.

Problem: The computer can not recognize the disc.

Make sure that the disk included with the configuration utility HBA SAS.

If so, then the controller recognize the disc. Verify that the SAS controller drivers loaded correctly. Instructions for downloading drivers controllers, see the documentation for the controller card.

When you install the operating system on the hard drive should boot from the CD-ROM of the operating system and press F6, when requested (usually such a request remains on the screen a few seconds.)

Installing Windows 2000 or XP: Further, the installation proceeds normally, and the screen will display all the standard message, but then the screen to install drivers for the main processor bus adapter (HBA) or controller.

Installing Windows Vista: Click Load Driver, when it will be offered. The procedure described above with pressing F6 may be required or not required depending on specific conditions.

Reply With Quote
#2
Old 21-05-2011
Virtuous Virtuous is offline
Member

Join Date: Jan 2010
Posts: 441
Re: How to Install the SAS hard disk drive
I was facing a issue of not detecting of the sas disk. For that you must recheck the connection of many SAS disk on motherboard ASUS P6T Deluxe X 58, 6 ports for serial ATA are supported by the Northbridge and two other ports are managed by Marvell chip that supports the disc pack ONLY SAS. If you checked the SAS drivers were available for loading at startup when you boot from the DVD 7.
Reply With Quote
#3
Old 14-10-2011
mantik mantik is offline
Member

Join Date: Oct 2011
Posts: 2
Re: How to Install the SAS hard disk drive
Hello,

I have mail server with 3 hardisk SAS system, but after unplug and plugin again can not running. (operating system not found)
how to check for harddisk position 0-3, maybe wrong slot or ID setting
Reply With Quote
#4
Old 16-10-2011
brassin

Posts: n/a
Re: How to Install the SAS hard disk drive
Disk drives for Serial-Attached SCSI (SAS) is distinguished by easy installation procedure. To ensure proper operation of these drives, you don't need to install any jumpers, terminators, or other settings.

Each disc is equipped with a SAS interface separate cable that connects to the host adapter or controller, SAS. With some types of controllers, SAS can use cables to connect multiple devices (or port replicator). Unlike disk drives (Parallel) SCSI, in this case there is no need to assign identifiers, as each disk is connected to a single port and all the identifiers assigned by the controller.

SAS drives can be used simultaneously with SCSI or Serial ATA (SATA), if the motherboard and the host adapter supports both of these interfaces. Moreover, in the presence of suitable ports can be connected to the disk controller SATA drives along with SAS (but drives SAS, connected to the controller SATA, will not work).
Reply With Quote
#5
Old 17-10-2011
mantik mantik is offline
Member

Join Date: Oct 2011
Posts: 2
Re: How to Install the SAS hard disk drive
where is Usually for operating system (HDD #0 ? or last number #3).
I have 3 slot HDD, but I don't know where is HDD #0 or #1 / #3 before.
so after plug in (no operating system).
Thank you
Reply With Quote
#6
Old 18-10-2011
chuck28 chuck28 is offline
Member

Join Date: Jul 2011
Posts: 190
Re: How to Install the SAS hard disk drive
I will recommend you to go through the below manual which can guide you in more detail way. The setup is bit complicated, but with the help of manual you can properly configure the same. You have to manage the same from gui interface. If possible try to find the manual of your system. There can be chances that settings might differ system to system.

SAS Setup Manual

How to make your iPod Touch / iPhone Working in Windows 7 64-Bit

2012-02-05T08:19:00.003-08:00

You will need following software:

Download the latest iTunes 64-Bit release from apple.com
Installed copy of iTunes on a Vista x64 system available to you
Basic knowledge of installing drivers in Windows

Ok, so first off, you obviously need to install iTunes. Install it as you normally would and let it do it’s thing. Once you have done that, you will notice the following error if you try to start iTunes with your iPod Touch plugged in:

The reason this happens is because the iTunes installer does not install the Mobile Device Support component which is necessary for the iPod Touch to work correctly. To remedy this issue do the following:

Copy the “Mobile Device Support” directory from your Vista system to the same location on your 7 system (Located in C:\Program Files (x86)\Common Files\Apple\).
Once you have done that, we need to merge the appropriate registry entries so the services actually work. Merge THIS registry file and allow all UAC prompts.
Once that is done, now we need to move on to the hardest part of the whole process. Installing the correct driver for the iPod Touch. Windows 7 incorrectly sees the device as a digital camera, so we need to fix this manually. To do this head into the device manager and select the iPod (see screenshots below).

Once you have done that, right click and go to “Update Driver”. You will now see this:

Select “Browse my computer for driver software”. Now you should see this:

Click the button highlighted (hint: it’s the Let me pick… Button).

When the prompt comes up, click have disk and navigate to C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers\

After doing that click OK and you should see this:

Click Next and the driver will install.

Finally, reboot your computer to allow the Mobile device service to start, and plug in your iPod Touch and fire up iTunes. Your device should now work exactly as it should. Enjoy!

Source: chris123nt.com
Reply With Quote
#2
Old 22-01-2010
mel02 mel02 is offline
Member

Join Date: Jan 2010
Posts: 1
Re: How to make your iPod Touch / iPhone Working in Windows 7 64-Bit
hey,
i got windows 7 64-bit and keep getting the same error mentioned in your post...

i tried what you said to do... and im still getting the same thing -
iphone isn't even being recognised now.

Any suggestions?
=)
Reply With Quote
#3
Old 22-01-2010
shilpaworld

Posts: n/a
hi
Recently while i was searching for the applications for my ipod touch I found a cool application that makes your Ipod Touch like like an Iphone.This applications will add the Iphone icons to your Ipod touch like Phone,SMS,camera and other icons including a fake network signal bar.
Reply With Quote
#4
Old 12-02-2010
Daejin3 Daejin3 is offline
Member

Join Date: Feb 2010
Location: Seoul, Korea
Posts: 1
Post Re: How to make your iPod Touch / iPhone Working in Windows 7 64-Bit
This sounds OK, but what can you do if you are migrating from WinXP (32) to Win 7 (64) and you wish to synch your iPod Touch with iTunes? Thanks.
Reply With Quote
#5
Old 16-03-2010
kelsiu kelsiu is offline
Member

Join Date: Mar 2010
Posts: 1
angry Re: How to make your iPod Touch / iPhone Working in Windows 7 64-Bit
I spent 2 hours on the phone with an itunes tech assistant and they even sent me to their engineering department but no luck. this really sucks.
Reply With Quote
#6
Old 26-04-2011
CimbaDiablo CimbaDiablo is offline
Member

Join Date: Apr 2011
Posts: 1
Re: How to make your iPod Touch / iPhone Working in Windows 7 64-Bit
dude this worked for my itouch, i had to paste the files in there. thankyou so much couldnt figure out what to do, had to extract files to get itunes on x64 bit windows as well so it was one prob after the other. anyways thanks for posting. peace
Reply With Quote

Unlocking Guide for Nokia Phone

2012-02-05T08:19:00.001-08:00

Then company which sells the mobile phone, they lock the phone before releasing it for the User. These locked phones cannot be used with the any other network. Even if you insert the another SIM (Subscriber Identity Module) card to the phone, the phone cannot be used until you enter the unlock code for the phone. Phone unlocking is need for the people who are traveling from one country to another, to use the pre-paid SIM Card of that country.

Generally the Service Provider is having the Unlocking code for the phone but they ask for some charges for providing the same.

Here I have decided to give you the step by step guide for the unlocking the latest Nokia phone so that most of the people looking to get the unlock code find it helpful.

Nokia X2:

First I am starting with the Nokia X2 phone which is the latest phone of the Nokia:

Switch off the Nokia X2 Phone and take out the SIM Card
Start the Nokia X2 without SIM card
Ignore the message on Nokia X2
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia X2 phone is Unlocked

Note : If you are using the Nokia X2 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.
Reply With Quote
#2
Old 05-10-2010
Andrew's Avatar
Andrew Andrew is offline
Member

Join Date: Nov 2005
Posts: 524
Re: Unlocking Guide for Nokia Phone
Nokia N8:

Switch off the Nokia N8 Phone and take out the SIM Card
Start the Nokia N8 without SIM card
Ignore the message on Nokia N8
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia N8 phone is Unlocked

Note : If you are using the Nokia X2 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia E5:

Switch off the Nokia E5 Phone and take out the SIM Card
Start the Nokia E5 without SIM card
Ignore the message on Nokia E5
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia E5 phone is Unlocked

Note : If you are using the Nokia E5 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia C6:

Switch off the Nokia C6 Phone and take out the SIM Card
Start the Nokia C6 without SIM card
Ignore the message on Nokia C6
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia C6 phone is Unlocked

Note : If you are using the Nokia C6 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia C3:

Switch off the Nokia C3 Phone and take out the SIM Card
Start the Nokia C3 without SIM card
Ignore the message on Nokia C3
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia C3 phone is Unlocked

Note : If you are using the Nokia C3 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia C5:

Switch off the Nokia C5 Phone and take out the SIM Card
Start the Nokia C5 without SIM card
Ignore the message on Nokia C5
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia C5 phone is Unlocked

Note : If you are using the Nokia C5 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.
Reply With Quote
#3
Old 05-10-2010
Andrew's Avatar
Andrew Andrew is offline
Member

Join Date: Nov 2005
Posts: 524
Re: Unlocking Guide for Nokia Phone
Nokia 6303i Classic:

Switch off the Nokia 6303i Classic Phone and take out the SIM Card
Start the Nokia 6303i Classic without SIM card
Ignore the message on Nokia 6303i Classic
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 6303i Classic phone is Unlocked

Note : If you are using the Nokia 6303i Classic phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia X6 16GB:

Switch off the Nokia X6 16GB Phone and take out the SIM Card
Start the Nokia X6 16GB without SIM card
Ignore the message on Nokia X6 16GB
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia X6 16GB phone is Unlocked

Note : If you are using the Nokia X6 16GB phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 2710 Navigation Edition:

Switch off the Nokia X6 16GB Phone and take out the SIM Card
Start the Nokia 2710 Navigation Edition without SIM card
Ignore the message on Nokia 2710 Navigation Edition
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 2710 Navigation Edition phone is Unlocked

Note : If you are using the Nokia 2710 Navigation Edition phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 5235 Music:

Switch off the Nokia 5235 Music Phone and take out the SIM Card
Start the Nokia 5235 Music without SIM card
Ignore the message on Nokia 5235 Music
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 5235 Music phone is Unlocked

Note : If you are using the Nokia 5235 Music phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 7230:

Switch off the 7230 Phone and take out the SIM Card
Start the Nokia 7230 without SIM card
Ignore the message on Nokia 7230
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 7230 phone is Unlocked

Note : If you are using the Nokia 7230 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.
Reply With Quote
#4
Old 05-10-2010
Andrew's Avatar
Andrew Andrew is offline
Member

Join Date: Nov 2005
Posts: 524
Re: Unlocking Guide for Nokia Phone
Nokia 6700 Slide:

Switch off the Nokia 6700 Slide Phone and take out the SIM Card
Start the Nokia 6700 Slide without SIM card
Ignore the message on Nokia 6700 Slide
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 6700 Slide phone is Unlocked

Note : If you are using the Nokia 6700 Slide phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 5330 Movie TV:

Switch off the Nokia 5330 Movie TV Phone and take out the SIM Card
Start the Nokia 5330 Movie TV without SIM card
Ignore the message on Nokia 5330 Movie TV
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 5330 Movie TV phone is Unlocked

Note : If you are using the Nokia 5330 Movie TV phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 2690:

Switch off the Nokia 2690 Phone and take out the SIM Card
Start the Nokia 2690 without SIM card
Ignore the message on Nokia 2690
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 2690 phone is Unlocked

Note : If you are using the Nokia 2690 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 2220 Slide

Switch off the Nokia 2220 Slide Phone and take out the SIM Card
Start the Nokia 2220 Slide without SIM card
Ignore the message on Nokia 2220 Slide
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 2220 Slide phone is Unlocked

Note : If you are using the Nokia 2220 Slide phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 1800

Switch off the Nokia 1800 Phone and take out the SIM Card
Start the Nokia 1800 without SIM card
Ignore the message on Nokia 1800
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 1800 phone is Unlocked

Note : If you are using the Nokia 1800 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.
Reply With Quote
#5
Old 05-10-2010
Andrew's Avatar
Andrew Andrew is offline
Member

Join Date: Nov 2005
Posts: 524
Re: Unlocking Guide for Nokia Phone
Nokia 1616:

Switch off the Nokia 1616 Phone and take out the SIM Card
Start the Nokia 1616 without SIM card
Ignore the message on Nokia 1616
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 1616 phone is Unlocked

Note : If you are using the Nokia 1616 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 1280:

Switch off the Nokia 1280 Phone and take out the SIM Card
Start the Nokia 1280 without SIM card
Ignore the message on Nokia 1280
Type #pw+CODE+1# on screen and press Call button
“SIM Restriction Off” will display on screen, Your Nokia 1280 phone is Unlocked

Note : If you are using the Nokia 1280 phone in Canada with the Fido or Rogers Network then you have to Type the different code on screen i.e. #pw+CODE+7#.

Nokia 6788:

Forza Motorsport 4 Walkthrough, Tips and Cheats

2012-02-05T08:18:00.001-08:00

Forza Motrosport 4 is a spectacular racing video game. This game is released for Xbox 360. Forza Motorsport 4 is the 4th series of Forza Motorspor. This edition supports Kinect sensor along with the regular controllers for Xbox. Forza Motorsport is more featured with better controls, races and tracks. It is an extensive game for racing game lovers. The game is equipped with an option by which you can import the profiles of Forza Motorsport 3. So if you have any better records you can import that here. It is also possible to transfer same credit and cars. For instance you can have a look on various video game demo online. There is additional feature in this game called Autovista. This allows the Kinect players to explore the race area and car.

This feature is not provided for all except for the Kinect users. Other than this with Xbox controller you can manage the gameplay. This game is more optimized for Kinect with many realistic features. Like the Kinect can track your movement to start the race and allows you audio commands. Other than you can create your car clubs and share the same.

Forza Motorsport series is one of the most famous and widely played video games on pc and on gaming consoles. It is a complete pack that every racing video game lovers want. From free play to championship to online gameplay you can compete with the best. Forza Motorsport series can be counted in the list of most impressive video games on Xbox. The new series has more surprises for the gamers. Like any other video game you get options here to upgrade and customize your car more efficiently. You have a better performance car and get upgraded class wise. The cars are divided into classes and series also varies. As you win up or keep upgrading you get chances to drive more new cars. The one thing which I want to emphasis here is the damage car model. It is much better. The game engine gives very really effect of car damage. This is well configured with the car handling and performance. Everything is set properly as per your gameplay.

Another feature which I told already before is the customization. More comprehensive list is available here. You have impressive customization option that let the gamers to simply modify the entire car as they want. With large number of cars and tracks you get option for long hours of play. The tracks are impressive which served majorly to the players who continuously play such type of game. I can say, this can be the most wanted racing game on Xbox. It is more realistic and well managed. I am not sure but they said that there are more than 300 cars available for this game. You can simply sell your car you want and buy also. This are done via game credits. Vinyl Creator is one which is liked by the players. You can see many customized cars here with awesome artwork. Artist to have options here design the car as they want. The Forza game community provides more options to the players to share their views. In simple words I can say Forza 4 is more realistic. It looks more life like gameplay. The cars are customizable and you can enjoy long races without any much disturbance. The game experience on Forza 4 Motorsport is awesome, doesn't matter which controller you are using. Some process is extremely complex here.

Reply With Quote
#2
Old 20-10-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Forza Motorsport 4 Walkthrough, Tips and Cheats
Beginners Guide for Forza 4 Motorsports

The game is kind of join and play. You can start with free play without going in much detail and have a look on the cars and tracks. I will recommend you to get familiar with the game controls. That is quiet necessary first to understand and do. There are some beginner’s tips here that I can recommend you to do. First ensure that you have enough space on your disk. The game has large files.

Begin a race. This will be your first race which will tell you a lot more about the game. You will understand the tracks and actual control of the game. The first race is somewhat beneficial to get easy with the controls. Try to best to get win and does not matter even if you loose. You have to win the race to get first Achievement unlocked. You can play the same multiple time till you win.

I had mentioned already above that it is possible to import Forza 3 profiles in this game. So if you have you can get your records on this game also with your game money. But there are certain kind of limitations. This is helpful and you do not need to begin the entire game back again.

Create your Player Card if you are first time playing this. You can do that by going in Play Career and then in My Profile. This player card is a kind of your profile with some info. The card also consist of badges which will be unlocked as you keep on getting a achievement.

You can get more support from Community. This is the place where you can create your own Car Club. You can use any name and achievement here. You need to go through start process by collecting some achievement to reach here. You can invite players to join your car club and start trading. In this Car club you can share your car with others. Go in your car collection and from menu choose share

The game is equipped with a feature called Autovista. You can see that in Main Menu. Autovista allows you to explore your car and you can take your time to get a complete review of the car. This is nice option later on you can see the cars that you can play with.

There are number of achievements in the game which get accomplished as you keep on racing. You can see that in Autovista. You can also find for what achievement and bonus you have to play.

Tuning a car is a another important part. You can find that in Play Career > Upgrade > Tune Setup. This option allows you to tweak the cars as per your need. You can make changes to your car and save the same.

Forza 4 Motorsport Car Control Guide :

In Forza 4 Motorsport you will find multiple game mode. This is somehow similar to Easy, Medium and so on till Expert Mode. The more difficult you play, the higher you achieves. Remember that car tuning also plays a important role in the performance and gameplay. You can choose the difficulty level as you want. There is nothing much to do in that. As you keep gaining.

More skills in that game you will learn how to properly control your car. Some stunts like drifting are quiet complex to handle but you can do that as per gaining experience. I had certain tips below which can be best assistance in the race.

As you gain skill your controls will become easier. Xbox does not have much buttons. The game provides you certain earrings from which you can get unlocks bonus items. But they are rare if you does not develop more skills.
Braking System : This is a bit tricky part. A right brake on correct speed gives you the most perfect drift. But that depends on your assumptions about the braking time and the car handling. When you are customizing your car look in details that you are not doing any major change to the breaking system. Don't perform any major changes or it can cause improper handling on curves.

Car Steering and Control : This is somewhat part which we avoid mostly. Many of us just want a kick start and move ahead. This is the place where we make mistakes. Do not steer over the limit. Keep stability as you can get a way out and you have complete control on your car. Just keeping the steer button pressed will not take car on top of list. This is because by steering to high you cannot take the right turn. It creates more issue on turnings. So at some situation keep you’re steering in control. Another important part is keeping the car stable on a firm track. You cannot let it move wildly over the track. Keep it firm and moving so you do not waste your time in controlling it. Sometime due to over steering and improper control the car flips over the track loosing your race.

Track Lines : Follow those track borders. The edges with spotted line. Keep a eye on them. They guide you some second before a turn and at that time you can get the right control. Stay at best speed on which you can control the car.

Wear and Tear : In this you can customize the car after race. I will recommend you to get a control on the damages. Appearance damages really does not matter much, but damage of car tyers and other stuff do matter in races. You can avoid cosmetics settings to some races.

Reply With Quote
#3
Old 20-10-2011
spookshow's Avatar
spookshow spookshow is offline
Member

Join Date: Nov 2005
Posts: 621
Re: Forza Motorsport 4 Walkthrough, Tips and Cheats
Beginning with Free Play Mode :

Start with Free Play Mode. This is like quick race. There are not much restrictions here. You will be in random race. Under free play mode you get certain options. You can choose the same to start. If you want you can start a Quick Race or take a Split Screen rating. Or else the last option is Hot Lap. The easiest is Quick Race. The mode is common and you are in a random car with random race. This also has special cars and tracks. It is possible to unlock many achievements here. This a perfect place to begin the race. Another mode which I had mentioned above Split Screen is for two players. You can compete with your friend via second Xbox Controller attached. Nice one to one gameplay. Hot Lap Mode is the place where you get more choices than Quick Race.

In this you can pick up a car and track where you want to race with laps. This is mostly the training part of game where you practice on number of tracks and cars to get the best time. It works very simple. I recommend you to start with this and play some number of levels here. You can see more improvements as the levels keep on passing.

Career Mode :

The above mode was free play. When you have gained enough skills you can start with Career mode. This mode officers more unlocks and demands more skills. There is a entire season which you have to start playing. There is a calendar which defines the number of races you have to play. This also derives many evens in the game. You can see your progress as you keep on achieving your goals. There are many types of races here. This are not on your choice, but pre-determined gameplay. The game assign you races as per the calendar year. There are many types of races available. There are certain kind of achievements associated with every race and mode. You have to achieve them even if the races are won. The time you do not collect those achievement it will not be counted in the progress.

Here you will get chance to play with various race formats and different car classes. It is new for a beginners but for an experienced this will be a challenged. Every car is classified to certain class. You can find the details in the game itself. Once you are finished or you win the race you get options for automatic upgrades. This are enabled by default where your cars and systems are upgraded, so that you can stand in the coming race. Begin with upgrading your cars first. You can start checking the class, the upgrades you want to do and other handling stuff. Spend some points to get new upgrades. Mostly a maximum work will be done by the Automatic upgrade stuff. This automatically optimizes your car for the race. You just need to understand what you can get benefit out of them.

Car List Forza Motorsport 4 :

Alfa Romeo
Aston Martin
Audi
Bentley
BMW
Bugatti
Chevrolet
Citroen
Dodge
Ferrari
Ford
GMC
Gumpert
HUMMER
Honda
Hyundai’s
Jaguar
Joss
Kia
Koenigsegg
Lamborghini

, please join my professional network

2011-12-26T08:11:00.001-08:00

@recipientfirstname, please take a moment and join my professional network

On Tuesday 6 December 2011, I invited you to become part of my network of contacts on ApnaCircle.

Kinds regards,

Kulwinder Kaur

> Accept my invitation and join my network now
(It only takes a minute to join)

So what is ApnaCircle ?
ApnaCircleis India's leading professional networking site. With millions of members across seven continents it's a great way to make sure that opportunities find you.At its simplest,ApnaCircle lets you publish a profile of your professional experience online and suggests otherprofessionals,potential partners/customers or even headhunters that you might want to connect with. It's also great for reconnecting with people you met at school, university or in a previous job.
But you can also do much more such as:

Ask Questions,
AdvertiseEvents,
Post anAd,
Write anArticle,
SendFree SMSs,anywhere in India,
Participate inforums, that match your interests and
Even find anew job as well as find theinstitutes/collegeswhich are offering many courses which you may be interested in.

Moreover,you can earn through SMS, Rewards and Points and many more, all on your New ApnaCircle.com

People you connect with, the more likely it is that the perfect opportunity will find you. ApnaCircle could be just the thing your professional career needs.

You're already on another social network? No problem.

It's fine to be on multiple networks. In fact, it just means you are even more likely to benefit professionally as your career or business will be even more visible. So don't delay...join ApnaCircle nowand benefit from being part of Kulwinder Kaur's professional network.

Your circle is more powerful than you think

You've received this email, because Kulwinder Kaur has invited you to join their network. At ApnaCircle , we don't like our members to bother you and we will contact a member if we believe they are abusing our service repeatedly.

Once you are a member of ApnaCircle , you can actually control who can send you connection requests, and you can always un-connect from the person who has invited you. If you really don't want to join, you can still get in touch with us at member support and we'll ask Kulwinder Kaur to stop inviting you.